Parts for Kenmore 665.12833K313 (66512833K313, 665 12833K313): Upper Rack And Track Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Upper dish rack assembly for dishwashers. Holds glasses, cups, and small items on the top level. Replace if cracked, warped, rusted, or deteriorating.

This small clip secures the guard/shield on the dispenser assembly. Replacing a cracked or missing clip keeps the guard firmly attached and aligned so the dispenser operates properly without interference, noise, or premature product loss. What it does:

• Fastens the dispenser guard to its mounting point on the dispenser assembly
• Keeps the guard aligned to prevent interference with dispenser door/flow
• Restores a secure fit if the original clip is cracked, deformed, or missing
• Common symptoms: loose or missing guard, rattling, incomplete dispensing or residue left after a cycle

• 1 dispenser guard clip

• Disconnect power to the appliance; turn off water supply if applicable
• Open access, support the guard, and release the worn clip from its tabs
• Snap the new clip fully into place, ensuring it engages all locking points
• Ensure the guard is secure and that the dispenser door/flow path is unobstructed before use

This factory screw secures panels, brackets, or components within your appliance. Using the correct OEM fastener helps ensure a snug fit and prevents loosening, rattling, or misalignment over time.

• Fastens metal or plastic components to maintain proper alignment
• Helps prevent vibration, noise, and loosened parts
• Common wear item that can strip, rust, or go missing
• Replaces damaged or missing hardware to restore secure mounting

• Disconnect power and shut off water or gas before service
• Note original screw location and orientation for proper reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• If threads are damaged, inspect the mating hole or clip before reuse

Replace your cracked, rusted, or broken dishwasher tine row. This adjustable row installs in the upper or lower rack for flexible dish loading.

The Tine Row Pivot is an OEM replacement part for Whirlpool dishwashers. This component is an integral part of the upper rack assembly, allowing the tine rows to fold down or pivot inward to accommodate taller items or create additional space within the rack.

Symptoms of a faulty tine row pivot may include:

• Tine rows not folding or pivoting smoothly
• Difficulty adjusting the tine rows to the desired position
• Tine rows becoming stuck or jammed in an open or closed position

Causes of needing to replace the tine row pivot can include normal wear and tear over time, physical damage from mishandling or impact, or issues with the pivot mechanism becoming corroded or obstructed.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models. 

Dishes tipping or rattling in your dishwasher rack? This tine positioner clip holds rack tines in place to keep plates stable and properly spaced during wash cycles.

Secures your dishwasher light lens firmly in place. Replace if worn, missing, or causing rattles and poor light positioning. Confirm fit with your model.

Right-hand track assembly that guides the upper dishwasher rack as it slides in and out. Replace if cracked, broken, or ball bearings fall out.

Left-hand track assembly guides and supports your dishwasher's upper rack as it slides. Replace if cracked, broken, or ball bearings have fallen out.

Clips onto the upper dishrack to hold the height adjuster assembly in place for balanced operation. Replace if cracked, broken, or missing.

Right-hand adjuster for dishwasher upper rack rail system. Replaces broken, cracked, or brittle adjusters. Installs at the end of the slide rail.

Left-hand adjuster for dishwasher upper rack slide system. Replaces broken, cracked, or brittle adjusters that prevent smooth rack operation.

This front housing assembly restores a secure mount and proper alignment for the components it supports. Replace a cracked or broken housing to eliminate looseness, misalignment, and cosmetic damage where switches, trim, or interface parts attach. What it does:

• Provides the structural frame for the front section of the assembly and secures related components in position
• Maintains proper alignment for buttons, levers, trim, or interface parts
• Replace when plastic is cracked, tabs are broken, or fit becomes loose
• Symptoms include a wobbly front, sticking controls, gaps, rattling, or visible damage

• One front housing assembly

• Disconnect power; shut off the water supply before service
• Retain and reuse existing screws and clips unless new hardware is supplied
• Carefully release plastic tabs; transfer any switches, gaskets, or UI parts from the old housing
• Do not overtighten screws into plastic; test operation before final reassembly

Secure mounting housing for dishwasher rack height adjustment mechanism. Replace if cracked, broken, or worn from repeated rack extension and retraction.

Adjuster cover for dishwasher upper rack height adjustment mechanism. Replace if cracked, broken, or missing to protect adjuster components from water.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Rear adjuster guide for dishwasher upper racks. Enables smooth up/down adjustment to accommodate different dish sizes. Replace if broken or missing.

Replacement 11-inch cup shelf assembly for dishwasher upper rack. Snaps onto rack to add storage for cups, bottles, and small items. Replaces missing or broken fold-down shelf.

Secures cups on your dishwasher's upper rack. Replace if broken, melted, or fallen off to prevent dishes from tipping during wash cycles. Verify fit.

Secures trim, panels, and hoses inside your dishwasher. Replace this small retainer clip when worn, broken, or missing to prevent parts from shifting.

Secures the fold-down cup shelf to your dishwasher's upper rack. Replace this nylon clip if it's cracked, broken, or missing to restore stability.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Replace your dishwasher's rack bar if it's cracked, broken, or missing. This structural component helps support and stabilize the dish rack assembly.

Stainless steel screw that secures the back panel to the side panel of your dryer cabinet. Replace if screw is stripped, missing, or corroded.

Fix a sagging or hard-to-open dishwasher door with this torsion spring. Restores smooth, controlled door movement and proper balance for easy access.

If your dishwasher door won't stay open or slams shut, this torsion hinge spring restores smooth operation and proper counterbalance. DIY-friendly repair.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.