Jbp78wy1ww Parts

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (177)

By: Ge

Part Number: WB44X173

The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.

Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.

Symptoms of a bad Broil Element include:

The oven not heating up to the set broil temperature.
Uneven cooking or browning of food.
No visible glow from the element during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Oven not heating evenly
Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

$28.23

Compare At:: $61.01
You Save:: $32.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Cerama Bryte Cooktop Cleaner

4.9 (306)

By: Ge

Part Number: PM10X310

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.

Do-It-Yourself Stories from Customers like You Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016

VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more

$14.78

Compare At:: $17.44
You Save:: $2.66

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Door Handle Endcap

4.8 (63)

By: Ge

Part Number: WB07K10043

The Oven Door Handle Endcap is an OEM part for GE ovens. This part serves as the finishing touch on either end of the oven door handle, providing not only a clean and polished look but also a secure connection point for the handle itself.

Signs that it's time to replace an oven door handle endcap include visible damage or cracks, the endcap becoming loose or detached, or difficulty in securing the oven door handle properly.

Symptoms of a bad Oven Door Handle Endcap include:

The oven door handle feels loose or wobbly
Visible damage to the endcap, such as cracks or breaks
The endcap does not securely attach to the oven door or handle
Difficulty in opening or closing the oven door due to a compromised handle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge electric oven door hinge & door handle broke Robert D. • Oceanside , CA • January 03, 2017

REPLACE door hinges and door handle (about 30 minutes) 1. Open the door to the first catch. 2. Lift the latch keepers (stoppers) on the hinge. 3. Lift / pull the door away from the oven. 4. set on a flat surface with inside of door up. 5. Remove three screws on the bottom of the door. 6. Remove two screws on the inside towards of the top of the door (gold in color). These are long wood type screws. 7. carefully lift the inner door from the outer door. (NOTE: there are two metal pieces that the... Read more

$32.95

Compare At:: $43.18
You Save:: $10.23

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Infinite Heat Switch Kit

4.8 (55)

By: Ge

Part Number: WB21X36771

The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.

Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.

Symptoms of a bad Infinite Heat Switch include:

Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015

I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking as it cycles - it should be replaced. I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of... Read more

$49.68

Compare At:: $59.62
You Save:: $9.94

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Radiant Element

4.9 (37)

By: Ge

Part Number: WB30T10099

The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.

Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.

Symptoms of a bad Radiant Element include:

The element not heating up, leading to insufficient cooking temperatures.
Uneven heating, causing inconsistent cooking results.
The cooktop surface not responding or only partially heating, indicating a possible failure in the element's circuit.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Large dual burner Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

$109.46

Compare At:: $142.70
You Save:: $33.24

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Handle

4.9 (18)

By: Ge

Part Number: WB15X10018

The Handle is an OEM part compatible with GE ovens and ranges. It is the component that allows you to open and close the oven door or range oven easily and securely. The handle measures 21 inches in length.

Over time, the handle can become loose, wobbly, or even detach due to repeated use or accidental impact. Causes of a bad handle include excessive force or mishandling, wear and tear on the mounting hardware, or simply aging and deterioration of the materials.

Symptoms of a faulty handle include:

Loose or wobbly handle that feels unstable when operating
Difficulty opening or closing the oven door smoothly
Visible cracks, breaks, or damage to the handle itself
Missing or loose mounting screws or brackets

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge electric oven door hinge & door handle broke Robert D. • Oceanside , CA • January 03, 2017

$31.62

Compare At:: $37.31
You Save:: $5.69

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Light Lens

4.9 (42)

By: Ge

Part Number: WB36X192

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

Diminished light output, making it hard to see inside the oven
Cracks or damage to the lens itself
Discoloration or cloudiness that cannot be cleaned off
The lens becoming loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Sensor Kit

4.9 (12)

By: Ge

Part Number: WB23X5340

The Oven Sensor Kit is an OEM replacement part for GE ranges. It contains critical sensors that monitor the oven's temperature, functions, and safety features during the cooking process. An accurate and fully functioning sensor kit is essential for reliable oven performance.

Causes of a bad oven sensor kit can include failures in individual sensors due to prolonged use and heat exposure over time. Electrical issues affecting communication between sensors and the control board may also require sensor replacement.

Symptoms of a bad oven sensor kit include:

The oven not heating or cooling as expected
Inability to properly select or maintain temperature settings
Error codes or failure messages appearing
Safety features like the door lock not activating

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking

Do-It-Yourself Stories from Customers like You F2 error code Craig P. • Nashville , TN • March 13, 2015

I was able to find the model number on the lower right hand side of the range/oven, a GE True Temp. I Googled it to find parts, and thought I had found the correct sensor, but was very pleased that the ApplianceParts sire suggested I check compatability again before the order. I would have ordered the wrong sensor kit other wise. I DID get the correct one order. It arrived on time. The tricky part was get the old sensor out without having to pull the oven/range combo out form the wall over... Read more

$127.76

Compare At:: $150.76
You Save:: $23.00

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Broiler Pan Kit

5.0 (46)

By: Ge

Part Number: WB48X10056

The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.

Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.

Symptoms of bad broiler pans include:

Grease fires caused by dripping grease contacting the heating element
A burnt or smoky flavor transferring to foods
Difficulty removing baked-on grease and food deposits
Pans that are misshapen or developing small cracks

This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges

Do-It-Yourself Stories from Customers like You None Ralph W. • Brentwoo , NY • July 13, 2014

Fast delivery, great service Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Light Bulb (40W)

4.8 (16)

By: Ge

Part Number: 40A15

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.

Symptoms of a burnt out refrigerator light bulb include:

Dim or no light illuminating inside refrigerator shelves
Shadows and dark spots making it difficult to find items
Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014

I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more

$18.95

Compare At:: $22.36
You Save:: $3.41

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bottom Door Trim (Wht)

4.9 (15)

By: Ge

Part Number: WB07K10250

The Bottom Door Trim is an OEM part for GE ranges. It serves as a finishing touch, providing a seamless transition between the bottom of the oven door and the base or kick plate area.

Causes of a damaged Bottom Door Trim range from impacts during cleaning or moving the range, to general wear and tear over years of use. Exposure to high heat or spills can also contribute to the deterioration of the trim.

Symptoms of a bad Bottom Door Trim can include:

Cracked or broken trim pieces
Missing sections of trim
Loose or misaligned trim
Faded or discolored trim material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models

Do-It-Yourself Stories from Customers like You Rusted bottom door trim on stove Mel B. • Rossford , OH • April 19, 2014

Initially, I took it off, sanded it and painted with appliance touch-up. Still didn't look good so I ordered a replacement part and installed. Read more

$14.95

Compare At:: $17.79
You Save:: $2.84

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Rack

5.0 (14)

By: Ge

Part Number: WB48X5099

The Oven Rack is an OEM part for GE ovens. It is a fundamental component that provides a stable platform for placing baking sheets, pans, and other cookware inside the oven. The oven rack is designed to fit securely into the oven cavity, allowing for efficient heat circulation and even cooking. It measures approximately 23” wide by 16” deep.

Causes of a faulty oven rack can include wear and tear over time, exposure to high temperatures or heavy loads, or damage due to accidental impacts. These factors can result in bent or warped rack wires.

Symptoms of a bad oven rack may include:

Difficulty sliding the rack in and out of the oven
Uneven cooking or browning of food items
Visible damage or deformation of the rack wires

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Range's bake element melted itself Peter K. • Blue Springs , MO • April 24, 2020

Our 25-year-old range's original Oven Bake Element melted itself. When it happened it looked like someone was using an arc welder in the oven. This seemed to be a potential DIY repair, especially after looking at the cost of a new range. So we Googled the oven's model number (GE JBP21GS2WH) and AppliancePartsPros.com was the top search return. (Way to go, SEO!) Clicking on this link brought up a web page of parts specifically for our model number with the parts sorted by popularity. The Oven... Read more

$64.24

Compare At:: $77.09
You Save:: $12.85

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Large Haliant Element

4.9 (29)

By: Ge

Part Number: WB30T10045

The Large Haliant Element is an OEM replacement part for GE ranges/cooktops. This haliant burner element is 8 inches in diameter. The element lies underneath the stovetop and will need to be replaced if it stops heating. 8-inch 2100 watt. Includes limiter

Causes of a bad halogen element can include cracked or damaged ceramic material, broken support coils, or malfunctioning heating coils.

Symptoms of a bad halogen element include:

Element not heating up properly or unexpectedly shutting off
Burned-out coils or melting/warping of the protective, reflective dish

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Non-working haliant element. Duane R. • Fort Myers , FL • March 14, 2014

Unplug range. Open oven door to gain access to the cook top lock-down screws, located under the front edge of the cook top. Tip the cook top up and carefully remove it by pulling forward. Set aside in a safe place. Remove old, burned-out, element by removing the single lock tab, located on one of the three mounting posts, then lift up. Leave the wiring attached. Flip the element over and remove the three mounting tabs, making note of their numbered locations. Transfer the mounting tabs to... Read more

$121.95

Compare At:: $145.61
You Save:: $23.66

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Receptacle Push-In

5.0 (32)

By: Ge

Part Number: WB08T10026

The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.

Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.

Symptoms of a bad receptacle push-in are:

Loose or wobbly electrical plug connection
Exposed wiring or fragile cord positioning
Tripped breakers or recurring electrical issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015

Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more

$6.95

Compare At:: $8.36
You Save:: $1.41

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jbp78wy1ww Parts

Appliance Light Bulb

Oven Broil Element

Cerama Bryte Cooktop Cleaner

Oven Door Handle Endcap

Infinite Heat Switch Kit

Radiant Element

Screws - 12 Pack

Handle

Oven Light Lens

Oven Sensor Kit

Broiler Pan Kit

Light Bulb (40W)

Bottom Door Trim (Wht)

Oven Rack

Large Haliant Element

Receptacle Push-In