Admiral Knob, Dial & Button

This white valve knob replaces a worn, cracked or missing control knob so you can safely and easily adjust burner or oven settings. It restores a secure grip and precise control for temperature or flame adjustments. What it does:

• Replaces a damaged or stripped control knob used to turn gas or electric valve controls
• Provides a positive grip so settings can be changed smoothly and accurately
• Helps stop slipping or spinning that prevents proper temperature or flame adjustment
• Matches original fit to engage the control shaft properly when installed

• Turn off power and gas supply before removing the old knob
• Pull off the old knob straight from the control shaft; align splines and push new knob fully onto the shaft
• Do not force or hammer the knob; ensure it seats squarely to avoid damage
• Test control operation after installation and restore power/gas only when connection is secure

This is a replacement thermostat knob that restores safe, easy temperature selection on range and oven controls. The clear indicator and molded grip give reliable adjustment for everyday cooking and baking. What it does:

• Fits onto the thermostat/stove control shaft to set oven or burner temperature
• Replaces cracked, stripped, or missing knobs that are hard to turn or don't stay set
• Provides a visible pointer for accurate temperature selection
• Restores user control when the original knob is worn or damaged

• One black thermostat knob

• Turn power/gas to the appliance off and allow surfaces to cool before installing
• Pull the old knob straight off the control shaft
• Align the knob's splines with the control shaft and push on until fully seated

This replacement top burner knob restores smooth, reliable control of your cooktop or range surface burner. Use it to turn the burner on/off and adjust heat when the original knob is cracked, stripped, or missing.

• Mounts on the burner valve or switch stem to control flame/heat level
• Replaces knobs that are broken, loose, or no longer engage the stem
• Helps resolve issues like spinning freely, falling off, or hard-to-set heat
• Restores precise burner control and a clean, finished look

• Allow the appliance to cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; do not pry on the valve stem
• Align the new knob with the stem and press straight on until fully seated
• The knob markings match the correct burner position before use

This white control knob restores a clean look and reliable feel to your range's user controls. Replace a cracked, stripped, or missing knob so you can confidently select heat and function settings at the control shaft. What it does:

• Attaches to the control shaft to select heat or function settings
• Provides a pointer that aligns with panel markings for accurate selection
• Restores smooth turning when the old knob is cracked, stripped, loose, melted, or missing
• Helps ensure on/off and level adjustments engage properly

• 1 white control knob

• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the flat/D orientation of the new knob with the shaft and press straight on until fully seated
• Disconnect power and, if applicable, shut off gas before servicing any controls behind the knob
• Match part numbers to the correct location

This is a set of eight replacement control knobs designed to restore function and appearance to compatible Whirlpool appliances. The kit gives you matching knobs to operate controls and replace cracked, faded, or missing pieces. What it does:

• Replaces worn, cracked, or missing control knobs so you can reliably set cycles, temperatures, or power levels
• Restores a uniform look across the appliance control panel
• Provides a direct-fit replacement for appliances that use the 8-knob kit
• Helps improve grip and control when turning settings

• Remove old knobs by pulling straight off the splined shaft; align new knob spline and push onto the shaft until fully seated
• No special tools typically required; use gentle force to avoid damaging the shaft
• If knobs control electrical functions, ensure appliance controls are off before replacing; disconnect power or gas if advised by the appliance manual

A replacement surface switch knob that restores reliable control of a cooktop or range surface switch. Fits on the switch shaft to give a secure grip for setting and adjusting burner controls. What it does:

• Replaces cracked, faded, loose, or missing surface switch knobs so you can accurately select burner settings.
• Provides a secure, easy-to-grip control for turning surface element switches.
• Interfaces with the range's surface switch shaft to restore normal knob operation.
• Helps prevent accidental slips or mis-settings caused by damaged knobs.

• Always disconnect power (unplug the range or turn off the breaker) before servicing controls.
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the shaft until fully seated.
• If the old knob is difficult to remove, rock it gently back and forth—avoid excessive force or pry tools.

This square control knob replaces a worn, cracked, or missing selector knob for compatible Whirlpool appliances, restoring a secure grip and clear setting selection. Easy to install and restores normal control operation. What it does

• Replaces a damaged or loose control/select knob so settings can be changed easily
• Fits splined control shafts used on select Whirlpool ranges/ovens and similar appliances
• Helps eliminate slipping or inaccurate knob position while selecting heat or function
• Restores the look and feel of the control panel when the original knob is broken or missing

• Always disconnect power to the appliance before starting any repair
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated
• Do not force if knob does not seat smoothly—verify correct orientation and spline match

One knob per each package. Please order additional knobs if needed.

This replacement black valve knob lets you reliably control a cooktop or range burner by turning the valve stem. It restores a worn, cracked, or missing knob so you can adjust flame/heat settings with a firm grip. What it does:

• Fits over the burner valve stem to provide a user-friendly control surface
• Provides tactile feedback and clear detents for selecting burner settings
• Replaces damaged, melted, or stripped knobs that slip or won't turn
• Helps prevent accidental valve movement by seating securely on the stem

• One black valve control knob

• Turn off the appliance and shut off gas supply or disconnect power before replacing
• Align the knob with the valve stem and push straight on until fully seated
• If the knob does not fit securely, inspect the valve stem and replace any damaged retainer or adapter before use

This shaft-bit generator is a replacement drive shaft component that transfers motor rotation to the appliance's moving assemblies, restoring proper mechanical motion and reducing noise from damaged or worn shaft parts. What it does:

• Transfers rotary motion from the motor to the driven components for normal operation
• Helps maintain alignment and smooth rotation of connected parts
• Worn or broken units can cause grinding, rattling, or loss of movement
• Replacing a failed shaft can stop intermittent operation and restore reliable performance

• High-level replacement only: remove power before accessing internal assemblies
• Follow appliance-specific disassembly steps; secure panels and wiring before removing the old shaft
• Inspect adjacent bearings, seals, and mounting hardware; replace any damaged items

The Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set cycle durations with smooth, intuitive adjustment.

Symptoms of a faulty timer knob include:  

• The timer knob does not turn or is difficult to turn.
• The timer knob is missing

Causes of a bad timer knob can include loose or stripped internal gears from an extended operation or impact damage during loading/unloading clothes. 

Note: This is the center portion of the knob only. For the complete knob assembly, the cap and skirt must also be purchased.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white timer skirt is the decorative bezel that surrounds and protects the timer control on the appliance's control console, restoring a clean, finished appearance and helping keep debris away from the timer mechanism. What it does:

• Covers and protects the timer/control opening on the console
• Secures the timer knob area and helps keep dust and crumbs out of the control cavity
• Restores a clean, uniform look when the original skirt is cracked, faded, or broken
• Helps ensure the timer knob mounts correctly and operates without obstruction

• Disconnect power to the appliance before starting any repair.
• Typically remove the timer knob and any retaining screws or clips, then lift or snap the old skirt out and install the replacement.
• Align the replacement skirt with mounting tabs and secure without forcing; excessive force can break plastic tabs.

This is a replacement control knob for the freezer temperature control shaft. It restores a secure grip and clear detent positions so you can set the freezer temperature easily. What it does:

• Replaces a cracked, worn or missing freezer temperature control knob
• Provides a firm grip and visible setting position for accurate adjustment
• Allows the control shaft to turn and stay at selected settings
• Helps resolve symptoms like a loose, spinning or non-engaging knob

• Disconnect power to the appliance before attempting replacement
• Pull the old knob straight off the control shaft; align and push the new knob fully onto the shaft until it seats
• If resistance is felt, stop and inspect the shaft and knob for debris or damage before forcing
• If the control shaft is damaged or the knob does not secure properly, replace the control.

This thermostat knob is the front control dial that lets you set an appliance's temperature and restore easy, accurate temperature selection. It replaces a worn, cracked, or hard-to-turn knob so controls respond like new. What it does

• Provides a secure grip for turning the thermostat or temperature control
• Aligns with the control shaft to show and select temperature settings
• Fixes symptoms such as a loose, cracked, or stuck knob and difficulty changing temperature
• Restores tactile feedback and clear position indication when selecting settings

• Disconnect power or unplug the appliance and allow it to cool before servicing.
• Most knobs simply pull straight off the control shaft; align the indicator and push fully on until seated.
• If the knob uses a retaining clip or keyed shaft, match orientation before pressing on.

This replacement thermostat knob restores reliable temperature control and a secure grip on your appliance's temperature selector. It makes turning the thermostat smooth and precise so you can set cooking or cooling levels confidently. What it does:

• Replaces a cracked, stripped, or missing thermostat knob for straightforward temperature adjustments
• Provides a firm, non-slip grip to improve control when changing settings
• Stops slipping or loose knob operation that prevents accurate temperature selection
• Matches OEM fit and rotation profile for consistent operation with the original control shaft

• Always unplug the appliance or shut off power before replacing control parts
• Most installations are push-on: pull the old knob straight off the control shaft and press the new knob firmly into place
• If the old knob is stuck, use a gentle rocking motion or a knob puller; avoid excessive force that could damage the control shaft