Wall Oven Knob, Dial & Button

This is a replacement thermostat knob that restores safe, easy temperature selection on range and oven controls. The clear indicator and molded grip give reliable adjustment for everyday cooking and baking. What it does:

• Fits onto the thermostat/stove control shaft to set oven or burner temperature
• Replaces cracked, stripped, or missing knobs that are hard to turn or don't stay set
• Provides a visible pointer for accurate temperature selection
• Restores user control when the original knob is worn or damaged

• One black thermostat knob

• Turn power/gas to the appliance off and allow surfaces to cool before installing
• Pull the old knob straight off the control shaft
• Align the knob's splines with the control shaft and push on until fully seated

This replacement igniter knob is the user control that engages the spark igniter and gas valve on compatible gas ranges, restoring safe, reliable burner ignition and user control when the original knob is damaged or worn. What it does:

• Replaces a worn, cracked, or stripped igniter/control knob so you can easily turn burners on and off.
• Engages the burner spark mechanism when rotated or pressed (depending on range design).
• Helps ensure proper alignment with the range valve splines for predictable control response.
• Addresses symptoms like a loose, slipping, or broken knob that won't turn the burner valve or activate ignition.

• One replacement knob

• Disconnect power to the appliance and shut off the gas supply before attempting service.
• Ensure splines on the shaft and inside the knob are clean and undamaged; align knob to the shaft and slide fully onto the splines.
• Do not force the knob onto a damaged shaft; forcing can break the knob or valve stem.
• If the burner does not ignite after installation, the igniter or valve assembly may need inspection—this knob only replaces the user control.

This surface burner control knob restores smooth, precise heat selection on your cooktop or range. Replace a cracked, loose, or missing knob to regain clear settings and confident control with a clean, factory look.

• Attaches to the burner valve/infinite switch shaft to turn the surface burner on/off and adjust heat
• Resolves issues like slipping, wobbling, or a knob that won't turn or stay on the stem
• Helpful when indicator markings are worn or hard to read
• Returns the front panel to a clean, factory appearance with the correct fit

• Ensure all controls are off and the cooking surface is cool before starting
• Pull the old knob straight off the stem; do not pry against the panel
• Align the new knob with the stem and press firmly until fully seated
• Turn through all settings to verify smooth, accurate operation

This control knob replaces a damaged or missing knob on your range or cooktop. It mounts on the control shaft so you can select burner settings with a secure, accurate feel, finished in white to match the original. What it does:

• Provides hand control for burner/temperature selection by turning the valve or switch shaft
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores smooth rotation and proper alignment of settings
• Color: White to match original finish

• 1 control knob

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off the shaft; avoid prying or twisting sideways
• Align the new knob with the shaft and press straight on until fully seated
• Do not force; if the underlying valve/switch is damaged or binding, address that issue before installing the new knob

Color: White. Other colors: For black use WP9750372FF, for biscuit use WP9750372FC.

Color: Bisque

Color: Biscuit. For white use WP98006102. For black use WP98006100. Price per each. Order as needed.

Color: White. Measures about 2 inches in diameter.

Color: Stainless

This control knob replaces a worn, broken, or missing stove/oven knob to restore safe, reliable control and improve the appliance's appearance. It fits directly onto the control shaft for a secure, tactile grip. What it does

• Replaces a damaged or missing control knob so you can set burners or oven functions accurately
• Provides a solid grip and clear pointer for selecting settings
• Stops slipping or spinning caused by a cracked or worn knob
• Helps restore normal operation when the original knob is loose or won't stay engaged

• Disconnect power (unplug appliance or switch off breaker) before servicing to avoid electrical or burn hazards.
• Pull the old knob straight off the control shaft; no special tools typically required.
• Align the new knob's splines with the shaft and push straight on until fully seated.
• Do not force the knob; if it does not fit, check shaft shape and orientation before applying pressure.

This control knob restores a clean look and precise feel to your appliance's user controls. Replace a cracked, stripped, or missing knob to easily select settings again without slipping or wobbling.

• Attaches to the control shaft to operate a switch, thermostat, or valve.
• Provides a secure grip and clear pointer for setting selection.
• Replaces knobs that are loose, cracked, missing, or stripped and won't engage.
• Helps ensure the control turns smoothly to the desired position.

• Disconnect power to the appliance before servicing.
• Pull the old knob straight off the shaft; do not pry sideways.
• Align the new knob with the control shaft and push straight on until fully seated.
• If your original knob used a separate insert/clip, transfer it to the new knob if applicable.
• The pointer aligns with the panel markings and the control operates normally.

Color: Black

The Knob is an OEM part for Whirlpool ranges. As the interface between user and appliance, knobs allow for temperature and function control.  

Causes of bad knobs are typically normal wear over time, breakage from impact or over-tightening, or issues with the connecting shaft or gear assembly.

Symptoms of faulty knobs can include:

• Loose, wobbly or difficult to turn motions
• Knobs detached completely from shafts
• Knobs stuck or unable to fully rotate through settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement control knob restores a secure grip and accurate selection of settings on your appliance's control shaft. Swap a cracked, stripped, or missing knob to keep everyday operation smooth, precise, and safe.

• Attaches to the control shaft to select temperature, cycle, or burner settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, difficulty turning, or inability to choose a setting
• Restores normal feel and alignment when turning the control

• Unplug the appliance and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; avoid prying on the stem
• Align the new knob with the shaft and press firmly until fully seated
• Test operation to ensure smooth turning and proper engagement

This replacement top burner knob restores smooth, reliable control of your cooktop or range surface burner. Use it to turn the burner on/off and adjust heat when the original knob is cracked, stripped, or missing.

• Mounts on the burner valve or switch stem to control flame/heat level
• Replaces knobs that are broken, loose, or no longer engage the stem
• Helps resolve issues like spinning freely, falling off, or hard-to-set heat
• Restores precise burner control and a clean, finished look

• Allow the appliance to cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; do not pry on the valve stem
• Align the new knob with the stem and press straight on until fully seated
• The knob markings match the correct burner position before use

Color: chrome. Measures about 2 inches in diameter.