Wall Oven Knob, Dial & Button

Color: Black

The Surface Element Knob is an OEM part compatible with Whirlpool ranges. It is designed to provide a secure and convenient grip for controlling the surface elements on your range.  

A bad surface element knob can occur due to regular use, accidental damage, or wear and tear. If you notice issues such as a loose or broken knob, difficulty in turning or adjusting the surface element, or the knob not staying securely in place, it may indicate a problem with the surface element knob.

Symptoms of a bad surface element knob include:

• Difficulty in turning or adjusting the surface element
• Loose or wobbly knob
• Inability to control the temperature of the element

Replace your faulty surface element knob with this genuine OEM part to restore your range.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Knob is an OEM part for GE appliances designed for use with various stove and oven models. This knob allows users to control the settings of their appliance, whether adjusting the temperature of the oven or setting the heat level on the stove. 

Symptoms of a bad knob include:

• Difficulty turning or adjusting the settings
• Knob slipping or failing to engage with the control mechanism
•  Cracks or breakage that prevent proper function

Causes of knob deterioration often include mechanical stress from frequent use, exposure to heat, or damage from cleaning products or impacts.

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Color: White. For biscuit use WP8522567, for black use WP8522566.

A replacement black control knob that restores a readable, grippable interface for appliance controls so you can select settings confidently. Designed as a direct-fit control knob for compatible Frigidaire appliances. What it does:

• Replaces a broken, cracked, missing, or worn control knob to restore tactile control.
• Provides a clear grip and alignment for selecting heat, cycle, or power settings.
• Helps stop slipping or spinning that prevents accurate setting selection.
• Matches the OEM shape and spline pattern for a secure fit when correct shaft is intact.

• Disconnect power to the appliance before servicing to reduce shock risk.
• Most replacements push onto the splined control shaft; align flat sides or spline grooves and press firmly.
• If the knob does not seat, inspect the control shaft and any retained adapter; do not force the part onto a damaged shaft.

This replacement control knob restores smooth, precise control when the original becomes cracked, stripped, or missing. It attaches to the control shaft so you can select settings with a secure, positive feel. What it does:

• Attaches to the control stem to operate the switch, valve, or timer
• Lets you select cycles, temperatures, times, or burner levels
• Restores proper engagement when the old knob spins freely or won't grip the shaft
• Common symptoms: cracked or missing knob, falls off, hard to adjust, won't change settings

• 1 control knob

• Disconnect power; for gas appliances, also shut off gas before servicing
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the stem (match flat/D orientation) and press firmly until seated
• Rotate through settings to ensure smooth operation

Color: White

This thermostat control knob replaces a worn or missing oven temperature selector. It attaches to the thermostat shaft so you can set the oven temperature again with a solid, positive feel and clear pointer alignment.

• Mounts on the thermostat shaft to select and adjust oven temperature settings
• Restores grip and control when the original knob is cracked, stripped, loose, or missing
• Helps ensure the control turns smoothly and the pointer lines up with the dial markings
• Freshens the appearance of the control panel

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off; avoid bending the control shaft
• Align the flat/D-shaped opening with the shaft and press on firmly until fully seated
• Rotate through the full range to ensure smooth operation

This control knob replaces a worn or missing knob on your range or cooktop, allowing you to select heat and function settings smoothly again. Restore precise control and a clean, finished look with a direct-fit replacement.

• Attaches to the control shaft of a valve or switch to select burner/heat settings
• Restores smooth, positive engagement if the old knob is cracked, stripped, or loose
• Helps resolve issues like slipping, wobbling, or difficulty turning settings
• Ideal when the original knob is missing or its markings are no longer readable

• Disconnect power at the breaker and shut off gas before servicing
• Pull the old knob straight off; avoid prying against the control panel
• Align the new knob with the stem orientation (set stem to Off if keyed) and press on firmly
• Verify smooth operation through all settings after installation

Color: Black. Measures about 2 inches in diameter. Other colors: For white use WP9750372FW, for biscuit use WP9750372FC.

The Knob Set is an OEM part for Bosch cooktops. This set includes four burner knobs designed to control the heat settings of your cooktop burners. The knobs allow you to easily identify and adjust the desired heat level for each burner.

A bad burner knob can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty knob include cracks, loose or wobbly fit, or difficulty in turning the knob smoothly.

Symptoms of a bad knob include:

• Cracks or visible damage 
• Loose or wobbly fit 
• Difficulty in turning the knob 

Replace your worn-out or damaged knobs with this genuine OEM Bosch part to restore your cooktop. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Color: White.

This replacement surface burner control knob restores smooth, accurate control of your range or cooktop. Replace cracked, stripped, or missing knobs so you can reliably turn burners on/off and adjust heat to the desired setting.

• Attaches to the valve or switch shaft to power the surface burner on/off and set the heat level
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores proper indexing so Off/Low/High markings align correctly
• Common symptoms include a knob that spins freely, wobbles, falls off, or won't engage the stem

• Allow all cooking surfaces to cool and turn controls off; disconnect power if servicing near internal controls
• Pull the old knob straight off the stem—avoid prying tools that could damage surrounding trim
• Align the new knob with the shaft (match the flat/D-shape) and press straight on until fully seated

The Knob Bezel is an OEM part for Whirlpool ranges and cooktops. It serves as the decorative and functional trim piece around the control knobs, helping to protect the appliance's surface and providing a clear indication of knob positions.

You should replace this knob bezel if it becomes damaged or worn out. Causes of a bad knob bezel include wear and tear from frequent use, exposure to cleaning chemicals, or accidental impact that causes cracking or discoloration. Keeping the knob bezel in good condition ensures easy operation and a neat appearance of the control panel.

Symptoms of a bad knob bezel include:

• Cracks or breaks in the bezel
• Discoloration or fading of markings
• Loose or unstable knobs
• Difficulty in accurately adjusting the controls

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black. Measures about 2 inches in diameter.

This replacement control knob restores a secure, accurate feel when setting temperatures on your cooktop or range. Swap out a worn or broken knob to regain smooth, dependable control of your appliance's settings. What it does:

• Attaches to the valve or switch stem to select Off and heat levels
• Restores positive grip and precise adjustment when turning the control
• Common symptoms: cracked or stripped knob, wobbling/loose feel, missing knob, difficulty adjusting heat
• Helps ensure consistent, repeatable burner control

• One control knob

• Disconnect power; shut off gas supply before servicing
• Pull the old knob straight off the stem—do not pry against the control panel
• Align the flat/D-shaped opening with the stem and press the new knob on fully in the Off position
• Test for smooth rotation and proper engagement