Med Small Engine Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107
The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.
Symptoms of a faulty Dryer Door Switch include:
- The dryer failing to start or operate with the door closed
- The dryer continuing to run or heat even when the door is open
- Error codes or warning lights related to the door switch sensor
Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
-
Will not tumble
See more...
Do-It-Yourself Stories from Customers like You
Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021
I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter....
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.
Symptoms of a faulty Large Surface Element Switch include:
- Difficulty in adjusting or maintaining consistent heat settings
- The surface element not heating up or cycling on and off unexpectedly
- Flickering or erratic behavior of the surface element
- Burning smell or visible signs of overheating
Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$34.57
- Compare At:
-
$41.14
- You Save:
-
$6.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149400
The Surface Element Switch is an OEM replacement part for Whirlpool ranges and ovens. This component serves as the control mechanism for the 8-inch surface heating element, allowing you to precisely regulate the temperature or turn the burner on and off.
Symptoms of a faulty surface element switch may include:
- The heating element not turning on or off properly
- Issues with adjusting or maintaining the desired heat level
- Flickering or erratic behavior of the burner
Causes of needing to replace the surface element switch can include normal wear and tear over time, electrical malfunctions, or damage from exposure to high heat or spills.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range and oven models.
For small element switch use- 3149404
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The burner on my electric stove was "running wild" (not controlling temperature correctly) James S. • South Abington Township , PA • June 22, 2014
The fix was to replace the infinite control switch on my Whirlpool range. A simple task.
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Ge part
By: Ge
Part Number: WB24X25013
The Switch Infinite Control is an OEM part for GE ranges. It acts as a critical regulator for the temperature settings on electric dual-element burners, allowing users to adjust the heat level accurately. This component ensures that the electric burners heat up to the desired temperature and maintain it consistently for optimal cooking results.
Symptoms of a bad Switch Infinite Control include:
- Burners not heating to the set temperature
- Inability to adjust the heating level of burners
- Burners heating unevenly or excessively
Causes of a bad switch can include internal component failure due to overheating, wear and tear from frequent use, or electrical faults within the switch mechanism.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dual electric burner. We could not control temperature, suspected the burner switch was bad. Gary L. • St Louis , MI • February 23, 2021
I got online and found AppliancePartsPros.com. I found others had the same problem, and
had replaced the switch, with my model number your rep got me the exact switch
and a video on how to change it. It took approx 15-20 min . was very happy with the
service, will use again in future if needed.
Gary
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318084
The Lid Switch is an OEM part for Whirlpool washing machines that is responsible for detecting whether the washing machine lid is closed before allowing the machine to start or continue a cycle. By preventing the washer from operating with an open lid, this switch helps to avoid potential spills or accidents, making it an essential safety feature. The lid switch is activated by the closing of the machine's lid, engaging the washing cycle only when secure closure is detected.
Symptoms of a failing Lid Switch include:
- The washing machine not starting or completing a cycle
- The washer not spinning or draining
- The appliance operating only when the lid is pressed down manually
Causes of a bad Lid Switch can range from mechanical wear and tear to accidental damage, such as slamming the lid too hard or frequently, which can misalign or damage the switch mechanism. Additionally, corrosion caused by moisture or detergent residue can also impair the switch's function.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Won't start
-
Timer will not advance
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
Our washing machine filled then began washing the wife opened the lid to add one more item and it would no longer wash or spin Chris J. • Lakeland , FL • January 02, 2018
First I checked the circuit breakers and power to the outlet, then next wanted to check the lid switch, but it wasn't where I had found it on older models. I could hear it clicking on and off as I raised and lowered the lid, but it wasn't visible. I drained the tub through a siphon hose to lighten the machine, so I could slide it away from the wall to better see. Couldn't see the switch anywhere and decided it must be hiding in the raised console, but was unsure of how to attack it without...
Read more
More
$34.54
- Compare At:
-
$40.76
- You Save:
-
$6.22
Genuine Ge part
By: Ge
Part Number: WB24T10025
The Infinite Switch (8") is an OEM replacement part for GE stovetops. It is responsible for controlling the heat output of the burner. The switch allows you to adjust the heat level by turning the knob, regulating the amount of power supplied to the burner. A bad infinite switch can be caused by regular wear and tear, electrical issues, or overheating. It can also become damaged if exposed to moisture.
Symptoms of a bad infinite switch include:
- The burner not heating up
- The burner staying on at the highest heat setting
- The burner not turning off or not responding
- Visible signs of damage
Causes of a bad infinite switch can include normal wear and tear over time, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014
I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control.
Read more
More
$34.49
- Compare At:
-
$41.39
- You Save:
-
$6.90
Genuine Ge part
By: Ge
Part Number: WE4M416
The Dryer Push-to-Start Switch is an OEM replacement part for GE dryers. This component is responsible for initiating the drying cycle when pressed, serving as the primary control for starting the dryer's operation.
Symptoms of needing to replace the push-to-start switch include:
- The dryer failing to start or begin the cycle when the switch is pressed
- Intermittent or inconsistent starting issues
- Visible damage or deterioration of the switch itself
Causes of a faulty push-to-start switch can include mechanical wear and tear over time, electrical malfunctions, or physical damage due to impact or mishandling.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017
I was trying to troubleshot a problem I had with my GE dryer not starting. I went to AppliancePartsPros.com because they have excellent DYI videos on how to make repairs. I determined that the problem was in the push start switch. I ordered the switch online and it took 3 days to arrive. It took 5 minutes to replace the switch and the dryer works perfectly.
Read more
More
$23.32
- Compare At:
-
$27.75
- You Save:
-
$4.43
Genuine Ge part
By: Ge
Part Number: WE4M519
The Dryer Rotary Start Switch is an OEM replacement part for GE electric dryers. This switch functions as the manual interface for selecting drying cycles and initiating operation. Reliable start switch function is key for convenient control.
Symptoms of a faulty switch include:
- Difficulty turning or clicking through cycle options
- Dryer failing to start even when a cycle is selected
- Dryer starting unintentionally or without input
- Potential safety concerns if switch malfunctions
Causes of a bad start switch can be normal wear and tear over heavy usage periods. Worn internal components prevent dependable cycling.
This OEM GE replacement is compatible with Hotpoint, RCA and some Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
It wouldn't start i needed a rotary start switch Tange M. • Florissant , MO • June 20, 2014
I watch the video on YouTube. And it went step by step on how to take it off and on
Read more
More
$13.95
- Compare At:
-
$18.72
- You Save:
-
$4.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119326
The Speed Control Plate is an OEM part for Whirlpool stand mixers. This part regulates the speed at which the mixer operates, ensuring that it can accurately adjust to the desired setting for a wide range of mixing tasks.
Over time, the speed control plate can wear out or become damaged due to regular use, leading to issues such as the mixer not maintaining the set speed, operating too fast or too slow, or not adjusting speeds at all.
Symptoms of a bad Speed Control Plate include:
- The mixer fails to change speeds or adjust accurately
- The appliance operates at an incorrect speed regardless of the setting
- The mixer only works at one speed or does not work at all
- Unpredictable speed changes during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My kitchenaid k5 ss had only one speed fast! Alice F. • El Dorado , KS • December 13, 2014
I read a few of your reviews and found that a, "Phase Control Board" may be the problem. It was! Talk about easy to install... It was super easy! I decided to order the, "Speed Control Plate" also as a precaution (Shipping was one price - and it arrived the very next day, Wow! I didn't expect that.) With my screwdriver and good lighting. I fixed it myself! My husband is still in shock. I used forceps to install the, "Speed Control Plate," because I needed something to hold the tension wire - at...
Read more
More
$16.75
- Compare At:
-
$20.10
- You Save:
-
$3.35
Genuine Frigidaire part
By: Frigidaire
Part Number: 297286803
The Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component plays a crucial role in providing the initial torque needed to start and run the compressor motor, ensuring efficient and reliable operation of your refrigerator's cooling system.
Causes of needing to replace the run capacitor can include normal wear and tear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.
Symptoms that may indicate a failing run capacitor include:
- The refrigerator not running or cooling properly
- The compressor failing to start or running intermittently
- Humming or buzzing noises coming from the compressor area
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
21 month old Frigidaire upright freezer died. John P. • Enola , PA • August 02, 2019
Noticed Rolls on the top shelf no longer frozen, though the meat around it still was. Note: This is a good test, keep something that thaws quickly and is not expensive on top shelf, to act as a barometer for your freezer health!
I first found a trip online to advance the defrost timer, as a failed timer is a common issue. I advanced the timer, but nothing happened. I emptied the freezer, then removed the thermostat and tested it. No continuity! With the Freezer continuing to thaw, I...
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Ge part
By: Ge
Part Number: WD21X10519
The Flood Switch Assembly is an OEM part for GE dishwashers that is responsible for detecting water levels in the dishwasher's base, preventing potential flooding by shutting off the water intake if an overflow is detected. This helps in avoiding water damage to your home and ensuring the dishwasher operates normally.
Symptoms of a bad Flood Switch Assembly include:
- The dishwasher not filling with water
- Water not draining properly
- The dishwasher stops during a cycle
Causes of a bad flood switch assembly can vary from debris accumulation affecting the float's movement to electrical issues within the switch mechanism. Over time, wear and tear on the float or switch can lead to failures.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The dishwasher would not fill with water Jeffrey J. • Ramsey , MN • December 02, 2014
Removed the lower rack, removed the lower wash arm, removed the lower coarse filter, removed fine filter ( still no tools require to this point). Removed two 1/4" head screws with nut driver to then remove float switch, unplugged float switch, plugged in new switch, reinstalled filter, etc. This is a 5 minut job!
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10434452
The Dual Element Control Switch is an OEM part for Whirlpool ranges and cooktops. This control switch is designed for models with dual heating elements, allowing you to adjust the size of the heat output on the LF element depending on whether you are using the inner or outer element.
Causes of a bad Dual Element Control Switch can include electrical issues such as short circuits or worn contacts, physical damage to the knob or switch mechanism, or problems with the internal components that regulate power.
Symptoms of a failing Dual Element Control Switch include:
- Inability to change between the inner and outer elements
- Irregular heating or lack of response when adjusting the temperature
- The switch feeling loose or not engaging properly
- Burner not heating even though the switch is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Large front burner stayed on high power. Lou G. • Mansfield , TX • October 12, 2019
Watched the attached video, then followed directions and installed the part ordered.
Read more
More
$77.29
- Compare At:
-
$91.98
- You Save:
-
$14.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149404
The Infinite Switch is an OEM part for Whirlpool ranges and cooktops. This part controls the temperature of the small burner on electric ranges and cooktops by regulating the power supplied to the burner. The infinite switch allows for precise temperature settings, providing the flexibility to cook a wide variety of dishes by adjusting the heat level as needed.
Over time, infinite switches can wear out or malfunction, leading to issues with controlling the burner's temperature.
Symptoms of a bad Infinite Switch include:
- The burner does not heat or heats intermittently
- The burner heats to full power regardless of the setting
- Inability to adjust the burner's temperature accurately
- Physical damage to the switch, such as cracking or melting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$50.23
- Compare At:
-
$59.77
- You Save:
-
$9.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 3949247V
The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.
Symptoms of a bad Washer Lid Switch include:
- The wash cycle will not start even when the lid is closed
- Error codes displayed related to the lid being open
- Inability to advance through cycle selections
- Flashes or other improper lid switch behavior
Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Won't start
-
Will not fill with water
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015
My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40