Need Help?
Call
Replacement shelf frame that sits above the crisper drawer in your refrigerator. Order a new frame if yours is cracked, broken, or missing mounting holes.
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
Replacement crisper pan for storing fresh produce in your refrigerator. Order a new pan if yours is cracked, broken, or missing. Direct fit part.
Changed out the valve and cleaned the lines out Read more
Replacement front cover for refrigerator door bins. Snaps into place to keep items secure. Needed when original is cracked, broken, or missing.
Ordered replacement. Read more
Structural frame that holds the deli drawer in place under the glass shelf. Replace if cracked, broken, or missing to restore proper drawer support.
Replaced holder with part ordered from AppliancePartsPros. Part arrived 2 days after I placed the order online, and price was competitive. Most time-consuming thing about repair job was moving items out of fridge and back in :-). Read more
The Snack Pan Rail is an OEM part for GE refrigerators. It is an integrated shelf component located in the fresh food door that secures GE snack trays and additional food storage accessories. The metal rail measuring approximately 14 1/2" L x 11" W, provides sturdy support within the refrigerator opening. Causes of a bad snack pan rail can include dents, warping, or cracking that compromises its structural stability over time. Improper handling may also cause damage. Symptoms of a bad snack pan rail include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced with new rail. Easy fix. Just remove the shelf,side broken rail off install new one Read more
Ice won't dispense or auger cracked? This refrigerator ice bucket and auger assembly stores and moves ice to your dispenser. Easy DIY replacement.
Just bought the whole assembly and slid it in. Read more
Replacement right door bin shelf assembly for refrigerators. Installs on right door for beverage and condiment storage. Replace if cracked or broken.
Slid out old bin and replaced it with the new one. No tools were required. Read more
Clear plastic door shelf bin for refrigerator storage. Installs on refrigerator door to hold condiments and beverages. Replace if cracked or broken.
We received the correct Door Shelf Bin. Fit perfectly. Read more
The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep
Symptoms that may indicate the need to replace the freezer door shelf bar include:
Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Replaced with no problem. Exact fit. Less than 5 minutes. I will order from your company again. Arrived on scheduled date. Read more
Ice maker not making ice or leaking water? This complete ice maker assembly fixes frozen, jammed, or non-ejecting ice issues. DIY-friendly replacement.
After ordering the part, I first watched the video several times. Then I placed my phone on my workspace so that I could start and stop the video when following the step-by-step instructions. Then I shut down the refrigerator circuit breaker while I removed the ice container and full ice maker components. I then closed the refrigerator doors to keep the cold air in. I kept starting and stopping the video as I went, as I unplugged wiring components, connection jumpers, the ice maker shutoff... Read more
This is the bottom crisper drawer that slides into the lower section of the refrigerator compartment, designed to store fruits and vegetables at optimal humidity. It is a plastic bin that sits on drawer rails beneath the crisper cover or shelf. Replace this drawer if it is cracked, warped, or if the slides no longer allow it to open and close smoothly.
Ordered new drawer from your company. It fit beautifully. Thanks. Read more
Control panel not lighting up or buttons unresponsive? This dishwasher user interface board restores cycle selection and display functions. Moderate DIY.
The control went thru a month or so of erratic behavior; the display would come on and flash and beep without any input on my part. Then it died completely. I did a little research on the GE website and determined likely cause waa a defective user interface board. I found AppliancePartsPros.com and contacted their tech support, who directed me to check the output of the control board across 2 pins for 13.5v DC. I did this, and measured 13.8v, so control board was good. When I reconnected the... Read more
Replace a broken, cracked, or missing door shelf rail on your refrigerator. This rail secures items on door shelves, preventing them from falling out.
Followed directions. Read more
Cracked or broken ice bucket causing leaks or ice spillage? This refrigerator ice bin stores and dispenses ice. Simple DIY fix in 10-15 minutes.
I took apart the old bucket with a screwdriver and put the new one with no problems. Read more
Replace your cracked, broken, or missing refrigerator glass shelf. Transparent design provides storage space and visibility. Fits in main compartment.
Found the shelf I needed and was cheaper than branded website. Shipped quickly and now I am much happier with my refrigerator. Read more
This is the crisper drawer cover assembly that sits on top of the crisper drawers in the refrigerator compartment, featuring a glass insert within a plastic frame. It acts as a shelf while also helping maintain humidity levels in the crisper bins below. Replace this cover if the glass is cracked or shattered, if the frame is broken, or if it no longer sits level on the drawer supports.
I had to purchase the whole glass and support for the drawer and throw out the old glass and everything but the support brackets from the original. Had to remove the support brackets from the original drawer support and install them on the new one. Easy job just a lot of wasted product for a small broken piece. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.