Wall Oven Knob, Dial & Button

The Bushing is an OEM replacement part for Whirlpool wall ovens. This component acts as a sleeve to reduce friction and ensure smooth movement in various mechanical parts of the oven, such as door hinges or rotating elements. Properly functioning bushings help maintain the alignment and durability of these parts over time.

Causes of a bad Bushing can include wear and tear from repeated use, lack of lubrication leading to increased friction, or damage caused by misalignment or heavy loads. A failing bushing can lead to inefficient operation or damage to connected components.

Symptoms of a bad Bushing include:

• Squeaking or grinding noises during oven door movement
• Difficulty opening or closing the oven door smoothly
• Misalignment of moving parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This knob kit replaces worn or broken range/cooktop control knobs, restoring a secure fit and clear control of your burner or oven settings while refreshing the appliance's factory look.

• Replaces damaged or missing control knobs for surface burners or oven controls
• Restores accurate selection of heat/flame and positive "Off" alignment
• Common symptoms: cracked or stripped knob, loose/slipping knob, faded/illegible indicators, knob falls off
• Press-fit design provides smooth operation when turning the control shaft

• Disconnect power or shut off gas and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying against the control panel
• Align the new knob with the stem orientation and press straight on until fully seated
• Match each knob to its original location and verify smooth operation

Color: chrome. Measures about 2 inches in diameter.

The Knob is an OEM part for Whirlpool ranges. Offers precise control over your temperature settings. This part is essential for the accurate operation of your range, allowing you to set and adjust cooking temperatures with ease.  

A common cause for the need to replace the oven knob can be attributed to physical damage or wear over time. With repeated use, knobs can become loose, making it hard to select the correct temperature settings.  

Symptoms of a bad Oven Knob include:

• Difficulty in turning the knob, which may feel stuck or overly tight
• The knob slipping or not catching onto the spindle, preventing accurate temperature adjustments
• Visible wear or damage, such as cracks or melting, which can occur from exposure to high temperatures or accidental impact

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Top Burner Control Knob is an OEM replacement part for Whirlpool cooktops and ranges. This knob provides a convenient way to control the heat level of the top burners, allowing for precise adjustments during cooking. It fits securely onto the control shaft, ensuring smooth operation and reliable functionality.

Symptoms of a bad Top Burner Control Knob include:

• The knob becoming loose or failing to turn the control shaft
• Difficulty adjusting the burner flame or heat level
• Visible damage, such as cracks or warping
• The knob falling off or not staying in place

Causes of a failing Top Burner Control Knob can include wear from frequent use, accidental impact, or exposure to high heat. Over time, the plastic or material may degrade, requiring replacement.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM part for Frigidaire ranges. It is located on the front control panel and facilitates setting the exact temperature or heat level for cooking. Each individual knob directly corresponds to a specific burner or oven function.

Causes stem from natural wear through frequent manual operation. Harsh cleaning chemicals or accidental impacts can also damage knob surfaces or mechanics over time.

Symptoms of a bad knob can include:

• Looseness making it difficult to turn 
• Becoming illegible with labels fading 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Surface Knob is an OEM part for Whirlpool ranges and cooktops. It allows users to control the heat level of the surface burners, providing precise adjustments for cooking. The knob fits securely onto the control valve stem, ensuring accurate and reliable operation.

Common causes of a bad surface knob include frequent use, physical damage from impacts, or exposure to high heat. A faulty knob can hinder your ability to control the burner accurately, affecting cooking performance.

Symptoms of a bad surface knob include:

• Difficulty turning the knob
• The knob not staying in place or slipping off
• Inaccurate heat control
• Visible cracks or damage to the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the replacement control knob for the cooktop's infinite switch. It lets you turn a surface element on/off and select heat levels, restoring normal operation and appearance when the original knob is cracked, stripped, or missing. What it does:

• Mounts on the infinite switch stem to control a surface element's power and setting
• Replaces cracked, broken, or missing knobs so the burner can be operated normally
• Helps correct loose, slipping, or spinning knobs that no longer grip the shaft
• Restores proper alignment of the pointer with the control panel markings

• 1 surface element control knob

• Turn off power at the breaker/unplug the range before working around controls
• Pull the old knob straight off the switch shaft; avoid prying with tools
• Align the flat/D-shaped side of the new knob with the shaft and press straight on until fully seated
• If it doesn't seat easily, re-align to avoid damaging the switch stem

The Burner Knob is an OEM part designed for Whirlpool ranges. It fits onto the burner control valve, allowing you to adjust the flame level and temperature while cooking.

Color: Black

Burner knobs can suffer damage or malfunction due to regular use, accidental impacts, or heat exposure over time. These conditions can cause the knob to crack, become loose, or stop rotating smoothly.

Symptoms of a faulty burner knob include:

• Difficulty adjusting the burner flame level
• Knob slipping or not turning smoothly
• Knob falling off or feeling loose
• Burner not responding accurately to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This surface burner control knob mounts on the valve stem and lets you turn the burner on/off and set flame level. Replace a cracked, stripped, or missing knob to restore smooth, precise control of your cooktop.

• Attaches to the burner valve shaft to regulate gas flow and flame size
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores proper pointer alignment with the control markings
• Common symptoms: knob wobbles, slips, or falls off during use

• Disconnect power and allow the cooktop to cool completely
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the flat/D shape of the stem and press the new knob straight on until fully seated
• If the control remains hard to turn or feels loose, inspect/service the valve before use

The Knob Asm Ss is an OEM part for GE cooktops. The stainless steel knob assembly controls the oven or range functions through an easy-to-use dial interface. 

Causes of a bad knob assembly include normal wear and tear, excessive force or impact damage, or breakdown of the electronic components connected to the control functions. 

Symptoms of a bad knob assembly include:

• Difficulty turning or moving the knob 
• Knob movement not corresponding to temperature or function changes
• The knob partially or completely disengaged from the oven or range
• Inability to select cooking modes or temperature settings

This genuine GE OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

Jenn-Air cooktop surface burner knob. Color: Black. This knob measures about 2 inches in diameter.

This control knob barrel is the inner sleeve that connects the knob to the control shaft. Replacing a worn or cracked barrel restores a snug fit so the knob turns the switch or valve reliably without slipping.

• Couples the knob to a D-shaped or splined control shaft
• Restores positive engagement for smooth, accurate adjustments
• Replaces a stripped, cracked, or missing inner sleeve
• Common symptoms: loose or wobbly knob, knob spins without changing settings, or falls off

• Disconnect power; for gas appliances, shut off gas supply
• Pull the knob straight off; remove the damaged barrel from the knob
• Align the new barrel with the shaft shape and press it fully into the knob
• Push the knob back onto the shaft until seated; verify proper operation

The knob is an OEM part for Whirlpool ranges. It provides an accessible interface for temperature and function selection via an easy to grip design. The knob allows for setting of temperature for the surface elements.

Causes of a bad knob can include wear and tear over time, exposure to excessive heat warping the surface, or accidental damage compromising integrity.

Symptoms of a bad knob include:

• Looseness, wobble or inability to secure firmly on the stem
• Faded or illegible markings limiting functionality
• Cracks or breaks that could be a hand safety hazard

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: glossy black. It measures about 2 inches diameter.

This is a control knob that is used on ranges and stoves. The control knob is used to turn the burner on and adjust heat. Sometimes, the knobs can be damaged or come off and be lost. In some cases, the knob can also become loose on the base and hard to use.The process of replacing the control knob is simple and requires no tools. First, make sure the stove is turned off and is cool to the touch. Locate the knob that is broken or damaged and pull it away from its base. If it is stuck, a screwdriver can be used to pry it up. Place the new control knob on the base and press it in to secure it.This control knob is designed to be compatible with ovens, ranges, and stoves manufactured by Tappan, Frigidaire, and Crosley. It is sold as an individual item. This is a genuine OEM replacement part that is sourced directly from the manufacturer.