Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Replaced the pump drain assembly Read more
Replacement silverware basket for dishwashers. Holds utensils and flatware securely during wash cycles. Needed when original basket is cracked or broken.
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
Complete lower rack assembly for dishwashers. Replace your cracked, rusted, or broken lower rack. Includes wheels, tines, and mounting hardware pre-installed.
Purchased replacement rack with wheels that were better equipped. This rack is way better than the original that was falling apart. The wheels came off and the prongs broke. This replacement part seems to be constructed well. Read more
Dishwasher tub gasket creates a watertight seal between the tub and door. Replace if you notice water leaking or steam escaping. Confirm fit by model.
All parts arrived in one box - I purchased the tub gasket, lower door gasket and lower door seal. My existing parts were visibly pretty worn out, dishwasher is 12 years old (maybe should have just bought anew one?). Tub gasket was pretty easy, it took me a while to make sure it was even all the way around, after attest run and the subsequent drying heat it fits nicely. Lower door seal went as video, all good, my other one was destroyed from the heat cycles. Could not get the lower door seal... Read more
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link... Read more
Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.
Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference: 1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when... Read more
Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.
This was very simple. Thgey just popped back into place asnd the cap screws in. Read more
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes. Read more
Upper dishrack roller kit with 4 nylon rollers and 4 axles. Replace broken, cracked, or worn rollers that prevent smooth rack gliding in your dishwasher.
Removed and cleaned all inside components of dishwasher. Replaced the sump inlet and fine filter. I decided to complete the repair myself when my appliance repairman did not want to help me. The videos from Appliance Parts Pro are AMAZING!!!! Gave me the confidence to do the repair myself (had to fully uninstall the machine and flip it over). THANK YOU!!! Read more
Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!! Read more
Traps food particles during wash cycles to prevent recirculation and ensure spotless dishes. Replace if clogged or damaged. Confirm fit with your model.
My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided... Read more
Dishes coming out dirty or spotty? A clogged sump filter lets food particles recirculate. This filter traps debris for cleaner dishes. DIY install.
Dishwasher leaking from underneath? A cracked pump connector causes water pooling. Requires dishwasher removal; typically 1-hour repair once accessed.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
Center wash arm assembly for dishwashers. Mounts on the center rack area to spray water during wash cycles. Replace if holes are clogged or arm won't rotate.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
The Sump is an OEM replacement part specific to GE-brand dishwashers. Located at the bottom of the wash chamber, the sump collects dirty water from each wash cycle.
Causes of a bad sump can include cracks that leak water or mineral buildup clogging drain components over extended use. Improper drainage prevents the machine from functioning as designed.
Symptoms of an issue with the sump include:
This part is also compatible with Hotpoint, RCA, and some Kenmore models.