String Trimmer Control Cable

This clutch cable kit is an authentic OEM replacement part for a riding lawn mower or tractor. The clutch cable connects to the idler arm located in the lower deck of a mower and allows the operator to manually engage or disengage the blades. The clutch cable runs up through the steering block and into the front display so that the operator can easily access the clutch. If a clutch cable becomes jammed or tenses up, it will be difficult to depress. If the operator tries to depress the clutch cable without realizing that it is jammed, the clutch cable will snap. The most obvious sign of a snapped clutch cable is that the clutch gives little resistance and the blade cannot be engaged. To change a clutch cable, use a socket set to remove the fuel tank and gain access to the cable. A pair of needle nose pliers is also recommended. This replacement part is compatible with Weed Eater, Husqvarna, Ryobi, and Poulan appliances and comes sourced from its original manufacturer. This part includes a clutch cable and a zip tie.

This throttle cable is a genuine MTD part, sold individually. This throttle cable can be used as a replacement part for string trimmers. The purpose of a throttle cable for a string trimmer is to allow the speed of the engine to be easily regulated when pulling on and engaging the cable.The throttle cable of a string trimmer might have to be replaced at some point within the standard lifespan of a string trimmer in the event that the component is not functioning as it usually does. This could be the case if the throttle cable is damaged in the form of tearing, ripping, fraying, or erosion to the material. If the speed of the engine is not being regulated by the throttle cable when pulled or engaged, the throttle cable should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This throttle cable is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, and Craftsman.

This is a genuine OEM throttle cable that is designed for use with select gas string trimmers. The throttle cable connects to the carburetor and is used to stop the engine from running when the lever is shifted from throttle to choke. Over time, this cable is extended and retracted frequently and can become worn with use. It consists of the metal throttle cable and the plastic housing, and those can get broken or damaged as well, which will require the need for a full replacement. Without a functioning throttle cable, the engine may not run correctly, or the speed of the engine will not be able to be controlled. This replacement cable is ideal for compatible devices. This OEM throttle cable is manufactured to exact standards by MTD. It can be used with a variety of models of trimmers from MTD, Troy-Bilt, Yard Man, Cub Cadet, and Yard Machines. It is made of durable metal with a composite plastic housing. The trigger and screws are sold separately and will require an additional purchase if needed. Be sure to wear gloves when performing any equipment repairs.

This throttle cable is a used on string trimmers. This part links the carburetor assembly to the throttle trigger. Each throttle cable is made with a connector on each end. Over time, the throttle cable can be damaged or kinked through use. If this occurs, the cable will need to be replaced.Replacing the throttle cable will require basic tools and a set of work gloves. The first step to replacing the throttle cable is removing the original component. The throttle housing will need to be taken apart on each side of the string trimmer. The replacement cable will pass through the carburetor mounting plate hole and the engine housing before reassembling the rest of the parts.This throttle cable is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The throttle cable is made for use with string trimmers manufactured by Yard Machines, MTD, Craftsman, Murray, Yard-Man, Bolens, and Cub Cadet.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a lawnmower. The purpose of the control cable in a lawnmower is to allow the operator to monitor and regulate the speed, pace, and propulsion of the appliance by engaging and disengaging the cable.Over time, a control cable may experience fraying, scratching, tearing, ripping, warping, or eroding. If this occurs, the control cable should be removed and replaced by this genuine OEM replacement part in order to facilitate continued use of the lawnmower by the operator in a safe and proper manner.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Murray.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This cable wire harness assembly is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. A cable wire harness assembly is designed for use with edgers, trimmers, or string trimmers. It is compatible with products from brands such as Husqvarna and Poulan.The cable wire harness assembly is a complete part assembly, and it includes both the throttle cable and the control wires. This item is used to run the motor as well as to adjust the engines out by linking the control handles. The replacement or repair process of the cable wire harness assembly is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This transmission control cable is made for riding lawn mowers and garden tractors. It is the cable that engages the gear case to drive the equipment. Over time, it may wear out or become damaged, eventually requiring a replacement. Check the drive control cable when the lawn mower won't move or moves forward slower than usual, because the drive cable can stretch over time. The user won't be able to move the drive lever if the cable is too corroded to slide inside its sheath. If the cable is cut, the mower will not move. Replace the control cable if it's damaged or cut.Replacing the transmission control cable will require a selection of hand tools, including a screwdriver, ratchet, and sockets. Owner's should wear gloves when working on their lawn tractor, and always follow the owner's manual instructions.This transmission control cable is compatible with Husqvarna-branded lawn tractors. This replacement will also fit other Husqvarna produced brands, like AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Weed Eater. This is an OEM part and is sold individually.

This replacement part is a cable drive and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Cable drives allow the user to control the transmission during.A new cable drive might be needed if the user is not able to control the transmission with the current cable drive. It is common that this part become damaged after years of normal wear and tear as it is a heavily used part in lawn mowers. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.