String Trimmer Axle, Roller, Shaft, Wheel

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This is a genuine replacement wheel for select push mowers. The wheels assist with maneuvering the Lawn Mower and keeping the mower deck from coming in contact with the ground. On select models, the wheels are what offer a cutting height adjustment so that the grass can be cut to the appropriate length. Wheels can be damaged or become worn with regular use, necessitating a replacement. This wheel can provide the appropriate manufacturer part for compatible machines. Those who need to replace multiple wheels will have to order this part in multiple quantities. This genuine OEM replacement wheel is designed to be compatible with select lawn equipment from Husqvarna and Weed Eater. The wheel is made of durable composite plastic and sold as an individual piece. The washer and axle bolt required to secure the wheel will need to be purchased separately. This part can be replaced with a wrench and should only take a few minutes to repair. Always wear gloves when working on lawn equipment.

This mow ball assembly is used in many Husqvarna string trimmers to offer a height guide that prevents the trimmers from cutting grass or other foliage too low. This is an entire assembly that includes the ball bearing, plastic housing, and retaining ring needed to replace the mow ball. The bolt that is used to attach the part to the string trimmers is available separately. If the mow ball assembly is broken or damaged, the guide for the blade will not function and the trimmer may cut the grass too close to the ground. The first step to replace this part is unbolting the assembly using the bottom bolt located on the shaft of the cutter. Clean all the parts before greasing the adjustment button to make it easy to move. Take off the mow ball assembly and replace it with a new one.This part is sold as an individual unit. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The mow ball assembly is compatible with string trimmers manufactured by Husqvarna.

This is a drive shaft assembly kit that is intended for use with gas-powered trimmers. This driveshaft assembly kit is identical to the one that was installed on the original unit. This part helps rotate the cutting head so that the trimmer can cut grass and weeds. A new drive shaft assembly kit may be needed if the original is cracked, broken, or damaged in any way. Additional signs that a new drive shaft assembly kit will be needed are if the trimmer head does not turn or if the trimmer is vibrating excessively. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This drive shaft assembly kit is a genuine OEM Husqvarna part. It is sold individually. This specific drive shaft assembly kit is compatible with gas-powered trimmers that are manufactured by the Husqvarna brand and the Weed Eater brand.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

The main drive shaft that the gearbox is attached to is called the drive shaft housing assembly. It connects the power source from the device to the top of the tool. The motor or engine's power runs through the drive mechanism to power the head to rotate while working. The metal piece is used to turn the gearbox in various types of lawn equipment, including blowers and trimmers from several different manufacturers. Signs that a replacement part is necessary may include poor performance or excessive vibration while in operation. Over time, the drive shaft will wear out from normal use or it can become damaged.The replacement of a drive shaft housing assembly is simple with the proper screwdriver and pliers. Replacement involves unscrewing the drive shaft housing from the throttle assembly. Remove the two screws holding the shaft in place. Screw in the new replacement part.The drive shaft housing assembly is supplied directly from the manufacturer and is a genuine OEM part. It is sold separately and individually. The replacement part can be used in MTD, Troy-Bilt, Bolens, and Yard Machines brand equipment. It is compatible with both blowers and trimmers. The piece is made from high-quality, durable materials.

This lower boom assembly is for use with gas trimmers. Another name for the part is a lower shaft assembly. It is a replacement used for missing or faulty lower shaft housing assemblies on the trimmer. The lower housing is responsible for holding the spool that cuts the grass.If there is a problem with this component in the trimmer, it will not function properly and could be dangerous to operate. The lower housing may not be able to hold the spool properly. The shaft on the trimmer is durable, but it could become damaged during operation. There is also the chance that corrosion could affect the quality of the lower boom over time. Whenever there is a problem with the shaft, the best course of action is to replace it before it breaks entirely.The lower boom assembly for trimmers is compatible with a range of models from MTD, Yard Machines, and Murray. It is made from durable metal. This is a genuine OEM part sourced from the manufacturer. It is sold individually.