Wfr2460c/01 Parts

The Door Seal, Light Gray is an OEM part for Bosch washing machines. This part ensures a water-tight seal between the door and the machine's body. This part prevents water leaks during the washing cycle, thereby protecting your floors from damage and ensuring that the washing process is both efficient and safe.  

Causes for issues with the door seal often involve regular wear and tear from use, exposure to harsh cleaning chemicals that can degrade the rubber, or physical damage from loading and unloading clothes.

Symptoms of a malfunctioning Door Seal include:

• Visible wear, tears, or cracks in the seal
• Water leaking from the front of the washing machine during operation
• A buildup of mold or mildew on the seal, contributing to bad odors

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Fastening Ring is an OEM part for Bosch front load washers. It secures the door boot seal to the front panel of the washer, ensuring a tight and leak-free connection. This ring is essential for maintaining the washer's seal during operation, preventing water from escaping the drum.

Causes of a bad fastening ring can include normal wear and tear, rust or corrosion, and damage from over-tightening or mishandling during maintenance.

Symptoms of a bad fastening ring include:

• Water leaking from the door area
• The door boot seal becoming loose or detached
• Visible damage or deformation of the ring

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This door seal holding spring is the wire clamp that secures the washer's door boot to the front opening, keeping the seal seated to help prevent leaks and maintain a proper fit.

• Holds the door seal/boot firmly around the front panel opening
• Helps maintain a watertight seal during wash and spin cycles
• Replaces a stretched, broken, or missing clamp/spring
• Common symptoms: boot won't stay seated, water leaking at the door opening, visible broken/missing spring

• Disconnect power and turn off the water supply before servicing
• Open the door and carefully remove the existing clamp from the gasket groove; avoid puncturing the boot
• Reseat the boot evenly, then stretch and position the new spring/clamp around the groove (spring typically at the bottom)
• Test for leaks after reassembly

The Carbon brush, drum motor is an OEM part for Bosch washing machines. These carbon brushes are responsible for transferring electrical current from the commutator on the motor to power the rotary movement inside the washing machine drum.  Two come per package.

Symptoms of a bad carbon brush, or drum motor can include:

• noisy or squealing sounds coming from the motor during the operation  
• the drum fails to spin or spin inconsistently
• the washer is unable to enter spin cycles
• slow or reduced agitation 

Causes of a bad part include normal wear and tear over extended use. As the brushes continuously contact the commutator, friction can cause them to wear down over time.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This Drain Pump is an OEM part for Bosch Washers. It facilitates water drainage from the washer during the cycle. Continuous use and debris accumulation can affect the pump's performance.

What Causes a Bad Drain Pump:
Debris, foreign objects, or wear from continuous use can lead to clogs or mechanical issues with the drain pump.

Symptoms of a Bad Drain Pump:

• Standing water in the washer drum after the cycle
• Slow or incomplete drainage
• Unusual noises during the drainage cycle

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This gray rear door panel forms the inner half of the washer door assembly. Replacing a cracked or warped panel restores door integrity, supports the glass, and helps the door seal close and latch as designed. What it does:

• Serves as the inner structure of the washer door and mates with the outer frame
• Supports and positions the door glass and related trim
• Helps maintain proper seal between the door and tub boot to minimize leaks
• Common symptoms: cracked/broken panel, difficulty latching, door misalignment, leaks at door area

• 1 rear door panel in gray

• Disconnect power and turn off water supply before servicing
• Remove the door from the hinge, then separate the door halves by removing perimeter screws/clips
• Transfer the door glass and any reusable hardware/trim to the new panel; keep orientation consistent
• Inspect the door boot lip and ensure it seats properly; verify smooth closing and latching before use

The Drum Drive Motor is an OEM part for Bosch washing machines. This motor powers the drive system that rotates the wash drum and tumbles clothes during cycles.

Causes can be normal wear and tear over time spent rotating heavy loads daily. Failure of motor windings from years of continuous use is also common.

Symptoms of a bad drum drive motor include:

• The wash drum failing to turn or tumble clothes
• Abnormally long cycle times
• Strange noises coming from the motor area
• The machine not advancing through cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Restore smooth, secure door movement with this door hinge. It supports and guides the door through opening and closing, helping ensure proper alignment and consistent sealing so the appliance operates safely and efficiently.

• Supports the door's weight and pivots for smooth opening/closing
• Helps maintain correct door alignment and gasket contact
• Wear or damage can cause sagging, misalignment, noisy operation, or incomplete closing
• Replacing a worn hinge can improve door seal and overall performance

• Disconnect power and allow the appliance to cool before service
• Support the door during removal to prevent strain on the remaining hinge
• Transfer any original fasteners to the new hinge if re-used
• Check door alignment and operation before restoring power

The Drive Belt is an OEM part for Bosch washing machines. This belt connects the motor to the drum, enabling the drum to spin during the wash and spin cycles. This belt measures  49.4 inches and replaces a broken or damaged original belt. With 5 ribs and 4 grooves, the high-quality belt transfers drive power to rotate the drum.

Causes of a bad drive belt include normal wear and tear over time, overloading the washer, or a misalignment of the belt and pulleys. These issues can reduce the efficiency of the washing machine and cause it to malfunction.

Symptoms of a bad drive belt include:

• The drum not spinning or agitating
• Unusual noises during operation
• Burning smell from the washer
• Washer stopping mid-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

This latch secures the appliance door closed and lets the control know when it's safe to run a cycle. Replacing a worn or damaged latch restores reliable door closure and consistent cycle starts.

• Engages the door strike to hold the door shut during operation
• May include an internal switch that signals door-closed status to the control
• Helps prevent cycle interruptions caused by a door-ajar condition
• Common symptoms: door won't latch, door pops open, cycle won't start, "door open" message or beeping

• Disconnect electrical power before servicing; shut off water supply if applicable
• Access and fasteners vary by model; latch mounts at the door/front panel area
• Transfer any mounting hardware and connectors from the original part one-for-one
• After installation, verify proper alignment with the door strike and that the unit recognizes "door closed"

This valve magnet is the solenoid actuator used to open and close a dishwasher water/control valve, restoring proper water flow for filling and cycle operation. It replaces a failed or weak magnet to help the valve respond correctly. What it does:

• Converts electrical signal into linear motion to operate the dishwasher valve
• Restores valve opening and closing when a worn or stuck magnet causes fill or circulation issues
• Commonly used when dishwasher won't fill, stops mid-cycle, or shows related valve/fill errors
• Works with the valve body; does not include seals or the full valve assembly

• Disconnect power and shut off the water supply before beginning service
• Replace with the matching OEM magnet and ensure proper seating on the valve body
• Keep terminals dry and secure electrical connections; inspect gaskets and valve body for damage

Replacement dishwasher door handle that restores a secure grip and proper door operation on compatible Bosch dishwashers. Restores function and appearance so the door opens and closes smoothly and safely. What it does:

• Replaces a cracked, broken, or missing door handle to restore safe opening and closing.
• Secures to the dishwasher door so the latch and seal operate without interference from a loose or damaged grip.
• Reduces wobble and prevents slipping when pulling the door open.
• Helps avoid accidental drops or damage caused by a compromised handle.

• Disconnect power to the appliance before starting; for dishwashers also turn off the water supply if panels or connections will be removed.
• Support the door while removing and installing the handle to prevent it from dropping or bending.
• Basic hand tools (screwdriver, possibly socket) are typically required; retain any original screws or clips unless the new part includes replacements.
• Follow OEM disassembly steps for inner door panels if the handle attaches from inside the door.

This is a valve magnet intended for use in washing machines. The valve magnet's purpose is to allow water to flow into the appliance during the different washing and rinsing cycles.Signs that indicate the valve magnet is malfunctioning or damaged include the washing machine shutting off before the cycle is over, water overfilling the machine, or water not shutting off at all. The replacement of the part is a simple process. Disconnect the appliance from its power source first. The water connections should also be shut off and removed from the washing machine. Wear gloves for safety. Ensure all connections are secure before reconnecting the device to the electrical outlet.This valve magnet is a genuine OEM replacement part. It is sourced from the manufacturer. The valve magnet is sold as an individual unit. The part is made of durable, high-quality materials. It can be installed in several models of washing machines. It is compatible with devices produced by Bosch, Thermador, and Gaggenau.

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

The Door Latch is an OEM part for Bosch washing machines. This latch securely fastens the washer door shut during operation.

Causes of a bad door latch can include wear and loosening of moving components from repeated use, or damage from forced door openings.

Symptoms of a bad door latch include:

• The door popping or releasing unexpectedly during a cycle
• Difficulty fully closing and latching the door
• Water leaks due to poor door sealing

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.