Whirlpool Washer Knob, Dial & Button

Replace your washer's timer dial if cracked, broken, or missing. Installs behind the knob with gray indicator to help select wash cycles correctly.

This knob attaches to the timer shaft on the washer control panel, allowing you to select wash cycle settings. It typically pushes or clips onto the timer stem. Replace this knob if it is cracked, the D-shaped shaft connection is worn out, or it spins freely without engaging the timer.

Timer knob assembly mounts to the control shaft for manual cycle selection. Replaces a cracked, worn, stripped, or missing knob on your laundry center.

This is a push button switch used to start and stop the wash cycle on a washing machine. It mounts on the control panel and engages the machine's control circuit when pressed. Replace this button if it feels loose, does not click properly, or the washer fails to start or stop when pressed.

This timer knob mounts on the appliance's mechanical timer shaft and lets you select cycles and settings. Replace a cracked or stripped knob to restore smooth, positive control of the timer and accurate cycle selection.

• Attaches to the timer shaft so you can set cycle and time
• Provides a secure grip for selecting and adjusting settings
• Common symptoms: knob spins without moving the timer, feels loose, cracked, or missing
• Helps restore proper engagement when the hub is worn or stripped

• Disconnect power before servicing
• Pull the old knob straight off the timer shaft
• Align the flat/splines of the new knob with the shaft and press on firmly
• Rotate through a full turn to confirm proper engagement

Replace a broken, cracked, or missing timer dial knob on your washer control panel. Restores clear cycle selection and manual timer adjustment.

The Knob is an OEM component for Whirlpool dryers. As the user interface, it allows selections of temperature, settings, and time options with the twist of a finger.

Designed for comfort during extended cycles, the durable knob utilizes non-slip textured surfaces around robust internal gears. Integrated fasteners mount securely to shafts coupling knobs to their respective switches. 

Causes of faulty knobs can include stripped internal teeth from mineral deposits binding moving parts or broken mounting tabs weakened through normal wear over many years.

Symptoms of a damaged knob include:

• Failure to engage settings or spin freely  
• Dials loose on shaft allowing accidental shifts   
• Missing labels from normal cleaning/wear reducing visibility
• Cracks or breaks compromising seal against moisture

Replace yours today with this genuine Whirlpool knob to restore easy navigation of cycles. Compatible with Kenmore and some Maytag dryers.

This knob assembly replaces the "modifier" control knob on the console so you can adjust settings smoothly and reliably again. Restore a secure, positive-turn feel when the original knob is cracked, stripped, or missing.

• Attaches to the control shaft to select and adjust options/settings
• Replaces knobs that are cracked, broken, or missing
• Fixes a knob that spins freely, slips, or won't turn the control
• Restores proper selection and tactile feedback during use

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel
• Align the flat/splines on the new knob with the shaft and press on firmly until fully seated
• The pointer aligns with the panel markings before use

This control knob assembly replaces a worn or broken selector knob so you can set and change appliance functions with a secure fit and clear detents. It restores reliable manual control for common user settings. What it does:

• Fits onto the control shaft to select cycles, temperatures, or settings depending on your model
• Provides tactile detents and a firm grip for accurate selection
• Resolves symptoms like a loose, cracked, or spinning knob that won't engage settings
• Prevents slipping or intermittent control inputs caused by a damaged knob

• Disconnect power (unplug or shut off breaker) before handling control parts
• Often installs by aligning onto the control shaft and pushing on until seated; some models may use a retaining clip or screw
• Handle gently to avoid damaging the control shaft or surrounding panel

The Control Knob is an OEM part for Whirlpool washers and dryers. It attaches to the selector switch, enabling users to choose various settings such as wash or drying temperature, fabric type, and spin speed.

The most common causes of a defective control knob include internal stripping that prevents secure engagement with the selector shaft, wear and tear from frequent use, accidental impacts leading to cracks or breakage, and aging of the knob's material.

Color: White

Symptoms of a malfunctioning control knob include:

• Difficulty selecting or changing cycle settings
• The knob spins freely without engaging the selector switch
• Cracks, looseness, or broken parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers and dryers.

This bisque-colored timer knob attaches to the timer shaft on the washer's control panel, allowing you to select wash cycles and settings. It includes the knob and any associated clip or skirt needed for installation. Replace this knob if it is cracked, broken, or if the dial no longer grips the timer shaft properly, making it difficult to turn or set the desired cycle.

A replacement control knob that restores reliable manual control of a dial or selector. Fits standard splined control shafts to make setting temperatures, cycles or power levels easy and intuitive. What it does

• Provides a secure grip and clear rotation for selecting settings on the appliance's control shaft
• Replaces cracked, worn or missing knobs that are hard to turn or won't stay in position
• Restores tactile feedback and alignment so settings register correctly with the control shaft
• Useful when original knob splines are stripped or the outer cap is damaged

• Typically installs by aligning splines and pushing firmly onto the control shaft until seated
• Power to the appliance should be turned off when removing and installing control parts
• Do not force the knob onto a shaft that does not match; verify spline match before installation
• If knob does not engage or control still fails, the underlying switch or shaft may need inspection

This kit contains two knobs and dial replacing many models. Color: black. The knobs are about 2 inches in diameter. The dial is about 3 inches in diameter.

This replacement control knob assembly restores a solid, accurate feel when selecting settings on your appliance. Replace cracked or stripped knobs to regain smooth control and a clean, like-new appearance.

• Interfaces with the control shaft so you can select functions and settings
• Common failure signs: cracked or broken knob, stripped insert, wobbly fit, falls off, hard to turn, or missing knob
• Restores proper grip and pointer alignment for accurate adjustments
• Direct replacement engineered to match the original fit and function

• Disconnect power and allow any hot surfaces to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying on the control panel
• Align the shaft/keyed flat with the new knob and press firmly until fully seated
• Verify smooth operation through the full range of settings

Restore smooth, accurate control with this replacement control knob. It fits onto the selector or timer shaft so you can choose cycles, temperatures, or time and replace a cracked, stripped, loose, or missing knob.

• Attaches to the control shaft to operate a switch, timer, or thermostat
• Provides a secure grip for selecting cycle, temperature, speed, or time
• Resolves issues like free-spinning, slipping, or knobs that won't stay on
• Helps when settings can't be adjusted due to a damaged or missing knob

• Disconnect power before servicing to prevent accidental start
• Pull the old knob straight off; avoid twisting the control shaft
• Align the new knob with the shaft and press firmly until fully seated
• If your original knob had a removable insert/retainer, transfer it to the new knob