String Trimmer Spring Parts

This recoil spring is a genuine Husqvarna part, sold individually. This recoil spring can be used as a replacement part in a string trimmer. This part holds the pulley in place and assist with powering the appliance.The recoil spring in a string trimmer might have to be replaced if it suffers damage that renders the recoil spring incapable of performing its typical function at some point in the standard lifespan of the appliance. The recoil spring could be damaged as a result of general wear and tear from long-term use or due to a collision with a hard object.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This recoil spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This replacement part is a starter assembly. This is a genuine replacement part made by MTD. The starter assembly assists the user in starting and stopping the machine according to the desired settings while in use. A new starter assembly might be needed if the current one is no longer connected to the machine properly. If the wires in the assembly have become worn down or damaged, it could stop the equipment from working altogether. If this is the case, be sure to replace this part as soon as possible. The engine should be completely turned off during this repair job to ensure the safety of the user. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

The torsion spring is designed to create tension between various components in lawn and garden equipment engines. This spring may have multiple applications depending on the type of machine. The torsion spring typically connects levers and other things that need pressure to operate properly. They create torque and help support various items in lawn and garden machines. Over time, they can become worn or the springs can stretch or snap. This will require a replacement of the entire spring, since the unit will typically not be able to function without a properly working torsion spring. This genuine OEM replacement spring is manufactured to exact standards by MTD. This part can be found in hundreds of models from MTD, Yard Machines, Cub Cadet, Troy-Bilt, Husky, Bolens, and Yard-Man. Check the parts diagrams and equipment manual for the exact location and application of this torsion spring. This high-quality spring is made of metal and is sold as an individual unit. Always wear gloves when performing repairs on lawn and garden machines. Beware of pinching and crushing injuries when working with springs, which are typically under a lot of pressure.

This genuine OEM replacement part is an extension spring for a Craftsman snowblower idler pulley assembly. The idler pulley attaches to a part of the snowblower's housing and is helps to transfer energy throughout the belt drive. This extension spring helps to redistribute some of the back-and-forth motion created in the pulley as the snowblower runs. This keeps the assembly from shifting out of place and potentially slipping. This extension spring is attached at two points and, if pulled in both directions too far, can eventually lose some of its tension. When this happens, the idler assembly can begin to shake and even slip out of place. Replacing the extension spring is an easy job that will only require a socket wrench to remove the idler pulley. A pair of pliers may help to remove the spring from its clips. This part is only compatible with Craftsman snowblowers and is sourced from its original manufacturer. It ships individually and any additional parts needed will have to be purchased separately.

This is a high-quality spring is located between the spool and the spool housing and is part of the string advancing system on trimmers and chainsaws. This spring can become damaged and/or lose some of its tension as time goes on. When springs become lost, weak, or damaged, the machine the spring is used in will no longer work properly and the spring will need to be replaced. If the spring needs to be replaced, the first step is to remove the line and reel assembly. Unscrew the bump head knob and take out the reel and line assembly. Next, remove the slider springs and the plunger. The plunger spring can be removed and a set of pliers can be used to remove the E-clip from its shaft. After removing the slider, the spring can be taken out. The new springs can be installed in the same way before reassembling the other parts.This is a genuine OEM replacement spring directly sourced from the manufacturer. It is sold individually. The spring is compatible with several Echo string trimmer and chainsaw models.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are commonly found in many appliances and assist in connecting certain parts so that the appliance is able to run smoothly. A new spring might be needed if the current one is stripped down or is no longer functioning properly. This can be due to normal wear and tear after years of use. Due to the nature of certain springs, these parts can snap under pressure and should be replaced if this is the case. Work gloves are recommended when replacing this part as this spring is often found close to other dangerous parts. This specific spring is sold individually and is sourced directly from the manufacturer for long-lasting use. This part is a genuine OEM replacement part to ensure proper fit.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.

This spring is a genuine Echo part, sold individually. This spring can be used as a replacement part for string trimmers. In a string trimmer, the function of the spring is to maintain the placement of the components to which it is linked through the use of spring tension. Damage to a spring can be very dangerous for appliances due to the amount of tension that springs are placed under. If there is damage to a spring that loosens its tension, it should immediately be removed and replaced by this genuine OEM replacement part before using the string trimmer again. This damage can come in the form of general wear and tear from exposure or aging, or as a result of a collision with a falling or a hard object that can warp the spring beyond functionality. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This spring is compatible with the following outdoor appliance brands: Echo and Shindaiwa.