Tank Ce Line Mover Float Parts

Only two screws hold the mount of the pump in the lower left near the floor. Easy access by removing the front covers then remove the two mounting screws to the pump assy. Then remove the intake and output hoses. I noticed on the new pump a male hose bib on the intake. Supplied with the dishwasher was the smooth intake water tube. Best to not reuse this supplied hose. It just won't clamp tight enough for a good seal. Cut a portion from a garden hose the same size as the intake valve bib... Read more

I would open door after initial fill and noticed little or no water. I also could not hear water flowing from control valve. I replaced the water control valve and issue resolved Read more

• Will not drain

Pulled dishwasher from the cabinet and flipped onto its side. Easy access to sump and drain flapper valve that I also replaced. Rubber sump coming apart into soft pills & chunks and plugging spray arms. Better now but it's rediculous that GE would make components that dissolve this way. Read more

• Will not fill with water
• overflowing

Initially we discovered the LE code was due to water in the base due to the over flow. Of course my warranty was up and 1 month later the DW finally stopped with this error. We pulled out the DW and soaked up the water in the sensor on the right side base where it collects water. This got rid of the LE error code. The LE error kept making the drain go constantly so we had to turn off the power in order to stop the draining. The drain activity would go constantly even after opening the door... Read more

• Will not fill with water

Saw the same problem described by other users. The part was very reasonably priced, so I took a chance that it was the cause of the problem. Part showed up within 2 days ! I installed it same day, and turned on the dishwasher.... and it worked ! Great to have my dishwasher back. Appliance pro's is awesome ! //Greg Read more

• Will not fill with water
• overflowing

The insulation in my old Ohio house is terrible, and the Valve Assy, Inlet part under my dishwasher must have froze and burst when the temperature outside got below 0. I ordered this part here, and literally got it the next day. Awesome. The how-to video on the site was perfect. Not only did I replace the part in about an hour, but I saved ~$200 by canceling my LG service repair appointment. Read more

Had to remove all three food drawers and the back panel behind the drawers (4 screws). The water tank comes with the associated tubing which would typically require access to the back of the fridge to run the new lines. Instead I clipped the existing lines inside the fridge. Then I clipped the lines off the new tank so they would line up with the old lines. I then used a 5/16" OD compression coupling (Lowes or Home Depot) to connect the ends of the tubing together. The joined tubes are... Read more

I ordered the part plus I replaced all of the other rubber/plastic parts just in case. My dishwasher is ten years old and still works great. Read more

• Will not drain

I checked the drain hose for blocking at the garbage disposal and then at the connection point to the dishwasher. The hose was clear and nothing was obviously obstructing where the drain hose connects to the dishwasher. At this point I Googled the model number with the term "will not drain" and immediately landed on the AppliancePartsPros.com website. At the Drain & Wash Impeller Kit page amazingly had a video showing the technician replacing the impeller on a dishwasher essentially the same as... Read more

Ordered tank and heater, installed, so far so good. Thanks for the speedy order Roman Read more

First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more

I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more

• Will not drain

So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more