Wall Oven Knob, Dial & Button

Replacement bezel that fits around a control knob to restore a clean appearance and secure knob fit. Helps reduce knob wobble and protects the control shaft from dirt and spills for reliable knob operation. What it does:

• Covers the control shaft and provides a finished look to the knob area.
• Restores a snug, centered fit when the original bezel is cracked, worn, or missing.
• Reduces knob wobble and play that can affect control feel.
• Helps keep debris and liquids away from the control shaft to prevent interference.

• Disconnect power (unplug appliance or shut off circuit) before removing or replacing knobs.
• Remove the control knob, then pry or unclip the old bezel from the panel; install new bezel by aligning and snapping into place.
• Inspect for broken clips or mounting points; replace any damaged fasteners to ensure a secure fit.

The Top Burner Control Knob is an OEM replacement part designed for Whirlpool gas ranges and cooktops. It regulates the intensity of the flame on the gas burners. The knob connects to the burner control valve.

Over time, control knobs may degrade due to repeated use, heat exposure, or accidental impact. Such wear can lead to malfunctioning knobs that affect the ability to adjust the burner flame properly.

Color: Black

Symptoms of a faulty burner control knob include:

• Difficulty turning or adjusting the knob
• The knob spinning freely without adjusting the burner flame
• Cracks, warping, or stripped knob shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement infinite-switch control knob that restores reliable heat selection on electric cooktops and ranges. Push-on design lets you set burner heat levels precisely and replaces cracked, faded, or missing knobs. What it does:

• Turns the infinite switch to select burner heat level and set cooking temperatures.
• Restores a secure grip and tactile detents when the original knob is cracked, worn, or missing.
• Helps when a knob spins, slips, or won't stay set on a chosen heat setting.
• Works with push-on style infinite switch shafts commonly used on electric ranges and cooktops.

• Always disconnect power to the appliance before servicing to avoid shock or injury.
• Typically installs by pulling the old knob straight off the control shaft and pushing the new knob onto the shaft until seated.
• Inspect the switch shaft for wear or damage; a stripped shaft may require replacing the infinite switch rather than the knob.
• If the knob is tight to remove, use a firm, even pull or a suitable knob-puller tool; avoid excessive prying that could damage the control panel.

Color: White

This white valve knob replaces a worn, cracked or missing control knob so you can safely and easily adjust burner or oven settings. It restores a secure grip and precise control for temperature or flame adjustments. What it does:

• Replaces a damaged or stripped control knob used to turn gas or electric valve controls
• Provides a positive grip so settings can be changed smoothly and accurately
• Helps stop slipping or spinning that prevents proper temperature or flame adjustment
• Matches original fit to engage the control shaft properly when installed

• Turn off power and gas supply before removing the old knob
• Pull off the old knob straight from the control shaft; align splines and push new knob fully onto the shaft
• Do not force or hammer the knob; ensure it seats squarely to avoid damage
• Test control operation after installation and restore power/gas only when connection is secure

Color: black. Measures about 2 inches in diameter, by 2 inches deep.

Color: White/chrome

This is a replacement control knob that restores safe, easy control of a cooktop or oven function. It provides a secure grip and clear position indication so you can set heat or cycle settings precisely. What it does:

• Fits over the control shaft to allow turning temperature/settings without touching the control stem
• Replaces cracked, stripped, missing, or hard-to-turn knobs
• Restores clear detent positions for accurate setting selection
• Helps prevent accidental changes by seating securely on the shaft

• Before servicing, disconnect power to the appliance and shut off gas supply if applicable
• Pull old knob straight off the control shaft; align replacement onto the shaft and push until fully seated
• Do not use excessive force; inspect the control stem for damage before installation

Color: black. Measures about 2-1/2 inches in diameter.

This replacement control knob lets you select settings and operate the control smoothly again. It installs on the control shaft and restores a clean look and positive feel when the original knob is cracked, stripped, or missing.

• Mounts on the appliance's control shaft to turn the valve or switch
• Allows accurate selection of heat or function settings
• Replaces knobs that are cracked, loose, missing, or stripped and won't turn properly
• Helps ensure the pointer aligns correctly with OFF and selected settings

• Make sure all controls are OFF and the appliance is cool before starting
• Pull the old knob straight off the shaft
• Align the new knob with the shaft's flat/keyed side and press straight on until fully seated
• Verify smooth rotation and correct OFF alignment before use

Replacement control knob that restores user control of the appliance's front-panel settings. It provides a positive grip for selecting cycles, temperatures, or timers so you can operate the appliance safely and accurately. What it does

• Turns the control shaft to select cycles, temperatures, or timer settings.
• Replaces cracked, stripped, loose, or missing knobs that are hard to grip or won't turn.
• Restores tactile feedback for reliable selection of settings.

• Most installs are straightforward—align the knob splines with the control shaft and press until fully seated; some models may use a retaining clip.
• Always disconnect power to the appliance before servicing controls to avoid shock or injury.
• Inspect the control shaft and retaining clip for damage; replace damaged components before installing the new knob.

The Bezel and Knob is an OEM replacement compatible with Whirlpool cooktops. The control display cover at the front of the cooktop protects digital interfaces while adding a polished aesthetic. 

The bezel frames knob assemblies that enable precise temperature and setting adjustments during cooking. Causes for replacement include cracked or faded plastic from extended use over high heat sources.  

Symptoms of a failing bezel and knob include:

• Unsightly appearance damage detracting from the resale value
• The potential of food debris or liquid underneath if integrity is compromised

This OEM replacement part is compatible with select KitchenAid and Jenn-Air as well.

The Knob is an OEM part for Whirlpool electric ranges. It provides a comfortable grip and smooth rotation, allowing you to accurately adjust the heat levels for your cooking needs.

A bad knob can occur due to various reasons, such as regular wear and tear, accidental damage, or exposure to high heat. If you notice symptoms such as a loose or wobbly knob, difficulty in turning or adjusting the temperature, or a cracked or broken knob, it may be time to replace it.

Symptoms of a bad electric range knob include:

• Loose or wobbly knob
• Difficulty in turning or adjusting the temperature
• Cracked or broken knob

Restore the function and appearance of your Whirlpool electric range by replacing the worn-out or damaged knob with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

A replacement control knob that restores safe, positive control of a stove or range surface burner. This easy-to-install knob gives a solid grip for selecting heat settings and replaces a missing, worn or broken knob. What it does

• Fits over the range control shaft to select surface burner heat settings
• Provides a secure grip for smooth turning and accurate selection
• Replaces cracked, stripped, loose or missing knobs that prevent normal operation
• Helps restore proper detents/stops so settings hold when selected

• Turn controls to OFF and disconnect power (or shut off gas) before replacing the knob
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft
• Do not force a knob onto a damaged or bent shaft—inspect the control shaft for damage first

This control knob replaces a worn, cracked, or stripped stove/oven control interface to restore positive grip and accurate setting selection. It gives a simple, direct replacement to get appliance controls turning smoothly again. What it does:

• Fits onto splined control shafts to allow safe, tactile selection of heat and cycle settings
• Replaces knobs that are loose, cracked, melted, or missing
• Prevents slipping and improves accuracy when changing settings
• Restores a secure, ergonomic surface for manual control

• Disconnect power to the appliance before removing or installing the knob
• Pull the old knob straight off the control shaft; align the splines and push the new knob on until fully seated
• Do not force or hammer the knob onto the shaft; check fit and function before restoring power
• If the control shaft is damaged or the knob does not seat properly, replace the underlying control.

The Black Control Knob is an OEM part for Whirlpool gas and electric ranges. 

Causes of a bad control knob are often due to wear and tear over time making it difficult to turn accurately or stay securely in position. Excessive heat exposure can also damage knob labeling.

Symptoms of a bad control knob include: 

• Difficulty selecting desired burner settings or oven modes
• Loose fit that causes unintentional changes 
• Faded or illegible markings for burner/oven identification
• Cracked or broken knob base attachment area

This genuine Whirlpool replacement knob is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore range models.