Wall Oven Knob, Dial & Button

The Knob is an OEM part for Frigidaire ranges. This component allows users to control the heat levels of the burners or the oven by turning the corresponding control shaft. It ensures precise adjustments for cooking and baking.

Over time, the knob can wear out or break due to frequent use, exposure to heat, or accidental impacts. Causes of a bad knob include cracking, stripping of the internal connection, or the knob becoming loose and difficult to turn.

Symptoms of a bad knob include:

• Difficulty in turning the knob
• Inconsistent or unresponsive heat adjustments
• The knob becoming loose or falling off
• Visible cracks or damage to the knob

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This knob assembly is a genuine OEM replacement part that is found on range hoods. The knob is used to turn the power off and on to the fan and light. This knob is made of durable plastic, but it may crack and break over time. If this happens, it isn't easy to turn the shaft to the off and position that powers the fan and light. When the knob is damaged, it should be removed and replaced with a new one. Tools are not required to remove and replace the knob. To start, disconnect the range hood from the outlet or turn off the breaker. Grasp it tightly and pull hard. The knob will pop off. Line the new knob up with the slot and push it in place. Restore the power to the range hood.This knob assembly is a black plastic molded part sold individually. It is designed for range hoods manufactured by General Electric.

The Top Burner Control Knob is an OEM part for Whirlpool ranges and cooktops. This part is crucial for the precise control of the heat output from the burners, allowing users to adjust the flame or element temperature accurately. It fits directly onto the stem of the burner switch, providing a tactile interface for easy operation. 

Causes of a bad Top Burner Control Knob can include cracking, melting, or fading from exposure to heat or aggressive cleaning, as well as internal damage that can prevent the knob from engaging with the burner switch correctly.  

Symptoms of a bad Top Burner Control Knob include:

• Difficulty in turning the knob or a lack of resistance which indicates a failure to engage with the burner switch.
• Visible damage such as cracks, warping, or melting that interferes with function.
• Faded or worn labels that make it difficult to see the settings.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

LF, LR, RR Black

Color: Black

Knob, blk (cvs)

The Control Knob is an OEM part for Bosch ranges and cooktops. As the interface regulating gas flow, control knobs activate precise burner levels through internal calibration.

Causes of failure include loosened set screws beneath allowing knob slippage. Prolonged heat and moisture exposure may also degrade contact surfaces over time.

Symptoms of faulty knobs include:

• Burners failing to engage or not matching dial settings
• Inability to decrease output levels from full flame
• Knobs wobbling insecurely or detaching entirely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Color: Stainless

This replacement thermostat knob mounts on the oven control shaft so you can select baking and broiling temperatures. Swap a broken or stripped knob to restore smooth, reliable temperature selection and a clean, finished control panel. What it does:

• Attaches to the oven thermostat shaft to turn the control and choose a temperature
• Provides the hand grip/interface for turning the oven on/off and setting temperature
• Helps ensure positive engagement with the control; a worn knob may slip or spin freely
• Common symptoms: knob cracked, missing, loose, or won't turn the thermostat reliably

• One oven thermostat control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the thermostat shaft; do not pry sideways
• Align the new knob's flat/D-shaped recess with the shaft and press straight on until fully seated
• Verify orientation (OFF/indicator alignment) and confirm the knob turns the control without slipping

• Designed for the oven thermostat control (separate from surface burner knobs on many models)

This gas valve knob restores smooth burner control on your range or cooktop. Replace a cracked, stripped, or missing knob to reliably turn the valve from Off to Hi/Lo and fine-tune the flame.

• Mounts on the burner valve stem to select Off, Low, and High settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob won't turn the valve or align with settings
• Restores consistent feel and control during flame adjustment

• Ensure all burners are Off and the appliance is cool before servicing.
• Pull the old knob straight off the valve stem; do not force or twist the stem.
• Align the new knob with the flat/D of the stem and press firmly until fully seated.
• Disconnect power and shut off gas first if accessing internal parts is required.

This burner control knob replaces a worn or broken knob on your range or cooktop. Made for the standard burner position, it restores smooth on/off and heat-level adjustment while keeping the control panel looking clean and complete.

• Attaches to the burner/element control shaft to turn the burner on/off and adjust heat
• For the standard burner position; other burner types may use different knobs
• Common fix for knobs that are cracked, stripped, loose, or missing
• Restores a positive feel and clear setting selection

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; do not bend or twist the shaft
• Align the new knob with the shaft flat and press straight on until fully seated
• Verify smooth operation through all settings before use

Color: White. Measures about 2 inches in diameter.

This is a control knob for a range/cooktop. It lets you turn the burner valve shaft to adjust flame or heat settings. A worn or cracked knob can slip, sit crooked, or fail to turn the control smoothly.

• Replaces a damaged or stripped knob so settings engage properly
• Common symptoms: knob cracks, loosens, wobbles, or won't turn the valve shaft
• Restores clear pointer alignment and tactile click/feel during adjustment

• Disconnect power and allow all surfaces to cool before servicing
• Pull the old knob straight off the valve shaft; align the new knob's D-shape/flat with the shaft and press firmly
• Do not force—verify the knob matches the shaft style and location
• Test each control for smooth movement and correct alignment after installation

The Knob is an OEM component specifically designed for select Bosch gas cooktops. As the physical interface, it facilitates intuitive burner selection and precise flame level adjustment.

Durable polymer construction and tight mechanical tolerances withstand frequent adjustments without loosening or degrading. Ergonomic profiling allows natural operation even with pot handles obstructing access.

Causes requiring knob replacement usually relate to stripped or worn-down cams and gears from heavy usage. Over-tightening during cleaning could also permanently damage internal components. 

Symptoms signaling the need for a new knob include:

• Loose, wobbly, or difficult adjustment movements between settings  
• Knob rotation failing to properly engage control valves
• Stripped identification markings blurring burner association

This OEM Bosch replacement knob is also compatible with Thermador, Gaggenau, and selected Kenmore gas cooktops utilizing identical valve actuation mechanisms. Reinstallation preserves the intended control function.
 

This control knob attaches to the control shaft and lets you select settings on your appliance. If the knob is cracked, stripped, or missing, replacing it restores smooth turning and accurate setting selection.

• Provides a secure grip to turn the control shaft and choose temperature, cycles, or levels
• Replaces knobs that are loose, cracked, or spin without turning the control
• Restores proper alignment of the pointer with the panel markings
• Helps resolve "won't stay on a setting" complaints caused by a stripped insert

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Pull the old knob straight off; transfer any adapter or clip if present
• Align the flat/spline opening with the shaft and press straight on—do not force
• The pointer lines up with the panel and test operation

This replacement control knob restores a secure grip and positive feel when selecting settings on your appliance. It attaches to the control shaft so you can smoothly turn and set functions without slipping or wobbling.

• Engages the control shaft to adjust settings such as temperature, time, or function
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like spinning freely, falling off, or hard-to-turn controls
• Maintains accurate selection and a clean, finished look

• Disconnect power (and gas, if applicable) before servicing
• Pull the old knob straight off; inspect the control shaft for damage or wear
• Align the new knob with the shaft orientation (flat or D-shape as applicable) and press on until fully seated

The Knob Valve is an OEM part compatible with GE ranges. Precisely machined brass components regulate propane or natural gas flow through each control valve.

Causes of failure are often normal wear on precision valve internals restricting fuel intake over thousands of adjustment cycles. Cracks or contaminant buildup can occur from prolonged use.

Symptoms include:

• Burners failing to ignite consistently or at all  
• Inability to adjust/maintain proper flame height or temperature
• Fuel leaks discernible by smell around knob shafts

This GE replacement returns full functionality to fuel delivery. Compatible with select Hotpoint and RCA appliances as well, it prevents future repair costs.