Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Tfx24fg Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Appliance Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

  • Dimming or flickering light
  • Complete lack of illumination inside the appliance
  • Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out   Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

More
$17.76
Compare At:
$20.96
You Save:
$3.20

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Union Connector
Genuine Ge part
By: Ge
Part Number: WR02X11330

The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure. 

Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.

Symptoms of a bad Refrigerator Union Connector include:

  • Water leaks at or near the connector area 
  • Inconsistent or no water flow to the ice maker/dispenser
  • Fluctuations in water pressure to the fridge
  • Water damage to surrounding kitchen areas from leaks

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water leaking from under/behind fridge (two sources) three problems a comedy of errors   Joanne R. • Brookfield , WI • November 09, 2015

We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more

More
$6.53
Compare At:
$9.03
You Save:
$2.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dual Water Inlet Valve Kit
Genuine Ge part
By: Ge
Part Number: WR57X10051

The Dual Water Inlet Valve Kit is an OEM part for GE refrigerators. It controls the flow of water to both the ice maker and the water dispenser. This dual-function valve ensures that your refrigerator can produce ice and dispense water efficiently. The valve operates by opening and closing in response to signals from the refrigerator, allowing water to flow into the ice maker or water dispenser when needed. 

The dual water inlet valve may wear out over time, especially in hard water areas, leading to issues like no ice production, malfunctioning water dispenser, or leaks.

Symptoms of a bad Dual Water Inlet Valve Kit include:

  • No water being dispensed
  • The ice maker not producing any ice
  • A slow or irregular flow of water from the dispenser
  • Water leaking from the valve

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Not dispensing water
  • Leaking
  • Ice maker not making ice
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You Ice dispenser small leak from inlet line causing growing frozen water buildup in area around ice maker   Robert T. • Fountain Valley , CA • October 08, 2022

To verify if you have a bad valve in the first place read on... I first pulled out the ice maker to remove all the frozen water including the inlet section which was a huge solid waterfall of ice. While it was out completely disconnected I cleaned/chipped out the freezer section ice puddle. I also completely melted the ice cubes and ice puddles off the ice maker at the fill bucket end in the sink with running water careful to not get water near the power cord area. I then put a tall plastic cup... Read more

More
$51.95
Compare At:
$64.71
You Save:
$12.76

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Light Switch
Genuine Ge part
By: Ge
Part Number: WR23X37285

The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.

A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.

Symptoms of a bad light switch include:

  • Interior light not turning on when the door is opened
  • Light staying on even when the door is closed
  • Flickering or inconsistent light operation
  • Difficulty pressing or releasing the switch

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Refrigerator light switch broken.   W W. • Bettendorf , IA • April 20, 2020

I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more

More
$19.03
Compare At:
$20.93
You Save:
$1.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Light Socket
Genuine Ge part
By: Ge
Part Number: WR2X9391

The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.

You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.

Symptoms of a bad light socket include:

  • The refrigerator light not turning on when the door is opened
  • Flickering or intermittent light operation
  • Visible damage or corrosion on the socket
  • The light bulb not fitting securely or falling out

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You Our light was flickering and didn't stop with a new bulb   Dianne F. • Hampton , VA • February 14, 2015

I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house. Read more

More
$10.95
Compare At:
$12.92
You Save:
$1.97

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Cam Riser
Genuine Ge part
By: Ge
Part Number: WR2X4901

The Cam Riser is an OEM part for GE refrigerators. It plays a crucial role in the door mechanism, helping to lift and align the door as it opens and closes. This ensures the door operates smoothly and maintains a proper seal, which is essential for the efficient functioning of the refrigerator.

Over time, the cam riser can wear out or become damaged. Causes of a bad cam riser can include frequent use, physical damage from heavy door loads, or general wear and tear of the plastic components.

Symptoms of a bad Cam Riser include:

  • Difficulty in opening or closing the refrigerator door
  • The door not staying aligned or sealing properly
  • Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Door sweating
  • Door won't open or close
See more...
Do-It-Yourself Stories from Customers like You Refrigerator door was binding as it closed; would not close on its own   John H. • Baldwinsville , NY • August 09, 2014

I determined that the cam riser had broken into two pieces. Finding the part was easy on the diagram on the website. It arrived less than 24 hours after it was ordered. Top hinge was removed and the door was placed on a set of horses. One bolt was removed from the bottom of the door, the pieces of the broken cam riser were removed and the new one installed. Door was replaced and top hinge rebolted. The door was off for about 5 minutes. I was very pleased with the service of Appliance Parts... Read more

More
$12.95
Compare At:
$25.40
You Save:
$12.45

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Bucket And Auger Assembly
Genuine Ge part
By: Ge
Part Number: WR17X4312

This OEM Replacement Part is an ice container assembly for GE side-by-side refrigerators from 1998 models and newer with 24 to 27 cubic feet capacity. The assembly includes a 12 3/8” wide x 12 3/8” long x 14 5/8” tall ice bucket with an integrated auger to rotate and move ice into the dispenser chute. The auger within the assembly helps move the ice cubes forward, enabling easy access and dispensing.

Causes of a bad assembly can include wear and tear over time, damage from frequent use or mishandling, and issues with the auger motor or blades that prevent proper ice movement.

Symptoms of a bad Ice Bucket and Auger Assembly include:

  • Ice not dispensing properly
  • The auger not turning or making unusual noises
  • Cracks or damage to the ice bucket
  • Ice jams or clogs in the dispenser chute

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Rusty ice auger   Daniel S. • Barrington , IL • March 28, 2016

Screwdriver Read more

More
$215.43
Compare At:
$256.36
You Save:
$40.93

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Kit Srv Solenoid Cube
Genuine Ge part
By: Ge
Part Number: WR62X23154

The Solenoid Valve Kit is an OEM part for GE refrigerators. This kit includes the solenoid valve, which is responsible for regulating the flow of refrigerant in the cooling system.

Causes of a bad solenoid valve kit include electrical malfunctions, physical damage, refrigerant leaks, or general wear and tear over time.

Symptoms of a faulty solenoid valve kit:

  • Refrigerator not cooling properly or not maintaining consistent temperatures
  • Compressor running constantly or cycling too frequently
  • Frost buildup or ice accumulation in the freezer compartment

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

Do-It-Yourself Stories from Customers like You Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure   Damon B. • Tumwater , WA • December 19, 2015

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

More
$99.95
Compare At:
$118.94
You Save:
$18.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Condenser Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X187

The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.

You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.

Symptoms of a bad condenser fan motor include:

  • The refrigerator not cooling properly
  • Unusual noises coming from the back of the refrigerator
  • The compressor running hot or cycling on and off frequently
  • The condenser coils feeling excessively hot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Freezer section too warm
  • Noisy
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two   Robert P. • King , NC • August 11, 2015

I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of... Read more

More
$226.48
Compare At:
$269.51
You Save:
$43.03

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Evaporator Fan Blade
Genuine Ge part
By: Ge
Part Number: WR60X114

The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.

Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.

Symptoms include: 

  • Abnormal sounds like knocking or clunking from inside the walls  
  • cold spots developing in certain freezer areas
  • Higher power bills from inefficient temperature regulation
  • Frost or ice patches forming on evaporator coils

This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Broken fan blade   Thomas H. • West Blocton , AL • April 21, 2014

I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the... Read more

More
$17.95
Compare At:
$24.40
You Save:
$6.45

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Maker Water Line
Genuine Ge part
By: Ge
Part Number: WR17X11349

The Ice Maker Water Line is an OEM replacement part for GE refrigerators. It is an important supply line that delivers water from the main water source to the icemaker component. The water line allows water to flow smoothly, facilitating the icemaking process.  

Causes of a bad water line can include cracks or punctures from impact or bending, mineral deposits and corrosion building up inside the line restricting flow, or improper connection fittings causing leakage.

Symptoms of a bad ice maker water line include:

  • Irregular or insufficient ice production  
  • No water delivery to the icemaker despite activation
  • Noticeable leaks or drips near the water line attachment points
  • Strange knocking or hammering sounds are heard when the icemaker is running

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water valve was leaking and return water line was leaking   Ivan D. • Hialeah , FL • May 22, 2015

Fridge is 14 years old, ordered the water valve assembly and hose. Removed and replaced both Read more

More
$8.95
Compare At:
$10.56
You Save:
$1.61

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Maker Fill Tube Grommet
Genuine Ge part
By: Ge
Part Number: WR2X8474

The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.

Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.  

Symptoms of a bad ice maker fill tube grommet include:

  • Water leaks around the ice maker fill tube area
  • Ice maker not producing ice properly
  • Visible cracks or deformation in the grommet
  • Water pooling inside or around the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
  • Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor   Terry C. • Durham , NC • February 16, 2019

Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more

More
$32.95
Compare At:
$38.88
You Save:
$5.93

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Defrost Thermostat
Genuine Ge part
By: Ge
Part Number: WR50X55

Open - 55, close - 35

This part fixes the following symptoms
  • Freezer not defrosting
  • Freezer section too warm
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Freezer iced up behind panel refrigerator not cooling   Lisa S. • Camanche , IA • October 08, 2016

Ordered a ge thermostat part . Took everything out of freezer , unscrewed panel and took the plate out. Used a hair dryer to defrost ice. Took out old part and installed new part. Everything is working just fine!!! Used a meter to test old/bad part and indeed it was dead. Read more

More
$8.71
Compare At:
$30.42
You Save:
$21.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Armature Kit (Dispenser Solenoid)
Genuine Ge part
By: Ge
Part Number: WR62X26536

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

  • Converts the solenoid's electrical action into mechanical movement for the dispenser ice chute door
  • Helps maintain a proper seal to limit frost and moisture around the dispenser
  • Typical symptoms: ice won't dispense; chute door won't open/close; frost/ice buildup at the chute; loud buzzing or clicking from the dispenser area
  • Wear or sticking of the armature/spring can hinder movement and affect dispenser operation
What's included: 1 armature kit Installation notes:
  • Unplug the refrigerator and shut off water to the dispenser before servicing
  • Access the dispenser mechanism in the door; remove trim/control panel per your model's service information
  • Note the orientation of the armature, spring, and linkage; transfer components one-for-one to the new kit and secure hardware
  • Verify the solenoid plunger moves freely, reassemble, restore power, and test dispenser operation

Do-It-Yourself Stories from Customers like You Water was overflowing out of the ice maker during fill process and freezing into a block of ice!   Steven B. • Arlington , TX • March 17, 2015

Replaced the water supply valve...boom! Read more

More
$52.73
Compare At:
$63.28
You Save:
$10.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Defrost Timer (Mechanical)
Genuine Ge part
By: Ge
Part Number: WR9X482

This mechanical defrost timer controls the refrigerator's automatic defrost cycle, clearing frost from the evaporator and helping maintain stable temperatures. Replacing a faulty timer restores regular defrost intervals to prevent frost buildup and inconsistent cooling.

  • Cycles the system between cooling and defrost at set intervals to remove frost from the evaporator coils
  • Heavy frost on the freezer back wall or evaporator cover may indicate a failed timer
  • Fresh food section warming while the freezer seems cold, or unit stuck in defrost with no cooling
  • Compressor runs continuously or never restarts; timer does not advance as expected
What's included: 1 defrost timer Install notes:
  • Disconnect power before servicing to avoid electrical shock
  • Access location varies by model; commonly in the control housing, behind the kick plate, or at the rear near the compressor
  • Photograph or label wiring and transfer wires one at a time to the matching terminals
  • Mount securely, restore power, and confirm normal cooling/defrost operation

Do-It-Yourself Stories from Customers like You Ge refrigerator was not cooling as normal   Richard W. • Washington , IL • September 30, 2014

This unit has a recurring problem with the defrost timer. after the first 10 years the original part gave up. we had it replaced and (as normal for me i watched very closely) . after 2 years the same trouble started again. the defrost cycle would run to long. so i replaced the same part and solved the trouble again. so now about every 2 years this part wears out again and i order it and replace it. this has gone on for 20 years now and this unit is still going strong after serving us for 29... Read more

More
$86.29
Compare At:
$102.69
You Save:
$16.40

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Condenser Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X177

CW, 2w, 2 1/4" spade terminals

This part fixes the following symptoms
  • Freezer section too warm
  • Fridge too warm
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You I had a noisy condenser fan motor   Robert Z. • Brooklyn , NY • March 12, 2014

I removed the lower back panel,I disconnected the two wire plug and removed three mounting screws and removed the motor.Then I removed the threaded fan nut and installed the fan on the new motor.Installed the three mounting screw to the bracket and reinstalled the plug.Replaced the lower panel,runs like new Read more

More
$160.56
Compare At:
$191.07
You Save:
$30.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store