Need Help?
Call or text
Replace your dishwasher's control panel touch pad if buttons are unresponsive, cracked, or corroded. Installs on front of door to restore function selection.
This is a relatively easy repair. Here are detailed instruction to replace the Control Panel. Tools Required: #15 and #20 Torx drivers. (Power tools not recommended) THE INNER SHELL DOES NOT HAVE TO BE COMPLETELY REMOVED There are 10 perimeter screws that secure the inner shell (#15) to the outer shell and six screws, three on each side (#20). Two of these screws secure the Controller Bracket and 4 that secure the spring loaded hinge to the inner shell. These six screws don't have to be... Read more
Secures the water filter and maintains watertight seals to prevent leaks. Replace if cracked or leaking at tube connections to restore water flow.
It's bit of a chore in that on my Whirlpool Refrig you need to remove the grill on bottom front and the Utility Panel on bottom rear. Then unscrew the original filter housing and pull it out through the back of utility opening. Remove the two water hoses and put them into new filter house. Reverse the disassembly process to reinstall new filter housing. I'm old and slow so the process took me about 45 minutes. (Note: Unplug electric and turn off water inlet before starting.) Read more
Fix cracked or worn dispenser buttons with this refrigerator control panel overlay. Easy peel-and-stick installation takes 15-20 minutes with basic tools.
1. Purchased a new Facade. The removal of the old one was relatively easy except that the two screws that hold it in place (behind the spill tray) were rusted (they should have used stainless steel ones) one came out with a vise grip but on the other I had to buy an "Easy Out" tool from Home Depot, once out the unit drops down. Had my wife hold the new unit, swiped the wires from old to new, removed the control board from the old one and installed it on the new one with one screw and cleaned... Read more
Replace your dishwasher's control panel touch pad assembly when buttons stop responding, lights blink erratically, or the panel is cracked or damaged.
Replaced front panel. Thought it might be the control board, but replaced the front panel first and the problem was solved. Read more
Touch pad overlay for electric and gas ranges. Covers the control panel with clear markings for settings. Replace if cracked, warped, peeling, or worn.
I installed a new clock timer and overlay the job took only a few minutes and a very easy repair. Useful hint take a picture of your clock timer before you start to make sure all your wires are put back in the right order . Charles B Lafayette Tn Read more
Captures cooking grease and smoke particles to maintain clean air. Replace when clogged or damaged. Measure your existing filter to confirm fit.
We ordered new filters from AppliancePartsPro.com one afternoon. The next afternoon we were very surprised to receive the order! We removed the old filters, installed the new filters, and we are now using our ventilation. Read more
Protective overlay cover for range control panel. Replace if cracked, scratched, worn, or labels are fading. Installs over the control board buttons.
I replaced the control board. Repair company wanted $395.00. I ordered the board for 140ish, 5 days later, 9 screws, 6 moduler plugs....working oven. The hardest part was pulling out the stove. Read more
Console assembly with integrated touch pad for your dishwasher door. Replace if buttons are unresponsive, panel is cracked, or display is damaged.
Searched Google for error code, found some info indicating the touch pad was the problem. The info I found was not completely clear. I was concerned I might order a part that would not solve the problem, but with the return policy I figured it was worth the shipping cost to try the repair myself. Ordered and replaced the part. Problem solved. Read more
White faceplate graphics overlay that covers and protects your range control panel. Replacement needed when scratched, cracked, discolored, or peeling from heat.
Ordered a new Faceplate Graphics, removed old faceplate and installed new. Required removing control panel with switches and display, including 10 screws to get to the faceplate. Faceplate has glue on rim, so had to peel off old faceplate, remove residue, then put on new. Not difficult, but reaching to remove the screws was a little challenging in a small kitchen. Now unit looks brand new! Read more
Bypass cap allows your refrigerator to operate without a water filter. Install when using external filtration or to restore water flow. Verify fit.
It was a snap, literally. Snapped out the old water filter and snapped in the new water filter bypass, that simple. Read more
Protective label overlay for range control panels. Replaces torn, ripped, or peeling overlays. Adhesive film installs over electronic control board buttons.
Ordered a new overlay and was extremely pleased with how fast I received it. Installed the overlay on the control board and the range is as good as new. Thanks again for your prompt delivery. Read more
Holds the filter cartridge and seals water lines to your dispenser and ice maker. Replace if cracked or leaking to restore proper flow. Confirm fit by model.
Disconnect the housing carefully from water line (push and release) and replace with new parts Read more
Adhesive overlay that restores faded or damaged button labels on your oven control panel. Replaces worn, bubbled, or peeling faceplates.
I went to the Appliance Parts Pros website and spoke with Shawn in customer service via the chat option. He was very helpful and suggested I order the thermostat for my stove. It arrived in about a week and I installed it the same day. It was a very easy install with the exception of the wiring harnesses didn’t match so I had to splice the wires together. It worked perfectly and now my stove is working like new. I really appreciate everything Shawn did to assist me and make this project much... Read more
Adhesive graphic overlay that labels buttons on your range control panel. Replace when worn, peeling, faded, or unreadable to restore clear keypad labels.
Replaced the control board and panel. Read more
Adhesive overlay that restores printed labels on your range's clock and timer control panel. Replace when graphics are worn, faded, or peeling.
Looked for solution on YouTube, found the possible solution. Looked up part number on AppliancePartsPros. Ordered it came in two days. Took of back, removed old board. Put in new board. plugged it in. Put back together. Worked fine. 1 hour start to finish. Cost was at least 2/3rds less than a new gas range. Read more
Touch-sensitive keypad behind your range control console. Replace when cracked, worn, or buttons stop registering presses. Installs in control panel.
I looked online for possible repair solutions when the range would not turn off. I found that the membrane switch goes bad on these models. I looked online for available parts and Appliance Parts Pros had the item in stock. I ordered and it was here the next day. After receiving the part, again, I looked online for how to replace the membrane switch and youtube video walked me through the steps. It took about an hour and now it works like new. Read more