Need Help?
Call
Fix a burner stuck on high or an indicator light that won't turn off. This infinite switch controls heat settings on electric range burners. DIY-friendly repair.
1. Went online where I watched video about heat control for this Maytag. I then found AppliancePartsPros using Google. I ordered the part and In three days the part arrived. I installed the part and now the problem has been corrected. Read more
Burner stuck on high or won't heat? This triple burner switch restores proper temperature control. Many DIYers report a 5-minute fix for this issue.
I replaced the energy regulator. Read more
Fix burners stuck on high or not responding to temperature adjustments. This range infinite switch restores precise heat control. DIY-friendly repair.
After removing the top rear access panel, I took as-built photographs of the two components to be replaced showing all wires, connectors and screws! The Energy Regulator for the front left burner was replaced first, noting the orientation before pulling off the knob, and removing the retaining screws. I used long nose pliers to gently remove one lead at a time and reconnect to the new regulator. Checked orientation against the photo, reinstalled regulator and knob. Main PCB Assembly was... Read more
Burner stuck on high heat or won't adjust temperature? This dual surface element switch restores precise heat control. DIY repair in about 30 minutes.
I ordered the 2 energy switches from Appliance Parts Pros with the model number. After receiving parts I started. 1st disconnected the range cord. Remove the control panel at the front. Then one switch at a time removed connection & reconnect to the new switch one by one. Then removed knob & old switch. Secured the new switch & knob to panel. Did the same to the other switch. Secured panel & reconnect. Tested radiant cook tops at different settings & both front heated up. Took approx. 30... Read more
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year... Read more
Fix burners that won't turn off, stay on high, or turn on by themselves. This surface element switch restores safe temperature control. 15-minute DIY fix.
We sent an email to AppliancePartsPros.com asking for their help in fixing our range. We gave them the model number (NE58F9500SS) of our Samsung Electric Range and told them about the faulty/dangerous two dual burners. We hated to get close to the range because the burners would turn on if you barely brushed by the range or if you would reach across it and accidentally touch the burner knobs all of a sudden you would feel heat or just see the light indicating the burner was on. We were... Read more
The Refrigerator Door Interlock Switch is essential for maintaining the proper operation of your refrigerator. This genuine OEM part ensures that your refrigerator doors close securely, allowing the appliance to maintain the correct temperature and efficiency. By accurately detecting whether the door is open or closed, the switch helps prevent energy loss and ensures that your food stays fresh longer. Designed specifically for Samsung refrigerators, this interlock switch offers a reliable and precise fit, making it a perfect replacement for any faulty or worn-out switches. Installing this genuine OEM part is straightforward, helping you restore your refrigeratorGÇÖs functionality quickly and easily. With the Refrigerator Door Interlock Switch , you can trust that your Samsung refrigerator will operate smoothly, providing you with peace of mind and a consistent cooling performance. Upgrade your appliance with this dependable component and enjoy the benefits of a well-functioning refrigerator.
Perfect, everything works now Read more
Burner won't turn off or only heats on high? This infinite switch controls heat settings for your electric range's surface element. DIY repair.
I used your chat and found out the year my stove was made. He also told me what part to order as one of the burners had stopped heating up. We watched the video on how to install it. My friend installed it and my stove burner now works. Read more
The Microwave Door Switch is essential for maintaining the safety and functionality of your Samsung microwave. This genuine OEM part is specifically designed to replace faulty door switches, ensuring your appliance operates correctly. With its precise engineering, the Microwave Door Switch reliably detects when the microwave door is closed, preventing the unit from running when open. This feature not only enhances safety but also protects your microwave from potential damage. Compatible with a wide range of Samsung microwave models, this switch offers a perfect fit and seamless integration. Installing the Microwave Door Switch is straightforward, allowing you to quickly restore your microwaveGÇÖs performance without professional assistance. Using a genuine OEM part guarantees the quality and durability you expect from Samsung, providing long-lasting reliability. Whether your microwave door switch is unresponsive or fails to engage, the Microwave Door Switch delivers a dependable solution to keep your kitchen appliance functioning smoothly. Trust in this high-quality replacement part to maintain the efficiency and safety of your microwave.
Checked the three door switches; used ohm meter to see if there was resistance or if a switch was bad. 2 out of 3 switches showed resistance with the ohm meter. The last one tested (of course the last one) NO (normally open) did not show resistance; I.e. the ohm meter reading did not change when the switch was depressed. Appliance parts pros was the only company that had the same model number I was looking for (SZW-V16-FD-63). I ordered the relay switch, 2 days later it arrived (regular... Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Fix a microwave that runs but won't heat or won't start when door closes. This door switch is a common fix—most DIYers replace it in 15 minutes.
Washer overfilling or not filling properly? The water level pressure switch controls fill cycles. Easy 15-minute DIY repair with our video guide.
This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need. Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub. Read more
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened or closed. By ensuring the door is properly sealed, it helps regulate the internal temperature, keeping your food fresh and your appliance running efficiently. The Refrigerator Door Switch is compatible with a wide range of Samsung refrigerator models, making it a versatile choice for your repair needs. Installing this switch is straightforward, allowing you to quickly restore your refrigerator's functionality without hassle. Whether your current switch is malfunctioning, causing the door light to stay on, or affecting the cooling performance, the Refrigerator Door Switch provides a dependable solution. Trust in this genuine OEM part to deliver consistent performance and extend the lifespan of your refrigerator, ensuring a reliable and efficient kitchen appliance for years to come.
Replaced the reed switch Read more
The Refrigerator Door Switch ensures your Samsung refrigerator operates smoothly by accurately detecting when the door is opened or closed. This genuine OEM part is specifically designed for Samsung refrigerator models, providing a reliable and secure fit. With the door switch functioning correctly, your refrigerator maintains optimal cooling and energy efficiency, preventing issues such as improper temperature control or excessive energy usage. Installing this switch is straightforward, allowing you to quickly restore your applianceGÇÖs functionality without hassle. By choosing this genuine OEM part, you benefit from guaranteed quality and compatibility, ensuring your refrigerator continues to keep your food fresh and organized. Enhance your refrigeratorGÇÖs performance and extend its lifespan with the dependable Refrigerator Door Switch .
Ordered the Door Switch. Arrived the next day. It took less than 5 minutes to install the new switch. The beeping stopped immediately, light worked and temperature gauge showed 34 degrees. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.