Parts for Maytag MDC4809AWB2: 05 - Tub And Frame Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Complete dishwasher tub assembly. Replaces cracked, leaking, or damaged tubs that cannot be reliably repaired due to heat and detergent exposure.

Fill and drain hose assembly for portable dishwashers. Connects unit to sink faucet. Replace if coupler leaks, hose cracks, or connections loosen.

Fix dishwasher leaks on the floor with this door gasket and strike kit. Easy 15-minute repair—gasket presses into groove, no glue needed. Video included.

Dishwasher door frame that forms the structural support around the door perimeter. Replace if cracked, warped, or damaged to restore proper door fit.

This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.

• Fastens brackets, panels, and internal components to their mounting points
• Maintains alignment and reduces vibration during operation
• Replaces missing, worn, rusted, or stripped hardware
• Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position

• Disconnect power; shut off water or gas supply if applicable
• Align the part being secured and remove any damaged hardware
• Hand-start threads to avoid cross-threading; tighten with the correct driver
• Do not overtighten; verify the assembly is secure and operates freely

Specs: 10-16 x 1/2 inch.

Friction pad for dishwasher door hinge assembly. Reduces friction for smooth door operation. Replace if cracked, broken, worn, or missing from spring bushing.

Replace worn or cracked door spring bushings that secure the tension springs on your dishwasher door hinge assembly. Essential for smooth door operation.

Replace worn, broken, or missing caster wheels on your portable dishwasher. This 4-pack restores smooth rolling and easy positioning while protecting floors.

This is a genuine replacement screw used to secure components and panels on compatible Whirlpool appliances, restoring a firm, vibration-free fit. It replaces worn or missing fasteners to help keep parts aligned and stable. What it does

• Secures panels, brackets, or internal components to prevent shifting or rattling
• Replaces stripped, rusted, or missing screws that cause loose parts or noise
• Helps maintain proper alignment of mounted components for safe operation
• Useful when reassembling repair work or after removing parts for service

• One replacement screw

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread damage
• Disconnect power before servicing electrical appliances; follow OEM safety guidance
• If screw threads or holes are damaged, replace both screw and mating hardware as needed

Replacement door spring for dishwashers. Balances and supports the door during opening and closing. Replace if broken, fatigued, or door drops too fast.

Upper rack wheel and mount assembly for dishwashers. Mounts to the upper dishrack to allow smooth rolling. Replace if cracked, broken, or worn.

This replacement power cord supplies mains power to an electric range or oven, restoring reliable power delivery so the appliance can heat and operate normally. Designed as a direct-fit electrical cord for compatible models. What it does:

• Delivers line and ground connections from the wall outlet to the appliance electrical terminal
• Replaces a damaged, frayed, or burnt cord that can cause intermittent power or no power to the range/oven
• Helps eliminate loose connections that produce arcing, overheating, or tripping breakers
• Provides a correct, durable power connection when the OEM cord has failed

• Disconnect power at the main breaker or fuse box before starting work
• Access the appliance terminal block (usually behind a rear access panel) and reattach wires to the correct terminals
• Use proper wire connectors and tighten terminal screws to the manufacturer's torque; secure strain relief per the appliance design

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The Thermostat Clip is an OEM part for Whirlpool dishwashers. It plays an important supporting role by securely fastening the thermostat sensor inside the wash chamber. 

Symptoms of a faulty Thermostat Clip can include:

• Fluctuating or inconsistent water temperatures between cycles 
• Inability to properly detect temperature for desired heat levels
• Longer cycle times needed for reaching required temperatures
• Strange sounds or condensation around thermostat connection

Causes could arise from typical wear and tear stresses weakening plastic retaining clips. Exposure to harsh detergents may also erode clip material integrity over time.

This OEM replacement part is compatible with KitchenAid, Jenn-Air, Kenmore, and select Hotpoint and Roper dishwasher models as well. 

Thermostat has 1/4 inch terminals.

The High Limit Thermostat is an OEM part for Whirlpool dishwashers. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges. 

Over time, the high limit thermostat can become defective due to normal wear or electrical issues within the dishwasher. A malfunctioning thermostat may not accurately respond to temperature changes, which can lead to overheating or the dishwasher not reaching the necessary temperature for optimal cleaning.

Symptoms of a bad High Limit Thermostat include:

• Dishwasher not starting or completing a cycle
• The dishwasher stops heating water, affecting cleaning performance
• Overheating, which could potentially damage dishes or the dishwasher itself

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Door won't latch or close properly? The door latch strike secures your dishwasher door for a watertight seal. Simple 5-minute snap-in repair with video.

Protective guard for your dishwasher. Shields internal components from damage. Replace if cracked, broken, or missing to maintain proper protection.

Connects portable dishwasher hose to kitchen faucet. Replace if cracked, worn, or threads are stripped causing loose connection or leaks at sink.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.