Whirlpool Washer Support Parts

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines. They’re designed to help keep the washer balanced. If you’re washing machine is noisy, banging, or “walking”, it may be time to replace your suspension rods.

 Included in the kit:

• 4 suspension rods
• 4 bearings
• 4 bearing cups

The suspension rods in a washing machine can also experience failure for similar reasons as other parts. Overloading the washing machine is a frequent cause of suspension rod failure. The excess weight puts too much stress on the rods, causing them to bend or break. Constant use over time can lead to suspension rod failure as well. The repetitive motion can wear down the components and cause them to lose their structural integrity.

Replace your suspension rods and enjoy peaceful laundry time again! This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines, designed to provide support and stability to the washer drum. This kit includes four suspension rods that connect the washing machine drum to the frame, allowing for controlled movement and reducing vibration during the spin cycle. These rods play a critical role in absorbing the motion of the washer drum, ensuring smooth operation and preventing excessive noise or movement that could damage the machine or affect its performance.

Causes of these issues often stem from normal wear and tear, as the suspension rods can become worn out or damaged over time. Heavy or uneven loads can also put extra stress on the rods, leading to premature failure.

Symptoms of a bad part:

• Excessive noise or vibration during operation
• Shaking or movement of the washer
• Unevenly washed clothes or excessive wrinkles

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rods are OEM parts for Whirlpool washing machines. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.

Symptoms of bad Suspension Rods include:

• Unusual vibrations or shaking during the wash cycle.
• The washing machine "walking" or moving across the floor.
• Loud banging noises, especially during high-speed spins.
• The tub sagging or tilting more than usual when loaded.

Causes of bad suspension rods can include wear and tear from normal use, stress from unbalanced loads, or degradation of the material properties over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods designed to support the washing machine's tub assembly. By absorbing vibrations and stabilizing the tub during the spin cycle, these rods play a crucial role in reducing noise and preventing the washing machine from moving excessively. 

Causes of a bad Suspension Rod Kit can include normal wear and tear, overloading the washing machine, or frequent heavy cycles that put extra strain on the rods. 

Symptoms of a bad Suspension Rod Kit include:

• The washing machine is excessively noisy during the spin cycle.
• The tub seems unbalanced or moves more than usual, even with light loads.
• The washing machine "walks" or moves from its original position during operation.
• Unfinished cycles or error codes indicating an unbalanced load.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

• Excessive vibration or shaking during operation
• Loud banging or thumping noises during the spin cycle
• The washer moving or "walking" across the floor
• Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension is an OEM part for Whirlpool washing machines. This component includes a set of rods and springs that support the washer drum and help to minimize vibrations during the wash and spin cycles. The suspension system ensures that the drum remains balanced, which is crucial for smooth operation and effective cleaning. This kit comes with a set of 4 suspension rods, bearings, and bushings.

Causes of a bad suspension can include wear and tear from regular use, overloading the washer, or damage due to unbalanced loads. A faulty suspension can lead to excessive vibrations, noise, and potential damage to the washer's internal components.

Symptoms of a bad suspension include:

• Excessive shaking or vibrating during wash cycles
• Loud banging or thumping noises
• The washer moving or "walking" during operation
• The drum appearing to be off-balance or sagging

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

• Excessive shaking or vibrating during the wash or spin cycles
• Loud banging noises coming from the washer
• The washer moving or "walking" during operation
• Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods that support the washer tub and help absorb vibrations during the spin cycle. These rods ensure the tub remains balanced, providing smooth and quiet operation.

You should replace the suspension rods if they become worn or damaged. Over time, heavy loads, unbalanced loads, or general wear and tear can cause the rods to lose their ability to stabilize the tub effectively. This can lead to excessive vibrations and noise during the wash cycle.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or knocking noises
• Washer tub not staying centered
• Washer moving or walking during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Shock Absorber is an OEM part designed for Whirlpool washing machines. This part helps to dampen the motion of the tub during the spin cycle, reducing vibrations and noise. By absorbing the energy produced during operation, the shock absorber contributes to the stability and longevity of the machine. A well-functioning set of shock absorbers is essential for maintaining the washer's performance and preventing damage to other components.

Causes of a bad shock absorber can include wear and tear from regular use, excessive load sizes or unbalanced loads, and structural damage from moving or improper handling.

Symptoms of a bad Shock Absorber include:

• Increased vibration and noise during the spin cycle
• The washer moving or "walking" across the floor
• Unusual wear on other components due to excessive movement

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Shock Absorber is an OEM part for Whirlpool washing machines. This component is essential for reducing vibrations and stabilizing the washer drum during operation, particularly during the spin cycle. It helps to absorb shocks and minimize excessive movement, ensuring the washing machine runs smoothly and quietly.

Note: The unit requires a quantity of 4. Package includes 1 only; order as needed.

Symptoms of a failing Shock Absorber include:

• Excessive shaking or vibrating of the washing machine, especially during the spin cycle
• Loud banging or thumping noises during operation
• The washing machine moving or "walking" across the floor
• Visible damage or wear to the shock absorber

Causes of a bad shock absorber can include wear and tear from regular use, heavy or unbalanced loads that put extra strain on the absorbers, or physical damage from impacts or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Suspension Spring Kit is an OEM part for Whirlpool washing machines. This kit includes multiple springs that support the washer tub, helping to absorb shocks and reduce vibrations during the wash cycle, ensuring smooth and stable operation.

Causes of a bad suspension spring can include wear and tear over time, heavy loads, or unbalanced loads that put excessive strain on the springs. Damaged or worn springs can lead to increased movement and instability, affecting the washer’s performance and potentially causing damage to other components.

Symptoms of a bad suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• The washer tub appearing out of alignment or sagging
• Loud banging noises during operation
• The washer moving or "walking" across the floor

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods and springs, which are essential for supporting the washer tub and ensuring it remains balanced during operation. The suspension rods help absorb vibrations and reduce the movement of the tub, providing stability throughout the wash and spin cycles.

Causes of a bad suspension rod kit include wear and tear over time, heavy or unbalanced loads that strain the suspension system, or physical damage to the rods or springs.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Washer tub banging against the sides of the machine
• Unbalanced loads causing the washer to stop mid-cycle
• Loud noises during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes rods that connect the washing machine drum to the chassis, helping to absorb vibrations and prevent excessive movement during operation.

Causes of a bad Suspension Rod Kit can include deteriorating springs, worn mounts, or damage from excessive vibration over multiple cycles. 

Symptoms of a bad Suspension Rod Kit include:

• Unusual noises during the spin cycle, such as banging or thumping sounds.
• The washing machine drum appearing off-balance, especially during the spin cycle.
• Excessive vibration or "walking" of the machine during operation.
• Clothes coming out more wrinkled than usual due to an unsteady spin.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washers. This kit contains the suspension rods that connect the outer tub to the base of the washing machine, providing support and stability during the wash cycles. Each rod measures 23-1/4"L x 1-1/2" in diameter, designed to handle heavy loads.

Symptoms of worn or damaged suspension rods may include:

• Excessive vibration or shaking during spin cycles
• Loud banging or thumping noises
• Leaks due to increased stress on tub components
• The washing machine walking or moving excessively

Causes of suspension rod failure can include normal wear over time, impact or damage from overloading, or improper leveling and installation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.

Symptoms of worn or cracked shock absorber washers include:

• Noisy operation as the washer shakes or moves during cycles
• Physical signs of deterioration
• Over time, increased stresses can damage connected components

Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.  

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.