Wall Oven Knob, Dial & Button

Color: Black. Measures about 2 inches in diameter. For biscuit use WP98008208. For white use WP98006102. Sold individually.

Color: Black   power burner knob

A replacement control knob for compatible Frigidaire-made ranges and cooktops. It restores a secure, readable control so you can set burner or oven settings reliably when the original knob is worn, cracked, stripped, or missing.

• Attaches to the control valve or switch shaft to select heat and temperature settings
• Replaces cracked, loose, or missing knobs that slip, wobble, or fall off
• Restores proper alignment with the control panel markings
• Common symptoms: knob spins without engaging, broken insert, hard-to-turn or misaligned control

• Unplug the appliance; for gas units, also shut off the gas supply
• Pull the old knob straight off the control shaft—do not pry sideways
• Align the flat/keyed side of the new knob with the shaft and press on firmly until fully seated
• Verify smooth rotation and correct pointer alignment before use

This control knob replaces a worn or broken knob on your range or cooktop, restoring smooth, accurate control of the burner. It fits onto the valve stem so you can select heat settings with proper alignment and feel.

• Turns the burner valve stem to choose OFF/LOW/HIGH and intermediate settings
• Replaces cracked, stripped, loose, or missing knobs
• Restores proper alignment and positive engagement when turning
• Symptoms include wobbling, spinning without engaging, or difficulty adjusting heat

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off the valve stem; align the new knob with the stem flat and press straight on until fully seated
• Do not pry on or twist the valve stem; avoid using tools on the stem
• After installation, verify the knob points to OFF correctly and engages each setting

Color: white. Measures about 2 inches in diameter.

Gas valve burner control knob. Color: Black. Measures about 2 inches in diameter. For white order WP74011408.

This control knob installs on the control stem so you can select settings on your appliance. Replacing a cracked or missing knob restores smooth, accurate control and a clean, finished look.

• Attaches to the control stem to operate the underlying switch or valve
• Lets you choose temperature, burner, cycle, or function as designed
• Common symptoms: cracked or stripped hub, knob falls off, spins without engaging
• Restores proper feel, positive engagement, and clear position indication

• Disconnect power; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press on until fully seated
• If present, transfer any reusable insert/clip from the old knob; replace the control if the stem is damaged

This thermostat knob fits onto the oven's temperature control shaft so you can select and read the cooking temperature. Replacing a cracked or missing knob restores smooth adjustment and a clean, factory look on the control panel.

• Interfaces with the oven thermostat to set cooking temperature
• Pointer aligns with panel markings for clear, repeatable selection
• Common reasons to replace: cracked hub, stripped insert, missing or loose knob
• Symptoms include wobbling, slipping, not staying on, or unreadable markings

• Disconnect power and allow the oven to cool before servicing
• Pull the old knob straight off the thermostat shaft
• Align the new knob with the shaft and press firmly until fully seated
• Check pointer alignment with the panel markings after installation

Color: Black   simmer knob.

This replacement surface burner control knob attaches to the valve stem on a gas range or cooktop, letting you select and adjust flame levels. Replacing a worn or missing knob restores positive feel and accurate control of your burners.

• Mounts to the burner valve stem to turn from OFF to LITE/HI/LO and regulate flame height
• Restores proper control when the original knob is cracked, stripped, loose, or missing
• May help when the knob spins without moving the valve or won't stay on the stem
• Helps ensure consistent heat settings for cooking

• Ensure all burner controls are OFF and the appliance is cool before starting
• Pull the old knob straight off the valve stem; avoid prying or twisting sideways
• Align the new knob with the OFF position and press straight on until fully seated
• If the knob won't seat securely, inspect the valve stem for wear or damage

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. It restores a secure fit on the control stem and smooth turning for accurate adjustments.

• Interfaces with the control stem to set temperatures, cycles, or power levels
• Replaces cracked, stripped, loose, or missing knobs that wobble or won't stay on
• Helps restore smooth turning and a firm, accurate feel
• Common symptoms: knob broken, spins freely, hard to turn, or falls off

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying sideways
• Align the new knob with the stem shape and press until fully seated; if your design uses a set screw, tighten gently
• If the knob won't fit or stay on, inspect the control stem for damage

This replacement control knob restores smooth, reliable operation of a range surface burner. It mounts on the valve stem so you can turn the burner on/off and select heat levels with a secure grip. What it does:

• Attaches to the burner valve stem to control flame/heat
• Replaces knobs that are cracked, stripped, wobbly, or missing
• Helps prevent slipping or free-spinning on the stem
• Common symptoms: knob won't turn, falls off, or is melted/damaged

• Includes 1 knob assembly

• Turn all burners off, allow the surface to cool, and disconnect power before beginning
• Pull the old knob straight off the stem; no tools are usually required
• Align the flat side of the stem with the new knob and press firmly until seated
• If it won't seat, stop and inspect the stem for damage or misalignment

Color: black. Measures about 2 inches in diameter.

Color: White

This genuine replacement control knob attaches to the control shaft on your appliance so you can turn and set functions as intended. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, factory look.

• Couples to the control stem to select settings and adjust levels
• Restores proper grip and turning action when the original is worn or broken
• Common symptoms it can address: knob cracked or missing, loose or slipping, won't turn the control, stripped insert
• Note: If the underlying control stem/shaft is damaged, additional parts may be required

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the stem; avoid prying that could damage the shaft
• Align the new knob with the flat/indicator on the stem and press firmly into place
• Verify smooth operation and correct pointer alignment before use

This replacement control knob restores easy, accurate selection of settings when your original is cracked, stripped, or missing. It attaches to the control shaft so you can adjust temperatures and functions as intended.

• Attaches to the control shaft to adjust heat, time, or function settings
• Replaces knobs that are cracked, loose, missing, or spin without engaging
• Helps when settings are hard to select or the indicator no longer lines up
• Restores a secure grip and consistent feel during operation

• Disconnect power before servicing; also shut off the gas supply
• Remove the old knob; if a set screw is present on your model, loosen it before pulling off
• Align the new knob with the shaft and press firmly until fully seated
• Verify smooth operation and correct indicator alignment after installation