Kehc379jss04 Parts

• Oven is too hot
• Oven not heating evenly
• Little to no heat when baking
• Won't start

I have a Whirlpool RBS245PDQ12 wall mount oven. Gathering information from AppliancePartsPros.com resulted in two possibilities: The Thermal Switch or the Control Panel. Talking with Appliance Parts Pros led to testing the Oven Temperature Sensor. It's supposed to test at 1080 Ohms at 70 degrees Fahrenheit. Mine tested at 960 Ohms so I knew it was bad... I found the service manual on the top of the Oven on the left behind the control panel. It has values for testing (Ohms of resistance)... Read more

• Door won't close

Removed the Microwave from the wall, then had to almost completely disassemble the sheet metal surrounding the microwave unit itself. Lots of screws and wires to work around. Takes 2 people to remove the microwave and set it on a stand outside of the wall unit. Once you get to the light bulb, the replacement is easy, just very challenging to get to the light bulb. Read more

• Door won't close

Ordered the correct parts, which arrived in 2 days. Took a couple of hours as this sucker is a huge pain, but some offered tips did help. Second time these have broken on this oven.... Read more

The most difficult part was figuring out how to take the door off as the manual instructions were not clear. Thank you, YouTube for your help. This door doesn't have the more modern release latches. You open the door all the way and stick Allen wrenches into the holes that appear by the joint of the latch. When you close the door to 3/4 or 7/8 closed, the latches are released from the unit and by holding the sides of the door, you pull it out. The whole replacement would take around an hour,... Read more

• Won't start
• Element will not heat
• Little to no heat when baking

This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning. I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the... Read more

This was a very easy replacement of the broken glass turntable. What stood out most for me on this was the great experience I had with ApplicancePartsPros.com. I rarely, if ever, write reviews but this experience deserves notice. I found a couple other sites that had a slightly lower price, but AppliancePartsPros.com made it easier for me to verify that I was ordering the right part. On checkout, I selected standard shipping but the part arrived the next day. It was very well packaged (glass... Read more

Removed the Microwave from the wall, then had to almost completely disassemble the sheet metal surrounding the microwave unit itself. Lots of screws and wires to work around. Takes 2 people to remove the microwave and set it on a stand outside of the wall unit. Once you get to the light bulb, the replacement is easy, just very challenging to get to the light bulb. Read more

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

Touch up paint Read more

Replaced It With New One Read more

I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more

Replaced oven sensor. The upper oven's broil element was badly deformed, and although it had nothing to do with the initial problem I chose to replace it at the same time. Read more

Ordered the new fan (blower) from AppliancePartsPros. It arrived 3 days later. Pulled the wall oven out of the wall, removed the sheet metal back and removed the noisy fan. Installed the new fan, reinstalled the sheet metal back, shoved it back into it's place, turned the power back on and viola!, much quieter. Read more

• Door won't close

Turned power off. Unscrewed the two vertical trim pieces and the bottom trim piece(stainless). Slid microwave out a few inches. Unscrewed the two screws on the inside of the door toward the top that are recessed in the black plastic. (Besure to hold the door assembly together while doing this so you don't accidently drop the glass door). This exposed the bottom two springs. Usually one has a paint mark on the end to tell them apart. Replaced and put back together. Read more

One would think replacement appliance light bulbs would be a staple In Service departments of appliance stores, not so. I decided to travel to several local parts and service departments to pick up six of the little bulbs. Guess what? no one had them in stock! Time, energy spent - mission NOT accomplished. Once again, I turned to AppliancePartsPro.com. Et voila! They bulbs were in stock AND arrived the next day! YEA! Fast, simple service. Instant Success! Who could ask for anything more? Read more

We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting... Read more