Need Help?
Call or text
Fixes unresponsive buttons, display errors, or failed oven functions. Controls all cooking modes and temperatures. DIY-friendly, 30-45 minute install.
Called an appliance guy, who said the control panel needed to be changed and quoted me $600. Luckily I Googled the model number and found this website. After seeing that several other people had had the same problem and that the membrane was recommended (not the control panel), I took a chance and ordered the part. One of the other posters recommended a Japanese YouTube video which I easily found and watched first. I highly recommend watching the video first. It's not a hard repair but he... Read more
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on. Read more
Dishwasher won't turn on or start? A faulty control board often causes no power, flashing lights, or incomplete cycles. Moderate DIY repair.
After looking for solutions online and watching some short videos, we decided to open the dishwasher up and try to fix it ourselves. We opened it up and found the circuit board had burned out causing a horrible odor. We ordered our new board, popped it in and we now have a working dishwasher. Hooray! Read more
If your dryer won't heat properly or runs continuously without stopping, the timer may need replacement. Common DIY repair, moderate difficulty.
My husband took the old timer out and replace it with the new. Now it worked fine. Being we order the other parts we decided to replace them. Read more
Washer won't advance through cycles or stops mid-cycle? The timer controls wash, rinse, and spin sequences. DIY-friendly repair restores normal operation.
I replaced the timer Read more
Dryer won't start or console unresponsive? This electronic control board manages all dryer functions including cycles, temperature, and sensors.
Tried replacing the thermal fuse with no luck. Replaced the control board now dryer works. Read more
Fix a blank display, unresponsive touchpad, or SE error code on your gas range. This control board restores oven functions in 15-45 minutes with basic tools.
Unplugged the stove. Removed the back of the control panel. Removed and replaced the membrane keyboard and the main PCB. Reassembled the stove and everything was back to normal. The PCB was probably ok but I wanted to be sure and get the stove working as soon as possible so I replaced both parts at the same Read more
The Control Board is an OEM part for Bosch wall ovens. It serves as the main control center for the oven, managing and regulating all the functions, including temperature settings, cooking modes, timers, and the operation of the heating elements.
Causes of a bad Control Board can include electrical surges, wear and tear from prolonged use, exposure to heat, and moisture or grease buildup that can damage electronic components.
Symptoms of a bad Control Board include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Replaced the main control board on a Thermador oven model POD301J/01 after we got an E115 error and the top broiler would come on no matter what setting you put it on and wouldn't turn off and would overheat. Took me about 30 mins total to replace after taking pics to make sure everything went back as it was. So far so good and it's working again! Read more
The Control Panel is an OEM part for LG dishwashers. It is the interface that allows users to select and control various washing cycles and settings on the dishwasher. The control panel includes buttons or a touchpad that sends signals to the dishwasher's main control board, ensuring the correct operation of the appliance.
Causes of a bad control panel can include electrical malfunctions, physical damage to the buttons or touchpad, or wear and tear from frequent use. Moisture intrusion or accidental impacts can also contribute to the failure of the control panel.
Symptoms of a bad Control Panel include:
This OEM LG part is also compatible with Sears/Kenmore.
When I ordered the control board the young lady told me that I had to take the front off the dishwasher. I did exactly as she said and started to put the new control board on. I could not unplug from the old one and finally my son came by and did that. I then put everything back together and turned it on. IT WORKED. Thank you. I should probably tell you that I am a 75 year old woman and if I can do it, anyone can. Read more
Dryer runs but won't heat or won't stop at cycle end? The timer controls heating element power and cycle completion. Moderate DIY repair, 30-45 minutes.
Used ohm meter on all thermostats and element.everything looked good.wasnt getting power to element unless you wiggled timer knob .ive used this website a bunch because it beats everyone else's prices Read more
Fix F11 error codes, blank displays, or non-responsive controls with this electric range electronic control board. Moderate DIY repair in 1-2 hours.
You were right on with your evaluation. I Replaced the board, and we seem to be like new. Thanks Read more
Fix a washer that won't start, has all lights on, or runs erratically. This electronic control board restores proper cycle control. Moderate difficulty.
Replace the Mainboard control and push the start button. Read more
This is a Whirlpool drive motor control board, or MCU, for washing machines. It monitors and controls the speed and direction of the drive motor. If this board fails, the washer likey will not work, and the display may show an error code like F70.Before installing this part, be sure to cut power to the appliance and allow it to drain, cool, and dry completely. The washer will need to be pulled away from any walls to properly access the control panel. After opening the panel, remove any mounting screws or wire harnesses connecting the old drive motor control board and install the new one in its place.This is a genuine OEM part compatible with washers manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product contains no additional parts or hardware.
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU .... Read more
If your dryer won't start, lights blink, or it stops mid-cycle, the control board may have failed. DIY-friendly repair taking about 20 minutes with basic tools.
Downloaded the Frigidaire Service Manual for Electric 5.8 cubic foot dryer from the ApplicanePartsPro.com forum. Used its information to check for error codes. None display. Ran the function test sequence. All the tests OK. Used a mutli-meter to check the circuit to the moisture sensor bars inside the door. Thought maybe the circuit could be open due to a loose plug or broken wire. This could signal the control board that the clothes are dry. This all checked OK. Since the top four... Read more
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher... Read more
Fix a washer that stops mid-cycle or won't advance with this mechanical timer. Controls wash, rinse, and spin sequences. 10-20 minute DIY repair.
After opening the area where the timer was housed, I removed the old timer & replaced it with the new one. The repair was so easy we were back to washing clothes in 10 minutes. Read more