White Westinghouse Washer Dryer Combo Blower Wheel Or Fan Blade
Genuine Frigidaire part
By: Frigidaire
Part Number: 131476300
The Blower Wheel is an OEM part for Frigidaire clothes dryers. This component works to propel hot air through clothes during drying cycles.
Causes of a bad blower wheel involve wear from years of operation, such as bearing deterioration or plastic fan blade cracking/warping. Foreign object damage or improper cleaning techniques pose other risk factors.
Symptoms of a bad blower wheel include:
- Slow or weak drying even on high heat settings
- Loud clanking or grinding noises from inside the duct
- The dryer not activating or functioning when turned on
- Reduced air discharge observable at the vent
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Fan making banging sound in housing Keith N. • Kaukauna , WI • April 25, 2015
The blower wheel center was worn down and spinning freely on shaft. Removing front covers, controls and brackets gave access to blower, which front half came off removing screws. (One screw underneath bracket) Pushed new blower on. (It's keyed and has small tabs that line up with groove on shaft). Installed clamp, reassembled and tested. Don't forget to pull the plug out before working on any appliance.
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 137551800
This replacement housing is the body that holds the washer's detergent drawer and channels rinse water through each compartment into the tub. Replacing a cracked or warped housing restores proper dispensing and helps prevent leaks at the dispenser area.
- Supports and aligns the detergent/bleach/softener drawer
- Routes incoming water to flush each compartment into the wash tub
- Interfaces with inlet hoses and outlet chute for proper flow
- Common symptoms: water leaking from the dispenser/front panel, detergent or softener left in the drawer, poor dispensing, drawer difficult to open/close
What's included: One dispenser housing Install notes:
- Disconnect power and shut off water supply before servicing
- Remove necessary panels/trim, pull out the drawer, and release mounting screws/clips to access the housing
- Label and disconnect hoses; note routing. Transfer any reusable siphon caps, seals, and the drawer from the original housing
- Reassemble, restore water and power, and run a test fill to check for leaks
Do-It-Yourself Stories from Customers like You
At first i thought the drier motor had froze up so i ordered it from y'all but when i wastaking it apart i seen that the squirll wheel & the back half of the housing was damaged so i ordered those Craig B. • Bogalusa , LA • July 02, 2017
It was a lot of work, & I thank God that I'm able to do my own repairs. But for just a small amount of money, I didn't have to buy a new set, which is about $1300.
Read more
More
$78.95
- Compare At:
-
$94.74
- You Save:
-
$15.79
Finding the right White Westinghouse washer dryer combo Blower Wheel or Fan Blade replacement parts can make all the difference in keeping your appliance running smoothly. These parts are essential for ensuring your washer dryer combo operates efficiently, helping to maintain consistent airflow and prevent overheating. By focusing on reliable White Westinghouse parts, you invest in maintaining the longevity and performance of your appliance.
The blower wheel or fan blade plays a crucial role in circulating air through the dryer compartment, allowing clothes to dry evenly and quickly. Without a functioning blower wheel or fan blade, your washer dryer combo might struggle to perform its duty. Opting for OEM replacement parts ensures you get components that are designed to fit and function seamlessly with your White Westinghouse washer dryer combo, ensuring optimal performance and compatibility.
You can rest assured knowing that high-quality White Westinghouse washer dryer combo Blower Wheel or Fan Blade replacement parts are readily available. Investing in these parts not only restores functionality but also enhances the overall efficiency of your appliance, making laundry day a breeze. So, whether you're replacing a worn-out part or performing routine maintenance, you can confidently keep your washer dryer combo in top shape.
More