White Outdoor Parts

The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.

This is a replacement mulch cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached mulch cover on various lawnmower models. This mulch cover works to switch the lawn mower into mulching mode when attached to the grass-discharge chute. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this mulch cover, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this mulch cover is suitable for use on several different models of lawnmowers manufactured by MTD, Troy-Bilt, Craftsman and Cub Cadet. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

Carriage bolts are flat-tipped with round heads, and their function in small engine appliances is to fasten together components and to secure that connection with a nut. There are various reasons that a carriage bolt might have to be removed and replaced, among them misplacement of the small, easily lost part. Other reasons to replace a carriage bolt could include damage or erosion that prevents the bolt from attaching the materials to one another effectively. If a carriage bolt is subject to this kind of damage, it should be replaced before using the small engine appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This genuine MTD carriage bolt can be used as a replacement part for several different kinds of appliances that require small engines, including lawnmowers, snowblowers, wood-chippers, tillers, string trimmers, leaf blowers, and edgers. The OEM carriage bolt is compatible with the following brands: Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. This part is sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

A train shield is found on many walk-behind lawn mowers. It is located on the rear side of the lawn mower. The function from the position where it is mounted is to keep grass from expelling from the mower deck. With use or as a result of accidental impact, the train shield may become damaged or fall off. If the train shield is broken or missing, it will allow grass to come out from the mower deck, which poses a safety risk. Check to see if grass is being expelled from the motor deck.Installing a train shield on a lawn mower is an easy task. There is hardware required to secure the part in place. Wear gloves for protection. Make sure the machine is entirely cool.This train shield is a genuine OEM replacement part. It is sourced from the manufacturer. The train shield is made of durable, high-quality plastic. It is sold individually. The train shield can be installed on MTD, Troy-Bilt, Yard-Man, Bolens, Yard Machines, Cub Cadet, and Huskee brand lawn equipment. It is compatible with several models of walk-behind lawn mowers.

This replacement part is an extension spring intended for use in lawn equipment. This is a genuine replacement part made by MTD. Extension springs are responsible for applying tension to the guard which then retracts the spring. This is just one part in lawn mowers that allow the entire machine to operate properly and efficiently.A new extension spring might be needed if the current one is damaged or broken in any way such as being dented or snapped. The user might be able to tell when the extension spring is malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This replacement part is a shoulder screw intended for use in lawn mowers. This is a genuine replacement part made by MTD. Shoulder screws are an important part in many lawn mowers as they are responsible for keeping different parts in place and secure so that the user is safe while using the appliance. A new shoulder screw might be needed if the current one is damaged or broken in any way. It is possible for the shoulder screws to become loose or stripped overtime. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.