Trimmer Head

This is a genuine replacement for the line trimmer gearbox on select outdoor power trimmers. The gearbox is the housing that holds the gears responsible for turning the line reel. When the line reel turns, the string cuts grass and weeds. This part is made of durable metal, but it is also exposed to the elements and a lot of constant vibration, so it can become damaged over time and will need to be replaced. If the trimmer head stops spinning or there is a sudden grinding noise, it could indicate that this part needs replaced. It's important to use an OEM replacement for best results. This unit is sold as a complete assembly and includes the mounting hardware, three screws, head assembly, and the cap. A hex screwdriver, socket or wrench set, and Phillips screwdriver will be necessary to replace this part. Be sure to allow the unit to cool and wear gloves whenever performing repairs.This genuine OEM line trimmer gearbox is manufactured by MTD and compatible with machines from Craftsman.

This hub is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The hub is a crucial piece of a lawn trimmer that turns the string with enough force to cut through plant material. The hub contains the string that is unspooled when the engine is running and a cap with piercings through which the string is unspooled. A lawn trimmer hub might have to be replaced if an incompatible string is used on the lawn trimmer, such as a heavier string that cannot be properly spooled and unspooled by the hub. Additionally, a hub might have to be replaced from general overuse or long-term use. To remove and replace the hub, one will need a Phillips screwdriver, a flathead screwdriver, and an adjustable wrench. If the hub is damaged to the point that the lawn trimmer is unusable, the hub should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hub is compatible with the following brands: Husqvarna, Poulan, and Weed Eater. This part sold individually.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This replacement part is a line head assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as a line trimmer or edger. This metal cutting head attaches to the gearbox assembly and is responsible for securing the fixed trimming line strips. A new line head assembly might be needed if the current one is damaged or broken in any way. If this part has become detached and the user is unable to reattach this part, it is best to replace it as soon as possible. Be sure the engine is completely powered off before attempting to replace this part. Refer to the owner's manual for more detailed instructions on how to replace the line head assembly. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This is a gear box assembly that is a part of many types of gasoline-powered string trimmers. The gear box assembly is attached to the lower boom assembly. The purpose of the component is to spin and drive the trimmer head to cut through weeds and grass. The gear box assembly is attached to the string trimmer by two screws. This assembly comes with a trimmer head.If the gear box assembly has been damaged and needs to be replaced, a screwdriver will be needed. Place the string trimmer on a level surface and disconnect the spark plug wire for safety. Use a screwdriver to remove the screws from the old gear box assembly so it can be taken off. Use new screws to install the replacement component. Retighten the screws before use.This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The gear box assembly is designed to be used with string trimmers manufactured by MTD, Bolens, and Yard Machines.

Here is a replacement reel with line for use with string trimmers. This is an authentic part that has been sourced from the manufacturer. These reels or spools with line are one of the most vital parts of a string trimmer. The reel holds the line that is used for cutting. Users will pull out enough line, which will then cut through the grass or other material when it starts to spin. Everyone who has a trimmer will have to replace their reel with line. As the line becomes worn from use, it is removed, and new line is pulled forward. When this runs out, owners will need to replace the reel. If there is an issue with the reel, such as a break, it will need to be replaced, as well. The replacement is fast and simple. It will typically just snap into place. This genuine OEM replacement reel with line is specifically for string trimmers. It is sold individually. The replacement is compatible with MTD machines.

This part is a replacement cutting head assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective cutting head assembly on trimmers. The cutting head contains the cutting line that is used to trim plants and greenery. The cutting head experiences significant wear and tear over time, in particular, the cutting line itself. It will likely require replacement in the standard lifespan of the trimmer. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this cutting head assembly, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this cutting head assembly is suitable for use on several models of trimmers manufactured by MTD, Troy-Bilt, Yard Machines, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This is a wound spool assembly that can be used on several models of lawn and garden equipment. The spool assembly is the part that holds the trimming line. It also operates by letting the line feed out when a trimmer or pruner is being used. The wound spool assembly is a component of the cutting head assembly but can be replaced as a single part. This wound spool assembly part experiences a great amount of wear and tear. It's not a bad idea to have an extra available for any needed replacement. If the spool assembly is broken or damaged, it can be replaced in just a few minutes. The first step is to power off the equipment and remove the spark plug wire. The cover should be removed to get access to the wound spool assembly. Switch it out with the replacement part.This wound spool assembly is sold as an individual part. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The spool assembly is designed to be compatible with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Husqvarna.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This is MTD string trimmer line. The line is threaded through the string trimmer's head, acting as the cutting mechanism for taller weeds and grass. String trimmers use replaceable lines to cut taller grass along fence lines and sides of buildings where lawn mowers can't reach. This line is made from thick plastic, which can cut through even thicker stems and branches. When the string trimmer fails to cut correctly, inspect the head for the visible line. If the brand has a head that can be tapped to dispense line, try tapping first. If no more line gets distributed, it's time for a new package of string trimmer lines. Installing a string trimmer line is different depending on the type of string trimmer. Some string trimmers use smaller amounts, and the line has to be changed often. Other models have a self-dispensing spindle that can be tapped to extend the line available for cutting. Regardless of the model, the line is always installed through the spindle of the string trimmer.The specified product is a genuine OEM part sourced individually from the manufacturer. This line is compatible with most brands of string trimmers.

This dgenuine Echo drum lid, also known as a head cap or a head cover, can be used as a replacement part for string trimmers and brush cutters. The function of a drum lid for a string trimmer or a brush cutter is to house the string which is spooled out of the drum lid and spun in order to cut grass, shrubs, and other such greenery.Drum lids are often subject to replacement in the lifespan of a standard string trimmer or brush cutter. Having a replacement drum lid ready whenever the old drum lid shows signs of aging or general wear and tear from long-term usage will save you time and effort, and it will ensure that your appliance is maximally functional and efficacious. If a drum lid shows visible damage, it should be removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This drum lid is compatible with the following brands: Echo and Shindaiwa.