Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement spring for the flapper between French refrigerator doors. Installs in the lower hinge to close the gap automatically. Needed when broken or missing.
I thought fixing this door would be too difficult/expensive, so I just spent a week manually closing the flap myself each time I closed the frig. Then I googled the model number of the frig just for fun. The first result was AppliancePartsPros.com, I clicked ONE SINGLE TIME and I arrived at this site, with the exact part I needed listed at the top, and a repair tutorial video that played beautifully with one more click. In the span of two total clicks, I saw how to fix the frig, and I saw... Read more
Spring sleeve for French door refrigerators. Installs in the left door to support the automatic mullion flap mechanism. Replace if cracked or missing.
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Hinge for French door refrigerator mullion flap. Replace if cracked, broken, or damaged. Supports smooth door operation and proper seal alignment.
Plastic support bracket that secures the freezer handle to the door. Replace if cracked, broken, or missing to properly mount your handle assembly.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Plastic support bracket that secures the freezer door handle. Replace if cracked, broken, or handle keeps loosening. Installs on bottom freezer drawer.
Followed your instruction from your youTube instructions Read more
Plastic center hinge for French door refrigerators. Installs on the mullion assembly between left and right doors. Replace when cracked, broken, or snapped.
I ordered the French door housing, the new piece has a solid raised curved part that enters the guide, and a new center hinge. I watched both repair videos shown on appliance parts Pro. It looked pretty simple, so I got my 2 screw drivers and unplugged the refrigerator and started. The hardest part was removing the upper and lower hinges. The video didn’t show how he got them loose, after several minutes of frustration I figured out how to release the hinge. The new parts installed really... Read more
Fix freezer ice buildup & fridge not cooling. This temperature sensor regulates cooling cycles. DIY-friendly repair, takes about 45 minutes to install.
Replaced the inside back panel which comes with a new fan. Seems the old fan had stopped working due to ice which burned it out. The drain tube was blocked and ice built up on the bottom plate. Using a basting tube from Walmart and hot water I thawed out the ice in the tube. The basting tube became much like a toilet plunger and cleared the line rapidly. Nothing else worked as fast. I then bought a one foot long piece of thin solid copper wire from Lowes and stripped the insulation off. I... Read more
Replaces broken or missing end cap on refrigerator freezer door handle. Snaps into place to complete handle appearance. Commonly cracks or breaks off.
Ice buildup in freezer or fridge compartment? A faulty defrost thermostat prevents proper defrosting. Moderate DIY repair—test resistance first.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Seals your freezer door to prevent cold air loss and frost buildup. Replace if torn, loose, or ice forms along the door edge. Confirm fit by model number.
After cleaning the seal the freezer continued to build frost so I started searching for a replacement freezer door seal. I found your site had one in stock but decided to contact Appliance Parts Pros by telephone to make sure I would order the correct seal. The employee was very polite and confirmed they had the seal in stock for my Samsung refrigerator. I ordered the seal and exactly two days later it was at my front door. I also need to mention that Appliance Parts Pros had the best price.... Read more
Securely houses your refrigerator's water filter for clean, purified water. Replace if leaking after filter changes or cracked from wear. Confirm fit by model.
After looking online and discovering that others who had used a knockoff brand filter to "save money" had the same problem, I concluded the only solution was to replace the filter housing. Found the one I needed on AppliancePartsPros.com. Most important to me was the video explaining how to replace the filter housing - it made the task a snap to complete. The price was also competitive with other sources. Shipping was half that charged by Samsung. Not only was it cheaper, but it was also super... Read more
Plastic end cap that covers the handle assembly on your refrigerator door. Replace when cracked, broken, or missing to restore a finished look.
We had a hard time finding a tutorial that showed how to replace the part of the handle that broke. After several attempts to fix on our own we gave up. A few weeks later a friend came to our house and we were discussing the fix for the handle and She helped me to fix the handle just buy trying a new way to remove the old broken part. It took us several tries but with her help I was able to fix the door handle and remove the broken part. I really wish your site had a tutorial for this... Read more
Plastic end cap for refrigerator freezer door handles. Replaces cracked, broken, or missing caps. Snaps onto handle ends to restore appearance.
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more