Need Help?
Call
Protective cover for your range control panel with button markings. Replace if cracked, faded, or mounting tabs are broken. Installs over the clock assembly.
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more
Replacement control panel faceplate overlay for ovens. Adhesive-backed sticker covers worn, bubbled, cracked, or peeling touchpad surfaces. Easy install.
This repair doesn't require too much thinking, been a sticker you just have to take put the old one and stick the new one. Read more
Protective cover for your dishwasher control panel with printed cycle graphics. Replace if cracked, faded, or damaged to restore appearance and protect buttons.
Control panel overlay for electric and gas ranges. Labels buttons and controls on the interface. Replace if cracked, peeling, faded, or worn out.
Unplugged stove. Removed six 1/4 inch socket head screws from back panel. Removed back panel. Removed plug on the back of the OCB. Removed OCB. Used Philips screwdriver to remove four mounting screws (and cracked pieces of the mounting holes). If you can get to this point, installing the new OCB is pretty self explanatory. Read more
The Dishwasher Interface Cover is an OEM part for GE dishwashers. It covers and protects the control panel and touchpad of the dishwasher, ensuring that the electronic components are shielded from moisture and physical damage.
Over time, the interface cover can become damaged or worn out due to regular use, exposure to water and cleaning agents, or accidental impacts. A compromised cover can affect the usability of the control panel and potentially lead to malfunctions.
Symptoms of a bad Dishwasher Interface Cover include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Had to remove the door from the main body of the dishwasher and then take the outer door apart from the inner door. Find a good video that showed how to do this but it was not exactly like the model of GE dishwasher that I have. Once you know how to remove the panel it went fairly quick. But in removing the inner door I broke the one end of Attach Strip Rh so I order a new one plus in taking the Graphics Asm apart to get to the UI board the small tab that holds everything together broke off. So... Read more
The range touch pad membrane switch is the flat, flexible panel on the oven or range control face that registers your finger presses and sends commands to the control board to set temperatures, timers, and cooking modes. It sits directly beneath the printed faceplate you see and touch every day. Replace it when certain buttons no longer respond, the oven ignores specific inputs, or keys register presses on their own without being touched.
Ordered a Pcb board and membrane switch it fixed the problem Read more
The Overlay is an OEM part for Frigidaire ranges. It is the control panel's interface layer, displaying the various functions and settings available for the range. This component is crucial for selecting and controlling the appliance's operations, ensuring user-friendly interaction with the cooking settings.
Common causes of a bad overlay include regular wear and tear, exposure to heat, or accidental damage.
Symptoms of a bad overlay include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more
Replacement overlay for range touch pad control panel. Installs over the control board buttons. Replace if cracked, peeling, worn, or labels are faded or illegible.
Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more
Houses the digital interface for your dishwasher. Installs on the front door. Replace if buttons are unresponsive, cracked, or display is damaged.
Replaced counsel Read more
Decorative adhesive faceplate for oven control panels. Replace if cracked, peeling, or damaged. Peel-and-stick installation covers button board.
I ordered the three parts listed and now my oven is beautiful, functional and like new again. I first had to figure out that the original parts are no longer available and had to perform an oven upgrade. Obviously the original design was flawed and the new design works perfectly and looks great! The whole repair cost was about $328 with shipping included. The parts were here in just a few days, about 2 to 4 days (some in two days, one in 4 days). Much cheaper and easier than replacing the... Read more
Adhesive overlay that covers and labels the control board buttons on your range. Replace when faded, cracked, peeling, or damaged from heat exposure.
Purchased a new over control board and overlay. Installed in five minutes, and everything works great now. Shipping was super fast, and was here within two days. Read more
The control panel on your dishwasher's door houses the cycle selection buttons and indicator lights. Replace if cracked, worn, faded, or missing.
Removed torx screws attaching stainless liner to outer stainless door. Lift off inner door and carefully separate the electronic components from where they snap into the control panel. Relocate electronic components to the new control panel. Reattach the inner liner with the torx screws. It is helpful to have an extra set of hands to hold the control panel while making the electronics swap to avoid pulling on the wiring harness. For door balance kit I just followed the video, straight forward. Read more
Black touch pad overlay for range control panel. Replaces cracked, worn, or peeling overlays with faded labels. Installs directly over control board.
After checking all connections to ensure power was getting to element. I ordered new control board and replaced it myself. Saved about $100.00 on a service call for someone to come out and replace it Read more
Decorative overlay that covers your range control panel. Replace if cracked, peeling, worn, or warped from regular use. Protects controls and provides clear labels.
The glue behind the keypad loosened and the keypad slowly began slipping down out of place over several months. Finally, because of the movement, it warped which resulted in one of the keys being stuck. That is what gave the F12 error code. The fix was easy. I removed the control panel and then peeled off the keypad. The keypad itself then has two layers (1), the flexible circuit panel, and (2) the outward facing display. I separated the display from the circuit panel and put the new one... Read more
Touch pad overlay for ranges and ovens. Covers the control board with buttons and display panel. Replace if cracked, peeling, faded, or worn out.
Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more
The Oven Overlay is an OEM replacement part for GE ovens. This overlay is essentially the interface between you and your oven's control board. It features buttons and symbols that allow you to set temperatures, cooking modes, and timers. The overlay is designed to fit directly over the control board, providing a user-friendly interface for your appliance. Causes for a malfunctioning Oven Overlay can include wear and tear from frequent use, damage from cleaning solutions or spills, or issues with the adhesive that keeps it attached to the control board. Symptoms of a bad Oven Overlay include:
My wife put the faceplate on the oven control while I accessed the display by pulling the oven out, unplugged it, and removed the rear cover. Only three nut head screws held the upper back panel. 4 nut screws hold the display onto the oven, they were easily removed. My wife took a couple photos of the rear wiring to ensure we plugged the new oven control in properly (there are a fair number of wires but they are color coded in most cases). Turns out we didn't need the photo. As we pulled a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.