String Trimmer Tank & Container

This fuel tank assembly stores fuel. It is made from a thick plastic material. The assembly includes the fuel tank, fuel cap, and fuel lines. Although it is generally durable, exposure to fuel chemicals and the environment can eventually cause fuel tank leaks. When this happens, the fuel leak may damage other components. To install a new tank assembly, make sure to drain the old tank first. Detach the fuel lines and then use a screwdriver to remove its mounting screws. This replacement will take less than 10 minutes to complete. MTD makes this brand-new fuel tank assembly. This replacement includes the tank itself, the fuel lines, fuel cap, and mounting screws. All of which are sourced directly from MTD. It is compatible with string trimmer models from Bolens, Yard-Man, Murray, Craftsman, Yard Machines, MTD, Cub Cadet, and Troy-Bilt. This fuel tank assembly doesn't include the original MTD air filter.

This is a fuel tank for MTD string trimmers. It’s constructed from white resin, which combines the tank and mounting flanges in a one-piece, molded design. The gas cap is glossy black plastic, and the tank and primer leads are both already installed. There are two mounting screws included in the kit, making installation more convenient. This is a 2-cycle fuel tank designed for engines that run on a mixture of oil and gas. Ordinary gasoline can cause damage to the fuel lines. Tanks should ideally last for several years but can get damaged, causing a leak. Gas tank leakage is a significant safety issue and must be fixed immediately. Tanks may also need to be replaced if they become extremely soiled. To replace the tank, you will simply need to disconnect the old tank’s fuel lines and remove the two mounting screws. In addition to MTD trimmers, this tank is also used on some Troy-Bilt and Cub Cadet models. This is an OEM part sourced directly from the manufacturer, and it is sold individually.

This fuel tank assembly from MTD is a genuine replacement part. It is a fuel reservoir made from a thick and durable plastic material. It is designed to fit and work with tillers, edgers, and string trimmers from MTD, Craftsman, Cub Cadet, and Yard Machines. When this fuel tank wears out, liquid may seep out and waste gas. A fuel tank assembly replacement is easy. The process will take approximately 30 minutes or less. First, make sure that the machine has cooled down and there is little fuel left in the tank. Make sure to wear gloves since fuel spills can occur, especially when removing the fuel lines. Then, remove the spark plug connector to prevent the engine from starting. Disconnect the fuel line and unfasten the mounting screws of the fuel tank. Install the fuel tank and attach the fuel line. This replacement fuel tank assembly is sold individually. The assembly includes the tank, fuel cap, and one fuel line. It is an original replacement made directly by MTD.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

The plastic fuel tank is responsible for storing the fuel that will be used by the lawn and garden equipment. The fuel tank is meant to be durable. However, this does not mean that it can't become broken. Damage to the fuel tank could cause a leak, which could be dangerous and waste fuel. Whether it is through wear and tear or an accident that causes a problem with the gas tank, such as a hole, it will need to be replaced. This is a genuine OEM replacement fuel tank that will work with string trimmers, edgers, and leaf blowers. It is compatible with models from Craftsman, MTD, Cub Cadet, and Troy-Bilt. It is important to note that this product is sold individually. It does not come with the fuel cap that will be needed to keep the fuel tank safe from an influx of air and debris. The cap will need to be purchased separately. Buyers should always make sure the tank they are choosing will work with their make and model.

This is a genuine OEM replacement fuel tank that is sourced directly from the manufacturer. It is used in various trimmer models and holds the fuel for operation. When the machine is not in use for long periods, the fuel that is in the tank causes the tank to become brittle. Exposure to the elements and normal use may also cause damage to the tank. Cracks, pinholes, leaking fuel lines, or bad O-rings in the fuel cap can all lead to fuel loss that not only affects engine performance, but that could also be a safety hazard.Turn the engine off and allow it to cool. Empty the fuel into a clean container to reuse later. Disconnect the fuel lines from the fuel pump. These lines are part of the fuel tank. Remove the fuel tank and lines. Install the new fuel tank with fuel lines. Refill with fuel and apply the fuel cap. Reinstall the spark plug. Check the new fuel tank for leaks.This fuel tank is made of high-quality white plastic with a black cap. It is sold as an individual unit complete with attached fuel lines and a fuel cap. It is compatible with string trimmers manufactured by MTD, Troy-Bilt, and Cub Cadet.

This genuine Husqvarna replacement fuel tank contains the fuel that is responsible for running the engine of the lawnmower. Fuel tanks are also responsible for preventing leaks and keeping the fuel from running dirty.The fuel tank of a lawnmower might need to be replaced in the case of punctures or cracks in the exterior of the tank. If there is a noticeable amount of fuel leaking or there is dirt or debris found in the fuel tank, the fuel tank should be removed and replaced immediately. The lawnmower should not and cannot be used until the fuel tank has been replaced. A replacement generally takes about 20-30 minutes and can be performed using a flathead screwdriver and clamps.This OEM fuel tank is compatible with the following lawnmower brands: Husqvarna, Craftsman, Poulan, Roper, and Weed Eater. This part is sold individually.

This is a ready-to-install fuel tank assembly designed for use on trimmers. It is made of high-quality plastic. The assembly includes a translucent tank, a fuel filter inside the tank, an attached fuel tank cap, and a fuel line hose. If the trimmer is leaking gas, check the fuel tank, cap, fuel lines, grommets, fuel filter, and the primer bulb. Options include replacing individual parts depending on which components are damaged or installing a new fuel tank assembly. Remember that any gas-leak related incident requires immediate attention. This is an OEM replacement part sourced directly from the manufacturer. The assembly kit is compatible with specific trimmer models from Craftsman, Weed Eater, and Poulan. It is sold individually.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for a string trimmer. The fuel tank provides a storage place for the fuel that powers the engine. The fuel tank of a string trimmer might have to be replaced in the event that it can no longer properly store fuel and dispense the fuel to the spark plugs in order to ignite the engine. If the fuel tank is punctured or leaking, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Poulan.