Need Help?
Call
The Broil Element is an OEM replacement part for Whirlpool ranges. It works to radiate intense heat from the top of the oven cavity, allowing for quick and effective broiling of foods placed directly underneath. The broil element relies on protective coatings to withstand high temperatures and insulated filaments to safely conduct electric current without damage. Symptoms of a bad broil element include:
Causes of a bad broil element can be deterioration of protective coatings over long-term use, damage to filaments from wear and tear, or burns/breaks from contact with other oven surfaces. This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replaced it. Read more
Oven not heating or element burned out? This lower bake element restores bottom heat for even baking. Easy 5-minute DIY repair with basic tools.
I found my model number on AppliancePartsPros.com very easily and found the new element and temperature sensor kit. The temperature has always been a little off, so I figured I needed the new sensor. I am glad I also ordered the element. When I took everything apart I discovered that the wire connector had burned off and the element was no good anymore. I had a spare connector in my tool box, so I crimped it on, and put everything back together. Now the oven heats quickly and I believe it is... Read more
Broiler not working or burned out? This broil element radiates intense heat from above to sear and brown foods. Straightforward DIY replacement.
I got a new part and replaced it. Read more
Fix a burner that won't heat with this 8-inch range surface element. Direct replacement for 3-wire cooktop heating coils. Moderate DIY, 30-40 min install.
Ordering the right part is the key. This is the element with 3 wire connectors NOT the usual kind with 2 prongs that slide in. Thank goodness this company carries these elements for old GE built-in stoves. I'm not super handy but replaced two in about 40 min. Make sure you save the old ceramic clamps. The three prongs of the element with connected wires need to fit completely in the ceramic grooves so the two sides can be clamped together. The new element comes with everything you need but... Read more
The Large Haliant Element is an OEM replacement part for GE ranges/cooktops. This haliant burner element is 8 inches in diameter. The element lies underneath the stovetop and will need to be replaced if it stops heating. 8-inch 2100 watt. Includes limiter Causes of a bad halogen element can include cracked or damaged ceramic material, broken support coils, or malfunctioning heating coils. Symptoms of a bad halogen element include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Unplug range. Open oven door to gain access to the cook top lock-down screws, located under the front edge of the cook top. Tip the cook top up and carefully remove it by pulling forward. Set aside in a safe place. Remove old, burned-out, element by removing the single lock tab, located on one of the three mounting posts, then lift up. Leave the wiring attached. Flip the element over and remove the three mounting tabs, making note of their numbered locations. Transfer the mounting tabs to... Read more
Range burner not heating or heating unevenly? This 8-inch surface element restores proper cooking heat. Easy DIY installation in under 15 minutes.
Replace burner and receptacle. The product arrived promptly after order and the receptacle came in a factory Whirlpool bag, indicating it was a genuine Whirlpool part. The burner did not have such identification, but works very good. I've placed 3 orders with these folks for various broken appliances, and each one has worked as advertised and performs like new. Read more
Oven not heating or reaching temperature? This bake heating element distributes even heat for proper baking. DIY-friendly repair with basic tools.
Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more
Oven won't heat or takes too long to preheat? A failed bake element is the most common cause. This lower heating coil restores proper baking temperature.
Replaced bake element to no avail, seeking help with live chat. FYI, order process and delivery time was top notch. Read more
This is a 12-inch radiant surface heating element designed for use on a glass-top electric range or cooktop. It sits beneath the glass surface and radiates heat upward to cook food evenly on the corresponding burner zone. Replace this element if the burner fails to heat, heats unevenly, or does not reach the correct temperature when turned on.
I replaced the large surface element first before examining the switch. In hindsight I probably only need to replace the large surface switch. Once I open the back of the control area of the stove the blacked switch and wire made in obvious that the trouble was in the connection and switch. Luckily, I had a new contact to rewire the wiring as the old was burnt badly. After cutting it out and connecting a new one and replacing the switch the problem was fixed. Read more
Replace a burner that won't heat, only works partially, or stuck on high. This dual-zone radiant surface element fits glass cooktops and restores control.
Burner not heating or heating unevenly? This surface heating element restores even heat. Easy DIY install takes minutes—just plug in and secure.
Put in new ones. No repair necessary. Read more
Oven not heating or baking unevenly? The bake element is likely burned out. This 15-minute DIY fix requires just a screwdriver to restore your oven.
Determined the lower heating element wasn't working. Chatted with appliance parts pros and found compatible part. Quick ship and easy replacement. Probable saved over $100 not having a GE service call. Read more
If your burner won't heat or has stopped working, this 8-inch surface heating element restores cooktop function. Easy plug-in installation in minutes.
Ordered new heating coils for stove Read more
If your cooktop burner won't heat or heats unevenly, the surface element may be faulty. Simple plug-in replacement takes under 10 minutes to install.
Installed the new pans and replaced the coils. My Jennaire looks like new. Only took minutes and made such a difference. Read more
Broil element burned out or not heating? This upper oven heating element restores broiling function. Simple 15-minute DIY fix with basic tools.
Replaced broiler element with new one. We had difficulties in locating the correct element for my oven. Read more
Oven not heating or heating unevenly? This bake element restores proper temperature for consistent cooking. DIY-friendly installation in under an hour.
I ordered an element one day it was there the next day, that was quick. It fit perfectly in place Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.