Line Hook Line Mover Regular Spring Parts
Genuine Ge part
By: Ge
Part Number: WH10X10008
Washer won't start or door won't lock? This door lock motor and switch assembly fixes both issues. Moderate DIY repair requires removing screws and gasket.
Do-It-Yourself Stories from Customers like You
Wash cycle would not start faint click instead of normal door lock sound Jeff N. • Charlotte , NC • August 16, 2019
Replaced door lock. It required removing the two screws around the lock, pulling the spring hoop wire from around the door gasket, and then disconnecting the two wire terminals from the lock. Reverse with the new part.
After cracking open the old lock the failure was caused by a thin plastic tab breaking off.
I also bought the door switch since it's cheap - just in case the problem was not the lock. But the door lock was the fix.
Read more
More
$167.95
- Compare At:
-
$198.18
- You Save:
-
$30.23
Genuine Ge part
By: Ge
Part Number: WH16X543
Suspension rod and spring assembly supports the washer tub and reduces vibrations. Replace if cracked, worn, or broken to restore proper tub support.
Do-It-Yourself Stories from Customers like You
Ge washer was shaking / vibrating excessively during rinse / spin cycle Marcel S. • Orlando , FL • June 30, 2015
I replaced all 4 suspension rods and springs and now it spins very smooth. They weren't broken, just badly worn. It gave new life to my 15 year old GE Profile washer. They are basically springs, so they wear after a while. It was well worth the hour I spent fixing it. You need a good long reach to get to the back 2 and you have to take off the dampening straps and the control panel so you can gain access. All in all, I'm happy with the repair, although I though that these parts are bit...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 134144700
Replaces cracked or broken suspension springs that support the drum in front-load washers. Installs at top of tub assembly. Sold individually.
Do-It-Yourself Stories from Customers like You
Not spinning heavy loads. Jim S. • Midlothian , TX • December 05, 2017
Replaced springs and shocks.
Read more
More
$59.50
- Compare At:
-
$70.21
- You Save:
-
$10.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Ge part
By: Ge
Part Number: WH01X20823
Fix a washer door that won't stay closed or latch properly with this door plunger. Resolves issues with doors opening mid-cycle or failing to lock securely.
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: 33002459
Maintains tension on the idler arm to keep your dryer belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Do-It-Yourself Stories from Customers like You
Screeching metal on metal Brian M. • Louisville , KY • August 09, 2015
I replaced drum rollers, axle shafts and front bearing kit. Still had noise. Ordered Idler Arm, Belt Tension Pulley & Washers. I ordered parts at 3:30 pm on a Wednesday, received new parts at 11:30 am Thursday. The instructions & videos were very simple to follow and provided excellent tips. Back up and running with silence in an 1/2 hour. My 13 year old dryer is running like new again. Way cheaper than calling a repairman.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Lg part
By: Lg
Part Number: 383EER3001G
Replaces worn or broken shock absorbers that stabilize the drum in your washer. Installs at the base of the tub to dampen vibrations during spin cycles.
Do-It-Yourself Stories from Customers like You
Worn out bearings Linda B. • San Diego , CA • November 23, 2015
After watching the video carefully and taking notes for step-by-step dismantling of the LG washer, I took it apart methodically placing each item on a table in the order removed. I was able to remove and replace the bearings with no problems following the tips and tricks. The spider did not seem to be in bad shape but since I had a new one, it seemed reasonable to replace it as well, but it was difficult to extract the old one from the drum. The bolts are assembled with weld glue, so it is a...
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10156812
This small spring is part of the door interlock system in your microwave, providing tension to the safety switch mechanism that detects whether the door is properly closed. It ensures the microwave will only operate when the door is securely latched. Replace this spring if the microwave does not start, runs with the door open, or the door interlock switch is not engaging correctly.
Do-It-Yourself Stories from Customers like You
Microwave would not work, bad door switch. Gregory P. • Houston , TX • December 10, 2018
Checked switch with a voltmeter, determined the switch was bad. Ordered a new switch....watched a short how to you-tube video.....and from there.....it was fixed.
Read more
More
$11.78
- Compare At:
-
$14.14
- You Save:
-
$2.36
Genuine Ge part
By: Ge
Part Number: WH12X10276
Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Bad lid switch on a ge washer wouldn't agitate or spin David C. • Saline , MI • October 26, 2015
Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in.
Read more
More
$19.31
- Compare At:
-
$22.79
- You Save:
-
$3.48
Genuine Speed Queen part
By: Speed Queen
Part Number: D510177
Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dryer door would not close, door catch was broken. Judy J. • Caledonia , MI • December 17, 2019
I called a local appliance store that gave us a replacement. That one broke after 1 week! The door was off balance. Tightened screws to realign. I found your store online and ordered the part. Arrived in 1 day! The part is much stronger than the first one. So far so good!
Read more
More
$7.77
- Compare At:
-
$9.25
- You Save:
-
$1.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W11513250
The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure.
Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.
Symptoms of a defective lid strike include:
- The washer lid not latching properly or staying securely closed
- Water leaks around the lid seam
- Error codes related to the lid not locking
- Difficulty opening the lid fully after cycles
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers.
Do-It-Yourself Stories from Customers like You
Maytag locking mechanism broke so machine would not function Sandra M P. • Rancho Palos Verdes , CA • August 16, 2026
We ordered a new locking mechanism, latch and cover, and followed the directions that we found on UTube.
Worked perfectly.
Read more
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368999
This small spring is used in the dishwasher detergent dispenser assembly to control the opening action of the detergent cup door. It provides the tension needed for the cup door to pop open at the correct time during the wash cycle to release detergent. Replace this spring if the detergent cup fails to open during a cycle, the door pops open prematurely, or you find undissolved detergent remaining in the dispenser after a wash.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491700
Stabilizes the washer tub during spin cycles. Replace worn or broken rear shock absorbers to restore smooth operation and prevent drum contact with cabinet.
Do-It-Yourself Stories from Customers like You
E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove...
Read more
More
$78.95
- Compare At:
-
$93.95
- You Save:
-
$15.00
Genuine Samsung part
By: Samsung
Part Number: DC61-02740A
Secures the lint filter cover in your dryer. Replace if the spring is missing, broken, or damaged, causing the filter cover to not stay in place properly.
Do-It-Yourself Stories from Customers like You
Cover filter was broken on end spring missing (wife missplaced it when found) David F. • Richland , WA • April 24, 2016
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....!
Thank You
Dave
Read more
More
$6.41
- Compare At:
-
$7.63
- You Save:
-
$1.22
Genuine Ge part
By: Ge
Part Number: WH01X10606
This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.
- Maintains proper tension on the shift mechanism between agitate and spin
- A worn or broken spring can cause no spin, no agitate, or loud shifting noises
- May also lead to intermittent shifting or incomplete cycles
- Restores consistent mechanical engagement of the drive system
What's included: One shifter spring Install notes:
- Unplug the washer and shut off water supply before servicing
- Access is typically from the cabinet/rear; support the tub to prevent movement
- Note spring orientation and attachment points before removal
- Use needle-nose pliers or a spring tool; replace any severely worn mating parts
Do-It-Yourself Stories from Customers like You
Turns out just my agitator was broke and cracked someone left heavy nail clippers in a small load of clothing Renee H. • Culver , OR • April 22, 2026
It was super easy- Pop off the top where the fabric softener goes- undid bolt pop out the agitator ( the hardest part getting this out and the new one in). Got the new one lined up push in place use a rubber mallet to secure put in bolt and good to go
May I say this company is excellent- great customer service and delivers as said 5 stars all the way.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491701
Front shock absorber kit stabilizes the washer tub during spin cycles. Replace worn, loose, or broken dampers to restore smooth operation and stability.
Do-It-Yourself Stories from Customers like You
Washer turned into a bucking bronco. Anthony M. • Peyton , CO • May 23, 2020
I tore it apart using. YouTube videos to guide me and found the shocks were loose and floppy. I found the shocks in stock here and had them in my hand 2 days later for only $10 shipping! It runs great now!
Read more
More
$169.95
- Compare At:
-
$203.94
- You Save:
-
$33.99