Wall Oven Knob, Dial & Button

This white control knob restores a clean look and reliable feel to your range's user controls. Replace a cracked, stripped, or missing knob so you can confidently select heat and function settings at the control shaft. What it does:

• Attaches to the control shaft to select heat or function settings
• Provides a pointer that aligns with panel markings for accurate selection
• Restores smooth turning when the old knob is cracked, stripped, loose, melted, or missing
• Helps ensure on/off and level adjustments engage properly

• 1 white control knob

• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the flat/D orientation of the new knob with the shaft and press straight on until fully seated
• Disconnect power and, if applicable, shut off gas before servicing any controls behind the knob
• Match part numbers to the correct location

This thermostat knob is the front control dial that lets you set an appliance's temperature and restore easy, accurate temperature selection. It replaces a worn, cracked, or hard-to-turn knob so controls respond like new. What it does

• Provides a secure grip for turning the thermostat or temperature control
• Aligns with the control shaft to show and select temperature settings
• Fixes symptoms such as a loose, cracked, or stuck knob and difficulty changing temperature
• Restores tactile feedback and clear position indication when selecting settings

• Disconnect power or unplug the appliance and allow it to cool before servicing.
• Most knobs simply pull straight off the control shaft; align the indicator and push fully on until seated.
• If the knob uses a retaining clip or keyed shaft, match orientation before pressing on.

This replacement control knob restores a damaged or missing front control knob so you can safely and easily set heat and function positions. It matches OEM fit and appearance for straightforward swapping. What it does:

• Rotates to select temperature or function settings on the appliance control shaft.
• Replaces cracked, stripped, faded, or missing knobs that are hard to grip or won't turn.
• Provides a tactile stop and clear position indicator for accurate selection.
• Helps restore normal control operation when the original knob has cosmetic or mechanical wear.

• One control knob.

• Turn power or gas supply off before servicing to avoid electrical shock or injury.
• Most knobs simply pull straight off the shaft and press firmly onto the replacement; align the spline or flat on the shaft with the matching opening in the knob.
• Do not force the knob onto the shaft; if it does not seat smoothly, verify alignment.
• If the control shaft is damaged or loose, replace the control assembly per the manufacturer instructions.

This flush-style control knob fits onto the appliance's control shaft to select settings with a smooth, secure turn. Replace worn or missing knobs to restore reliable adjustment and a clean, factory look. What it does:

• Attaches to the control shaft to operate the underlying switch or valve
• Provides a secure grip for selecting and adjusting settings
• Restores control when the original knob is cracked, stripped, or missing
• Typical symptoms include a knob that spins freely, falls off, won't turn the control, or is visibly damaged

• 1 control knob

• Disconnect power (and shut off gas supply if applicable) before servicing
• Pull the old knob straight off the shaft—do not pry from the sides
• Align the new knob's opening with the control shaft and press straight on until fully seated
• Restore power and test for smooth, proper operation

Color: Stainless

This is a set of eight replacement control knobs designed to restore function and appearance to compatible Whirlpool appliances. The kit gives you matching knobs to operate controls and replace cracked, faded, or missing pieces. What it does:

• Replaces worn, cracked, or missing control knobs so you can reliably set cycles, temperatures, or power levels
• Restores a uniform look across the appliance control panel
• Provides a direct-fit replacement for appliances that use the 8-knob kit
• Helps improve grip and control when turning settings

• Remove old knobs by pulling straight off the splined shaft; align new knob spline and push onto the shaft until fully seated
• No special tools typically required; use gentle force to avoid damaging the shaft
• If knobs control electrical functions, ensure appliance controls are off before replacing; disconnect power or gas if advised by the appliance manual

This replacement control knob lets you safely set and adjust your appliance's temperature or function with a secure, easy-to-grip interface. It restores a missing, cracked, or stripped control knob so you can operate the appliance normally. What it does

• Provides a direct user interface to turn and set temperature, burner, or cycle controls.
• Replaces knobs that are cracked, faded, loose, stripped, or missing.
• Restores positive engagement with the control shaft so settings stay in place.
• Simple push-on design.

• Turn the appliance off and ensure controls are in the OFF position before installing.
• Align the knob with the splined control shaft and push firmly until fully seated; do not force.
• If the knob feels loose after installation, inspect the control shaft and knob splines for wear before use.

A direct-replacement control knob for range and oven front panels that restores safe and accurate control of temperature or function settings. Simple to swap and designed for straightforward push-on installation. What it does

• Replaces a worn, broken, missing, or stripped range/oven control knob
• Provides a secure grip for setting temperature, bake, broil, or burner/select functions
• Helps prevent accidental setting changes from loose or damaged knobs
• Fits splined/shaft-style controls commonly used on many Whirlpool-style ranges and ovens

• One control knob

• Turn appliance controls off and ensure surface is cool before installing
• Remove the old knob by pulling straight off the control shaft; align splines and push the new knob onto the shaft until seated
• Do not force; if knob does not slide on easily, verify shaft type and orientation

The Thermostat Knob is an OEM part for GE ranges. This control knob sets the oven's internal temperature. 

Symptoms of a bad thermostat knob include:

• Failure to maintain or achieve proper cooking temperatures  
• Loose, unstable or warped knob housing 
• Faded or damaged temperature markings
• Inconsistent baking and roasting results

Causes can be normal wear over time from heat exposure cycle after cycle. The internal components and external knob materials degrade with use.

This GE part is compatible with Hotpoint, RCA, and Kenmore models as well.

This replacement burner control knob restores a worn or damaged stove/range control so you can set heat levels precisely. Durable black finish matches OEM appearance and provides a secure grip for safe burner adjustments. What it does:

• Replaces a broken, cracked, or stripped burner control knob so the control shaft can be turned smoothly
• Fits short-shaft control stems; engages the splines to set burner heat from low to high
• Helps stop slipping or accidental setting changes caused by worn knobs
• Common symptom fix: knob won't stay on, won't turn, or spins without engaging the control

• Before installing, disconnect power to the appliance and shut off gas supply if applicable
• Align the knob splines with the control stem and push firmly until seated; do not force or hammer
• Wear gloves to avoid cuts on sharp edges and test operation after installation

A replacement surface switch knob that restores reliable control of a cooktop or range surface switch. Fits on the switch shaft to give a secure grip for setting and adjusting burner controls. What it does:

• Replaces cracked, faded, loose, or missing surface switch knobs so you can accurately select burner settings.
• Provides a secure, easy-to-grip control for turning surface element switches.
• Interfaces with the range's surface switch shaft to restore normal knob operation.
• Helps prevent accidental slips or mis-settings caused by damaged knobs.

• Always disconnect power (unplug the range or turn off the breaker) before servicing controls.
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the shaft until fully seated.
• If the old knob is difficult to remove, rock it gently back and forth—avoid excessive force or pry tools.

Color: Biscuit. Other colors: For black use WP9750372FF, for white use WP9750372FW.

This metal gas control knob replaces a damaged or worn stove/range knob to restore a secure grip and reliable control over burner settings. Easy to use and styled to match original factory controls. What it does:

• Allows safe selection of gas burner heat settings by turning the valve shaft
• Restores a firm, non-slip surface when an existing knob is cracked, stripped, or loose
• Helps resolve issues where the knob won't turn or won't stay set at the chosen flame level
• Matches original fit and feel for straightforward operation

• Turn off the appliance and shut off gas supply before servicing
• Typically installs by aligning on the valve shaft and pushing into place; no special tools required
• If knob does not seat correctly, check shaft for debris or a damaged splined insert

This replacement control knob fits stove and oven front panels and restores reliable control of temperature and burner settings. It provides a secure, slip-resistant grip so you can turn settings with confidence. What it does

• Replaces a cracked, stripped, or missing control knob to restore user control
• Slides onto the control shaft for simple push-on operation
• Helps prevent accidental setting changes with a snug fit
• Visible index marker lets you clearly see selected settings

• One control knob

• Typically installs by pulling the old knob straight off the valve or shaft and pushing the new knob into place
• Disconnect power to the appliance or turn controls off before servicing for safety
• If the knob does not seat properly, do not force it—inspect the shaft for damage or debris

This replacement control knob restores a range or cooktop's user control, making it easy to set or change heat and function settings. Simple to install, it refreshes worn or broken knobs so you can operate controls safely and accurately. What it does

• Provides a firm, easy-to-grip control for adjusting temperature and function settings
• Replaces cracked, stripped, or missing knobs that slip or won't turn
• Restores clear pointer alignment so settings register correctly
• Helps prevent accidental changes by fitting securely on the control shaft

• Disconnect power to the appliance before servicing for safety
• Pull the old knob straight off the control shaft; some models may require loosening a set screw
• Align the new knob's splines or hub with the control shaft and press firmly until seated
• Test control operation after installation; stop if it resists or binds

This control knob replaces a worn, broken or missing range/stove control knob to restore safe, simple temperature and function selection. It provides a direct fit and the tactile stop-and-click feel users expect from factory knobs. What it does:

• Replaces a damaged or stripped control knob so the burner or oven settings can be selected accurately.
• Restores grip and rotation for reliable on/off and temperature selection.
• Helps eliminate slipping or poor engagement between the shaft and knob.
• Fits original control shafts to maintain intended control detents and positioning.

• Turn power and gas off before servicing controls; follow appliance manufacturer safety instructions.
• Pull old knob straight off the control shaft; align new knob on the splines and press firmly until seated.
• If knob does not fully seat or rotates loosely, confirm shaft type and knob orientation before forcing.