Amana Fuse Or Sensor

This 250V, 1A fuse protects your washer's control circuit from overcurrent. Replacing it can restore control power once the root cause is corrected.

• Opens to protect electronics when current exceeds its 1A rating
• Check this part if the washer has no power, the control panel is dead, or it won't start
• A blown fuse will test open for continuity
• Repeated failure points to an underlying short or component fault that must be fixed

• Disconnect power before servicing
• Access the fuse at the control board or fuse holder
• Replace only with the same rating: 1A, 250V
• Inspect wiring/components and correct any short before restoring power

The Microwave Thermostat is a reliable component designed to regulate temperature in your microwave, ensuring optimal performance and safety. This genuine OEM part is specifically compatible with a wide range of Samsung microwave models, providing a secure and precise fit. By maintaining the correct temperature levels, the Microwave Thermostat helps prevent overheating and extends the lifespan of your appliance. Installing the THERM thermostat restores your microwaveGÇÖs functionality, allowing you to enjoy consistent heating results every time. Crafted from high-quality materials, this thermostat offers durability and dependable operation, giving you peace of mind with your repair. Whether your original thermostat is malfunctioning or needs replacement, the Microwave Thermostat is the perfect solution to maintain your microwaveGÇÖs efficiency and reliability. Trust in this genuine OEM part to keep your Samsung microwave running smoothly and effectively.

Thermal cutoff

This thermal fuse/thermostat kit replaces the dryer overheat safety components to help restore proper thermal protection and prevent overheating. It's used where the dryer fails to heat correctly or stops running due to a safety trip. What it does:

• Serves as the dryer's overheat safety cut-off, interrupting power when temperatures exceed safe limits
• Replaces failed thermal fuse or high-limit thermostat that can cause no-heat or intermittent operation
• Helps stop overheating that could damage the heating element or drum components
• Works with the dryer's control system to prevent unsafe temperature rise

• Disconnect power before starting — this part is on the appliance's electrical/heating circuit
• Access typically requires removing the dryer back panel or control panel; follow OEM service instructions
• Test wiring and continuity before and after replacement; replace both parts if either shows damage

The Microwave Thermostat is essential for maintaining optimal temperature control in your Samsung microwave. This genuine OEM part ensures accurate regulation of heat, preventing overheating and ensuring consistent performance. Designed specifically for Samsung microwave models, it guarantees a perfect fit and reliable operation. The Microwave Thermostat helps extend the lifespan of your appliance by protecting its internal components from temperature fluctuations. By choosing this genuine OEM part, you can trust in its quality and durability, making your repair process seamless and efficient. Whether your microwave is not heating properly or experiencing temperature-related issues, this thermostat provides a dependable solution to restore its functionality. Enhance your microwaveGÇÖs performance with the Microwave Thermostat , ensuring safe and efficient cooking every time.

A high limit thermostat that stops heat when a dryer's temperature gets too hot, helping protect the heating system and cabinet from overheating. It's a direct-replacement thermostat used in many gas and electric dryer heater assemblies. What it does:

• Opens the heating circuit if temperatures exceed safe limits to prevent overheating.
• Helps protect the heating element, housing, and internal components from heat damage.
• A failed thermostat can cause no heat or intermittent heating in the dryer.
• Works with the dryer's safety controls to maintain normal operating temperature.

• Disconnect power (and gas if applicable) before servicing; allow unit to cool completely.
• Located on or near the heater box or blower housing; follow your model's service manual for access.
• Replace with the exact part number to maintain original safety settings.

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

• Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
• Prevents damage to wiring and components by opening the circuit during an overload or short
• Common symptom: appliance has no power or specific functions stop working after a sudden failure
• Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
• Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
• If fuses blow repeatedly, stop using the appliance.

This high-limit thermostat is a temperature safety switch that helps prevent overheating by opening the circuit when temperatures exceed safe limits. It restores normal operation once the temperature cools, protecting the appliance and reducing fire risk. What it does:

• Monitors internal temperature and opens the circuit if heat gets too high
• Prevents overheating that can cause damage or burn odors
• Commonly replaces a failed or intermittently tripping thermal safety switch
• Works as part of the appliance's temperature-safety system, not a primary temperature control

• Disconnect power to the appliance before attempting replacement
• Observe proper wiring orientation and secure terminal connections
• Replace only with the exact part specified for your appliance

Ceramic

The thermal cutoff is an OEM part for Whirlpool dryers. This thermal cutoff plays an important safety role by automatically shutting off power to the dryer's heating element in the event of excessive temperatures.

The thermal cutoff is responsible for monitoring air temperatures inside the dryer drum and air ducts. As temperatures rise past safe levels, the thermal cutoff triggers, cutting power to prevent damage and possible fire hazards.

Causes of a bad thermal cutoff can include overheating from issues such as a clogged or blocked vent hose, venting into an unvented space, an accumulation of lint, or a failing vent switch.

Symptoms of a bad thermal cutoff include:

• The dryer not heating up or heating unevenly
• Repeatedly tripping the circuit breaker during operation
• Scorching or burning odors detected from the dryer drum or vent

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This temperature-control thermistor (temperature sensor) feeds accurate temperature data to the control so your appliance can cycle components correctly and, where applicable, manage defrost. Replacing a faulty sensor restores stable operation and consistent performance. What it does:

• Senses temperature and varies resistance to report conditions to the control
• Helps the control regulate system cycling for proper operation
• Supports defrost logic where applicable to prevent coil icing
• Common failure signs: erratic temperature control, short/long cycling, icing on the evaporator, or unexpected shutoffs

• 1 thermistor

• Disconnect power before servicing
• Note the original sensor location and wire routing; install the new sensor in the same position
• Transfer any mounting clip or sleeve from the old sensor if needed
• Fully seat connectors and route wiring away from sharp, hot, or moving parts

This thermostat monitors appliance temperature and opens or closes its electrical contacts to regulate heat and protect against overheating. Replacing a failed thermostat restores consistent temperature control and reliable appliance operation. What it does:

• Senses temperature at its mounting location and switches the circuit on/off to regulate heat
• Helps protect the unit by opening the circuit if temperature exceeds its design limit
• A failing thermostat can cause no heat, overheating/shutoffs, or erratic temperature cycling
• Restores correct temperature control when the original thermostat is stuck open/closed or out of tolerance

• 1 thermostat

• Disconnect power; shut off gas supply and allow the appliance to cool completely
• Note wire positions or take a photo; transfer wires one at a time to the new thermostat
• Mount the thermostat flush to the mating surface; reuse proper fasteners for a secure fit
• After installation, monitor initial operation and address airflow/venting or lint buildup that could cause overheating