String Trimmer Handle

This handle assembly is a genuine Husqvarna part. It is an appropriate, exact replacement for a missing handle assembly or an original handle assembly that has been damaged. It is a genuine OEM sourced part sourced from the manufacturer. This part of the trimmer/edger is where the switch controlling the throttle is located. It provides the user with an exceptionally comfortable grip while using the trimmer/edger.To repair, remove the original handle and disconnect any electrical connection. Next remove the cutter shaft and throttle cable. Carefully attach the new handle, then reattach the throttle cable and wiring. Users will need a screwdriver, Torx driver, and pliers to replace this part on compatible models. This repair should take under one hour and is appropriate for people with moderate skill levels. The part does not include the throttle cable, which is sold individually.It is compatible with the Husqvarna 122C trimmer/edger, as well as the 122LD trimmer, 122LDx trimmer/edger, and 122LK trimmer, and other Husqvarna models.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

The Left Hand Housing Throttle is an OEM part for Husqvarna power equipment, specifically designed to encase and protect the throttle mechanism. This housing component is crucial for the proper function and safety of equipment such as chainsaws, trimmers, and blowers, ensuring that the throttle operates smoothly and is well-protected from external elements and debris.

Symptoms of a bad Left Hand Housing Throttle include:

• Difficulty in engaging or controlling the throttle
• Visible cracks or damage to the housing
• Loose or unresponsive throttle action

Causes of a bad housing throttle can stem from accidental drops or impacts during use, exposure to harsh environmental conditions that degrade the material, or general wear and tear from regular use.

Replacing a damaged or malfunctioning throttle housing is essential for maintaining the effectiveness and safety of your Husqvarna equipment, ensuring that all controls remain responsive and protected.

This throttle trigger is designed to open and close the throttle, or to control the speed of the engine. This part is mounted to the control handle on the equipment's shaft. With constant use, the throttle trigger may break or wear out. Use this genuine OEM throttle trigger in red to easily replace a damaged one. A screwdriver and long-nose pliers will be needed for the job. This OEM replacement throttle trigger is compatible with specific models of edgers and trimmers from Bolens, Craftsman, Cub Cadet, MTD, Ryobi, Troy-Bilt, and Yard-Man. It is sold individually.

This throttle housing & trigger assembly is a genuine MTD replacement part for a handheld gas lawn trimmer. A lawn trimmer is designed to cut grass, shrubs, bushes, and weeds. The throttle housing & trigger assembly is a kit containing a black plastic throttle housing, a trigger, a spring, and the screws to bind the pieces together. The function of a throttle housing is to house the throttle for the lawn trimmer, which spins the blades at specific velocities, with a full throttle corresponding to full blade velocity. The trigger assembly consists of the trigger itself, the hammer, the disconnector, and the springs, and the function of the trigger is to activate the engine, thereby engaging the throttle.In order to replace the throttle housing, the engine must not be running and the oil should be emptied from the tank. If the throttle housing & trigger assembly is damaged to the point that the lawn trimmer is unusable, the throttle housing & trigger assembly should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This throttle housing & trigger assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens. This part sold individually.

This is a starter grip that is used on many different types of lawn and garden equipment. The starter is the part that engages the pull rope when the user yanks on it. This causes the engine to turn quickly enough for the ignition module to make a spark. This spark is used to ignite the gasoline in the cylinder. The starter grip is made of durable plastic but can become damaged, broken, or lost. The starter grip has an important function in starting the tool while also being comfortable to use.If the starter grip needs to be replaced, a socket wrench and a screwdriver will be required. Put the tool on a flat surface and remove the spark plug wire before making the replacement. Disassemble the tool to reach the starter assembly so the grip can be removed. Replace the grip and reassemble the parts.This starter grip is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The starter grip has been designed to fit tillers, edgers, string trimmers, hedge trimmers, and leaf blowers manufactured by Mantis, Little Wonder, and Echo.