Englander Small Engine Ignition Coil Parts

Fridge keept building up ice in defrost drain drain in freezer. Once the drain pan filled with ice it drips into fridge compartment. After taking things apart three times to thaw it out, decided to replace defrost components - heater and temperature switch. In addition to new parts, also added a 12 gauge copper wire hook that hangs from defrost heater into the defrost drain. After this, the defrost cycle is running as expected, but will not know if the issue is corrected until a year or so... Read more

After verifying the no heat problem myself, I just googled "LG3412W no heat" with my smartphone and thumb. One of the first hits was the Appliance Parts Pros website with a list of 8 possible parts that might fix this problem, listed in descending order of likelihood of success. With 3 adults worth of dirty laundry piling up and straining our ability to drip dry, I had to agonize over: 1) buying a new dryer from whatever a local dealer had in stock, then clearing years of valuable junk in... Read more

Replaced the following parts but did not fix the problem: -Thermister -Thermal fuse -Radiant sensor -Ignitor -Therm The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working. Read more

My husband, who was the FIX-IT repair man at our house, passed away in March. When our bake element burned out my son, who is 18 looked at me and I looked at him and we shook our heads! We hunted on the oven till we found the serial number. We googled for GE OVEN repair parts and up popped AppliancePartsPros. We found the element, ordered it, watched the DETAILED VIDEO on how to change it out. The part came the next day. Philip had the old one out and the new one in in less than 10... Read more

1st. replaced thermostat probe inside wall oven - no change. Then removed range heating element and measured it with ohm meter for continuity and found it to be OPEN. Ordered replacement range heating element; measured it before install and found it to be a few ohms - installed in less than 5 minutes and tested. ALL WORKS GREAT. Both items purchased with shipping were just over $100. (I chose to keep the thermostat probe instead of returning it being the oven is just over 10 years old). Read more

It was a very quick repair that took less than 5 minutes to fix. Read more

Put in a new 6" surface burner. Read more

• Element will not heat

This repair was on a GE glass Cooktop range. This range has two indicator lights, a Burner On light, and a Hot Cooktop Light. The problem I was having was, the Hot Cooktop stayed on all the time (24x7), even when the cooktop surface had been off for hours and was cold. YouTubes that I viewed were all misleading on this symptom. They all pointed to the switch, which is the fix for the Burner Light staying on, not the Hot Cooktop Light staying on. I figured it out by going to the schematic.... Read more

Pulled up you tube, watched video, ordered part, and installed. No problems Read more

• Little to no heat when baking

I visited Appliance Pros website and indicated the problem we were having etc. Found the suspected part (heating element), went on YouTube and found out how to remove the part from the oven and test it with a multi-meter. Keep in mind I have never used a multi-meter before or made repairs to an oven before. However, I have used Appliance Pros before to fix a refrigerator problem just a month earlier and after watching their video it was a very easy repair. Anyway, I tested the old convection... Read more

Replaced the oven heating element Read more

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

• Frost buildup
• Doesn't shut off

I have had the unfortunate problem of fixing this previously, so knew what to order. I ordered the defrost sensor and heater... and replaced both. Honestly, all I needed was the sensor I did and ohm test and got 0 on it... meaning it was bad, but just in case I replaced the heater. The fridge works great now, but I would suggest if this is your first time with this issue, remove the panel, unplug both sensors from the fridge, and do and ohm test while they are still in the fridge... and then... Read more

• Little to no heat when broiling
• Element will not heat

Replaced it. Read more

I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more

Going on line and viewing your website, you provided a very easy way to get me to a picture that was exactly what I wanted with the exact (old style) connections. I had previously gone to Home Depot twice, and I still did not get the correct burner that I needed. Your website was great, I should have gone there first. I used the part that I received from AppliancePartsPROS.com and replaced the defective, old and non-working surface element. It was easy, I used a screw driver to snap off a... Read more