Igniter Bake Parts

Best Seller

Genuine Ge part

8-Inch Surface Burner Drip Bowl (Coil Element)

By: Ge

Part Number: WB31X46066

This 8-inch drip bowl sits beneath the surface coil on your range to catch spills and support the element. Replacing a rusted or stained bowl refreshes the cooktop and helps the coil sit level for reliable heating.

Collects drips and boilovers under the 8-inch surface coil
Positions and supports the element over the receptacle
Helps keep the cooktop cleaner and easier to maintain
Common signs to replace: heavy staining, rust/corrosion, warping, holes, or the element not sitting level

What's included: One 8-inch drip bowl. Install notes:

Disconnect power and allow the cooktop to cool completely
Lift the coil element slightly, then pull straight out of the receptacle
Remove the old bowl, align the notch/orientation of the new bowl, and seat it flat
Reinsert the coil element terminals fully into the receptacle and verify it sits level

Do-It-Yourself Stories from Customers like You The surface burner wouldn't heat. (mr) Kim B. • Amarillo , TX • February 17, 2023

Ordered and replaced it with a new 8" Surface Burner from you. Read more

$166.50

Compare At:: $185.00
You Save:: $18.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Igniter Glowbar

4.8 (12)

By: Ge

Part Number: WB13X25262

The Igniter Glowbar is an OEM part for GE ovens. It is responsible for igniting the gas to start the burner, ensuring efficient and safe operation of the oven. This component heats up to a high temperature to ignite the gas, enabling the oven to reach and maintain the desired cooking temperature.

Over time, the igniter glowbar can wear out or fail due to repeated heating and cooling cycles, exposure to food spills, or electrical issues. Causes of a bad igniter glowbar include filament breakage, electrical component failure, or contamination from debris.

Symptoms of a bad igniter glowbar include:

The oven not heating up
The burner not igniting
A noticeable delay in ignition
The igniter not glowing when the oven is turned on

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge gas range double oven lower oven would not ignite Susan L. • Rochester , NY • May 18, 2015

Removed bottom flame cover in lower oven to find the ignitor was actually broken into pieces. We assume it exploded because the bottom side of the cover had a hole blown in it and had to be hammered flat. Before it totally stopped working we had experienced a number of instances where the GFI kicked out when the oven was preheating. Order the GE specific replacement part from Appliance Parts Pros which arrived promptly. The replacement was fairly simple...being careful not to damage the new... Read more

$78.48

Compare At:: $94.18
You Save:: $15.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Samsung part

Range Bake Element Bottom Heater Sheath

4.9 (29)

By: Samsung

Part Number: DG47-00038B

The Range Bake Element Bottom Heater Sheath is an essential component for maintaining the efficiency of your range's baking function. This genuine OEM part ensures a perfect fit with your Samsung range, providing reliable performance and durability. Designed to protect the bottom of your bake element, it helps prevent damage from spills and debris, extending the lifespan of your appliance. Installing the Range Bake Element Bottom Heater Sheath is straightforward, allowing you to restore your range's functionality quickly and easily. By using this genuine OEM part, you can enjoy consistent and even heating during baking, enhancing your cooking experience. Specifically crafted to meet Samsung's high-quality standards, it guarantees optimal compatibility and performance. Whether you are repairing an older range or replacing a worn-out component, the Range Bake Element Bottom Heater Sheath ensures your appliance operates smoothly and efficiently, providing you with the dependable performance you expect from your kitchen equipment.

This part fixes the following symptoms

Won't start
No heat

Do-It-Yourself Stories from Customers like You Samsung range lower element replacement Stan H. • Alvaton , KY • March 05, 2016

Unplugged range, removed back panel. Loosened plug block from range, unhooked wires from existing element, then sliced through insulation between element ends with sharp knife. Removed screws holding element ends then removed element. Inserted new element, screwed it in place, connected wires and replaced plug block. Vacuumed up fiberglass insulation dust and replaced back panel. Replaced plug then tested. Read more

$143.95

Compare At:: $169.86
You Save:: $25.91

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Kit

4.9 (28)

By: Ge

Part Number: WB44X134

The Oven Broil Kit is an OEM part for GE ovens. It includes the broil element, which is responsible for generating high heat from the top of the oven to broil food. The broil element, which has screw-on terminals, measures 11-3/8" wide and 15-5/8" long from the mounting bracket to the end of the element. The distance from the bracket to the terminal end is 1-5/8".

You should replace this broil kit if it fails to heat properly. Causes of a bad broil kit can include electrical faults, such as short circuits or open circuits in the element, physical damage from accidental impact, or wear and tear over time.

Symptoms of a bad broil kit include:

The broil element not heating up
Uneven broiling results
Visible damage or burns on the element
The oven tripping the circuit breaker when broil mode is activated

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You I needed a new gasket, the broiler element had burned up and the light lens was broken many moons ago Paula B. • Scenery Hill , PA • June 22, 2017

I have had this oven for 40+ years. It is an enamel oven, something that you can no longer buy. Because I did not wish to buy new, I decided to service it myself and searched for the parts I needed. AppliancePartsPros.com was the only site to offer all three parts, so many having been discontinued by other providers. I replaced the oven gasket, the broiler element & the lens without any difficulty. I have replaced the bake element previously as well. I am very grateful that I was able to keep... Read more

$36.25

Compare At:: $43.14
You Save:: $6.89

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Top Burner Igniter

4.9 (15)

By: Whirlpool

Part Number: WP74009336

The Top Burner Igniter is an OEM part for Whirlpool gas cooktops and ranges. This thin metal coil provides the spark to light the burner flames during startup. It is a spark electrode with a male spade connection.

Causes involve cracking of fragile ceramic insulator casings allowing moisture ingress, compromised electrical connections cutting off sparking ability, or general wear reducing spark output strength.

Symptoms of failure consist of:

Inability to light one or more front gas burners
Click sounds but no flame present when turning burner knob
Safety issues arising from unlit gas accumulating

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Burner would not lite Stan N. • South Ogden , UT • August 09, 2014

Replaced igniter---works great---saved service call. Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Heating Element

5.0 (8)

By: Ge

Part Number: WB30X24400

The Surface Heating Element is an OEM part for GE ranges. This element is responsible for providing heat on the stovetop, allowing you to cook food efficiently and precisely. It ensures even heat distribution across your cookware, contributing to optimal cooking performance.

Causes of a bad surface heating element can include wear and tear from regular use, damage due to spills or impact, or electrical issues such as short circuits. Over time, these factors can lead to the element malfunctioning or failing to heat up.

Symptoms of a bad surface heating element include:

Element not heating up or only partially heating
Uneven heating across the element
Visible damage or burn marks on the element
Sparking or unusual noises during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Heating element not getting hot. Roger C. • Newton , IL • August 22, 2019

The heating element contact ears and the terminal block contacts were burnt on the existing burner. I ordered the new terminal block kit and surface heating element from Appliance Parts Pros. Delivery was exceptionally fast (I just used regular shipping). The new terminal block kit came with very long wires, so I cut them and installed new terminal ends, rather than zip-tie the long wires together. Very happy with repair. Read more

$72.59

Compare At:: $85.66
You Save:: $13.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Broil Element

4.9 (38)

By: Whirlpool

Part Number: WPW10310249

The Broil Element is an OEM component for Whirlpool ranges. It is a vital heating component located at the top of the oven cavity that provides intense radiant heat for broiling functions.

Symptoms of a bad Broil Element include:

Inability to engage broil mode
Poor or negligible heating from the broiler
Tripped circuit breakers when trying to broil
Visible cracks, breaks, or damage to the broil element

Causes of failure can include deterioration over many heating and cooling cycles. Metal fatigue from constant expansion and contraction eventually causes cracking or breakage.

This replacement broil element also fits Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You The broiler element in the top oven of my 12 year old maytag gemini broke and caught fire Adrienne L. • La Mesa , CA • November 14, 2014

I had the choice of spending $2K on another double oven stove or $60 on two elements. (I felt more secure about replacing both bake and broil elements just in case the fire had damaged the bake element) It was an easy decision and quick replacement! Power was already off to the stove so I cleaned up the fire retardent mess. I even found easy instructions dismantling the oven door in order to clean the powder residue from between the glass. I then removed the rack and remaining old elements. I... Read more

$78.95

Compare At:: $93.95
You Save:: $15.00

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Unit Broil Asm (Dlx)

4.8 (25)

By: Ge

Part Number: WB44T10043

The Broiler Assembly is an OEM replacement part for GE range. Located inside the oven, it houses the heating elements responsible for the broil cooking function.

Causes of a bad broiler assembly can include cracked or burnt-out heating elements that no longer ignite, damage from accidentally being cleaned with abrasive chemicals, or warping of metal components from overheating.

Symptoms of a bad broiler assembly include:

Inability to activate or incomplete activation of the broil setting
Reduced or uneven heating from compromised elements
Warping or discoloration visible on assembly surfaces
Presence of unusual odors from potential heating element failures

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element was burned and melted Victoria L. • San Diego , CA • January 21, 2015

I ordered the replacement part; after it arrived, I turned off the power to the oven - watched the video on how to replace the part, which was fantastic as it told me to make sure when I disconnect the old element not to let the wires fall behind the oven (that would have been a big problem b/c it's a wall oven) - However, one wire still slipped back a little - so I used needle nose pliers to retrieve it. Was able to plug the new one in - screw it into place with the original screws. I made... Read more

$84.32

Compare At:: $99.50
You Save:: $15.18

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Element

4.5 (2)

By: Whirlpool

Part Number: W11321472

The broil element is an OEM replacement part for Whirlpool ranges. It provides intense heat from above to brown and crisp foods like breads, meats, and vegetables.

Causes of a bad broiler element include scaling or charring developing on the coils over many cooking cycles. Wiring damage from cleaning chemicals is also possible.

Symptoms of a failed element include:

Incomplete or uneven browning of broiled foods
Reduced or inconsistent heat output
The element making popping/crackling noises when in use
Safety issues like exposed coils or wires posing burn risks

This OEM replacement is compatible with KitchenAid, Jenn-Air, and other brands.

Do-It-Yourself Stories from Customers like You No heating for baking. George C. • Albany , WA • September 01, 2023

Replaced both bake and broil elements. Read more

$72.55

Compare At:: $86.33
You Save:: $13.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Surface Burner Spark Electrode

4.6 (27)

By: Whirlpool

Part Number: WP8523793

The Surface Burner Spark Electrode is an OEM part for Whirlpool gas ranges. This electrode is responsible for generating the spark that ignites the gas burner, allowing the burner to produce a flame for cooking.

Over time, the spark electrode can become faulty due to exposure to high temperatures, grease, and general wear and tear. This can lead to unreliable ignition or complete failure to ignite the burner.

Symptoms of a bad surface burner spark electrode include:

The burner not igniting
Weak or intermittent spark
Clicking sound without ignition
Burner flame going out soon after ignition

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Element will not heat
Won't start
Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Broken stove top burner ignitor James C. • Randallstown , MD • January 31, 2015

Replaced ignitor. Read more

$33.95

Compare At:: $40.06
You Save:: $6.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Burner Ignitor

4.9 (78)

By: Whirlpool

Part Number: WP9782065

The Oven Burner Ignitor is an OEM part for Whirlpool ranges. This part ignites the gas burner in the oven, providing the necessary spark to start the combustion process that heats the oven.

Causes of a bad oven burner ignitor can include wear and tear from regular use, buildup of food debris or grease, or electrical issues such as a burned-out element or faulty connections.

Symptoms of a bad oven burner ignitor include:

The oven not heating up or taking a long time to reach the set temperature
The ignitor not glowing or sparking
Unusual clicking or buzzing noises during ignition attempts
The smell of gas without ignition when the oven is turned on

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Gas igniter glows, but will not light
Little to no heat when baking
Won't start

Do-It-Yourself Stories from Customers like You Intermitten mini explosions in the oven when trying to use Jerry L. • Canton , GA • December 28, 2015

Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years... Read more

$120.25

Compare At:: $143.10
You Save:: $22.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Igniter

4.7 (3)

By: Whirlpool

Part Number: WPW10324738

The Oven Igniter is an OEM part for Whirlpool gas ranges. It is responsible for generating the spark needed to ignite the gas burner.

Causes can be standard wear and tear on the delicate metallic coil. Additionally, food or liquid spills may lead to premature breakdown or surface corrosion.

Symptoms of a faulty igniter include:

Oven or burners failing to turn on or stay lit
Requires repeated attempts at ignition before activating
No spark or glow seen through the observation window

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The upper burner in my oven would not ignite Jesse L. • Mustang , OK • December 17, 2019

Replaced the oven igniter Whirlpool Part Number WPW10324738. Read more

$188.43

Compare At:: $224.23
You Save:: $35.80

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (17)

By: Ge

Part Number: WB44X232

The Broil Element is an OEM part for GE ovens. It provides the necessary heat for broiling by producing high-intensity radiant heat from the top of the oven, allowing for cooking and browning foods.

Causes of a bad broil element can include repeated high-heat exposure, physical damage from cleaning or food spills, and electrical surges.

Symptoms of a bad broil element include:

Inconsistent or no heat during the broiling cycle
Visible signs of damage, such as blisters or breaks in the element
Sparking or unusual noises when the broil function is engaged
Uneven cooking or browning of food

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015

I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo... Read more

$72.95

Compare At:: $87.54
You Save:: $14.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Heating Element

4.9 (15)

By: Ge

Part Number: WB30X20481

The Surface Heating Element is an OEM part for GE ranges. The element is a large 8" plug-in style burner. This element is designed to provide consistent and even heat for cooking on the stovetop. It is typically used for tasks such as boiling, simmering, and frying, ensuring that your cookware heats up efficiently.

You should replace the surface heating element if it becomes faulty. Causes of a bad surface heating element can include wear and tear from regular use, electrical faults, or physical damage. Over time, the element may degrade, affecting its ability to heat properly.

Symptoms of a bad surface heating element include:

Element not heating up
Inconsistent or uneven heating
Sparks or electrical shorts
Visible damage or burning on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Unit would not "heat up" anymore and also found the receptacle contacts were badly burnt and charred Margaret J. • Hanover , PA • September 23, 2014

Replaced defective/worn surface unit and burnt receptacle! Read more

$68.53

Compare At:: $81.55
You Save:: $13.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 Inch Large Surface Element

4.8 (38)

By: Ge

Part Number: WB30X348

The 8-inch Large Surface Element is an OEM replacement part for GE electric ranges. Occupying a full burner space, it provides powerful heating for large pots and pans. Consistent output is important for chef-quality results. Fits those General Electric and Hotpoint ranges using a 2350 watt, hi-rise, no trim ring, 2 wire, screw-in element.

Causes of a bad surface element can include electrical malfunctions, frequent use leading to wear and tear, or physical damage from impacts or spills. Over time, the element may burn out or develop hot spots, leading to uneven heating.

Symptoms of a failing element include:

Heat not radiating out evenly from the entire coil surface
Fluctuating temperatures and inconsistent boiling or searing
Exposed or damaged wiring presenting shock or burn risks
Controls no longer functioning properly to turn the element on/off

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges

NOTE: For the matching 6-inch element order WB30X359. Includes the ceramic terminal blocks, clips, and screws for mounting.

Do-It-Yourself Stories from Customers like You Needed to replace all surface elements drip pans rings and baking element in stove Andy F. • Starkville , MS • May 01, 2016

Ordered new parts and replaced all. Had to slightly modify the wire terminals all four surface elements so that they would fit the ceramic insulators that were shipped with each one. Read more

$56.23

Compare At:: $102.11
You Save:: $45.88

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Samsung part

Dryer Heater Igniter

5.0 (8)

By: Samsung

Part Number: DC47-00022A

The Dryer Heater Igniter is an essential component for maintaining the optimal performance of your dryer. This genuine OEM part is specifically designed for Samsung dryers, ensuring a perfect fit and reliable operation. The Dryer Heater Igniter efficiently ignites the heating element, providing consistent and even heat distribution for thorough drying cycles. Crafted with high-quality materials, this igniter offers durability and long-lasting performance, helping to extend the life of your appliance. Replacing a faulty igniter with this genuine OEM part ensures safe and efficient functionality, reducing the risk of overheating or incomplete drying. Installation is straightforward, allowing you to restore your dryer's performance without the need for professional assistance. By choosing the Dryer Heater Igniter , you benefit from improved drying efficiency and reliability, ensuring your clothes are dried quickly and effectively. Trust this genuine OEM part to enhance the performance of your Samsung dryer and provide a seamless user experience.

Do-It-Yourself Stories from Customers like You Samsung dryer model dv395gtpasu/a1 operation as normal but without heat Khanh T. • Fountain Valley , CA • May 09, 2016

Replaced the following parts but did not fix the problem: -Thermister -Thermal fuse -Radiant sensor -Ignitor -Therm The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working. Read more

$171.70

Compare At:: $204.32
You Save:: $32.62

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Igniter Bake Parts

8-Inch Surface Burner Drip Bowl (Coil Element)

Igniter Glowbar

Range Bake Element Bottom Heater Sheath

Oven Broil Kit

Top Burner Igniter

Surface Heating Element

Oven Broil Element

Unit Broil Asm (Dlx)

Broil Element

Surface Burner Spark Electrode

Oven Burner Ignitor

Oven Igniter

Oven Broil Element

Surface Heating Element

8 Inch Large Surface Element

Dryer Heater Igniter

Appliance Type

Brands