Amana Agitator Parts

The Washer Agitator Dog set is a set of 4 OEM replacement parts for Whirlpool and Kenmore washing machines, designed to engage the agitator, allowing it to move in one direction and lock in the opposite direction. The agitator dogs also come available in the agitator repair kit WP8537433. Check your model number for compatibility.

Symptoms of failing Agitator Dogs include:

• The agitator not moving
• Only moving in one direction
• Clothes not getting cleaned due to lack of agitation
• Clothes becoming tangled

Causes of bad Agitator Dogs can range from normal wear and tear, which gradually erodes their teeth, making them too smooth to engage the agitator properly, to overloading the washing machine, which puts extra stress on the agitator and accelerates the wear of the dogs.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The medium cam agitator repair kit is an OEM part for Whirpool washers. It includes 4 agitator dogs, a medium length cam, a cap seal, a washer for the agitator bolt, and a thrust washer.

Symptoms of a bad part:

• The agitator not working or turning
• Loud grinding or clicking noises during the wash cycle
• Clothes not being thoroughly cleaned or rinsed

Causes of a faulty agitator system can include normal wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage due to impact or mishandling.

Whirlpool recommends using a small amount of grease with this kit (if no grease is present on the old thrust washer). For the Whirlpool agitator grease, order 350849. For the long cam, order 285748. For the short cam, order 285809. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Includes 4 agitator dogs, a short length cam, and a retainer for easy installation. Is your upper agitator not working properly? Get this kit. Whirlpool recommends using a small amount of grease with this kit (if no grease is present on the old thrust washer). For the Whirlpool agitator grease order 350849. For medium cam order 285811. For long cam kit order 285748

The Short Cam Agitator Repair Kit is an OEM part for Whirlpool washing machines. It's specifically designed to fix issues related to the washer's agitator, which is responsible for moving the clothes during the wash cycle to ensure they are thoroughly cleaned. This kit typically includes the cam, agitator dogs, and possibly other components needed to restore the agitator's functionality.  

Causes for needing this repair kit can vary but often include worn out agitator dogs, which can lead to the agitator not moving correctly or as forcefully as needed. 

Symptoms of a bad Short Cam Agitator Repair Kit include:

• The agitator moves freely or too easily
• Clothes are not moving properly within the wash basin
• The washing machine is noisier than usual during the wash cycle
• Clothes are not coming out as clean as they should

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Complete Agitator Assembly is an OEM part for Whirlpool washing machines. This assembly includes the central vertical agitator component along with the retainer ring. Together they are responsible for the agitation and rubbing motions that work to remove soils and stains from clothing during wash cycles.

Causes of a bad agitator assembly can include wear and tear leading to wobbly or loose motions, cracks in plastic components from repeated impacts, or corrosion of metal components.

Symptoms of a bad complete agitator assembly include:

• Vibration or shaking issues during agitation
• Improper or lack of agitating of clothes
• An agitator that is difficult to rotate by hand
• Cracks, missing pieces or corrosion visible upon inspection

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Washer Drive Block is an OEM part for Whirlpool washing machines. This component is situated between the washer's transmission and the inner tub, playing a key role in transferring the rotational motion from the motor to the tub. 

Causes for replacement often stem from normal wear and tear, which can lead to the drive block becoming worn or damaged. This wear can prevent the drive block from properly engaging with the tub, leading to inefficient cycles and potential damage to other parts of the washing machine.

Symptoms of a bad Washer Drive Block include:

• The washer tub has difficulty agitating or spinning.
• A loud noise during the spin cycle, indicating that the tub is not engaging correctly with the transmission.
• The machine vibrates excessively or seems off-balance, even with a balanced load.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Inner Cap is an OEM replacement part for Whirlpool washers that is responsible for keeping water, fabric softener, and debris from getting into the agitator assembly. The cap is located at the top of the agitator to protect the agitator's internal parts. Fabric softener dispenses through the holes in the agitator above the cap.

Description- For the O ring seal only order WPW10072840.

This part fixes the following symptoms-

• Water leakage from the agitator.
• Fabric softener not dispensing correctly.
• Poor washing performance.
• Unusual noises during agitation.
• Excessive wear on clothes.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Thrust Washer is an OEM part for Whirlpool washing machines, specifically designed to reduce friction between the moving parts of the washer's transmission system. This small but crucial component is placed between the rotating and stationary parts, allowing for smooth movement and preventing wear and tear on the transmission.  

Causes for a Thrust Washer to fail include regular wear and tear from the mechanical stress of washing cycles, improper alignment or installation that can lead to uneven wear, and the accumulation of debris or corrosion that can interfere with its function. 

Symptoms of a bad Thrust Washer include:

• The washing machine makes unusual noises during operation 
• The washer struggles to switch between cycles or fails to spin at the correct speed.
• Increased vibration or shaking of the washing machine

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Lower Agitator is an OEM part designed for Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly. For complete agitator use 285565

Symptoms of a problematic lower agitator include:

• Ineffective or poor cleaning even on light soil loads 
• Excessive vibrations or shaking of the washer tub
• Noticeable wobbling of the agitator during operation
• Visible wear, damage or cracks in the plastic components

Causes can be general wear over time, an incident that damaged the agitator, or immobilization due to foreign object obstructions.

This Whirlpool OEM replacement part is also compatible with Kenmore, Maytag, Amana and other brands as well.

The Thrust Spacer Washer is an OEM part for Whirlpool washing machines, designed to fit between the pulley and transmission shaft, ensuring smooth operation of the agitator and spin cycles. This small but essential component plays a critical role in reducing friction and wear between moving parts, helping to maintain the efficiency and longevity of the appliance. 

Causes of a bad thrust spacer washer can range from normal wear and tear, which gradually erodes its effectiveness, to improper installation or alignment, which can increase friction and cause premature failure.

Symptoms of a malfunctioning thrust spacer washer include:

• The washing machine making unusual noises during the spin cycle
• The agitator not moving smoothly or effectively
• Difficulty in the washer transitioning between cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Long Cam Agitator Repair Kit is an OEM part for Whirlpool washing machines. This kit is essential for restoring or maintaining the function of the washer's agitator, which is crucial for the proper movement and cleaning action of clothes within the machine. This kit includes 4 agitator dogs, a long-length cam, and a retainer. For the Whirlpool agitator grease order 350849.For the medium cam order 285811. For the short cam kit order 285809.

Causes of a bad Long Cam Agitator can include worn or stripped cogs, broken or degraded cam pieces, or a malfunctioning thrust spacer. These issues can impair the agitator's ability to move properly, affecting the machine's overall performance.

Symptoms of a bad Long Cam Agitator include:

• The agitator failing to turn or only moving slightly during cycles.
• Unusual noises during the wash cycle, indicating mechanical struggles.
• Clothes coming out less clean due to insufficient agitation.
• The top part of the agitator moving independently from the base.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator Base is an OEM part for Whirlpool washing machines. This component is located at the bottom of the agitator assembly and is responsible for supporting the agitator while it moves clothes during the wash cycle. This is the bottom half of the agitator. For a complete agitator search by your model. If your model does not list one you can order 285565

Over time, the agitator base can wear out or become damaged due to constant use, heavy loads, or exposure to harsh detergents. A compromised agitator base can lead to inefficient washing and potential damage to other parts of the washer.

Symptoms of a bad agitator base include:

• The agitator not moving properly or becoming loose
• Unusual noises during the wash cycle
• Clothes not being cleaned effectively
• The washer shaking or vibrating excessively

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM replacement part for Whirlpool top-loading washing machines. Situated vertically at the center of the wash basket, this post facilitates rotation and cyclonic movement of clothes during cycles.

Causes of an impaired agitator include cracking at mounting points allowing excessive wobble or detachment from the central drive shaft over multiple years of use. Mineral buildup can also scale components making smooth operation difficult.

Symptoms involve:

• Uneven wetting and inadequate oscillations leave clothes soiled
• Excessive vibrations and noise from an off-center agitator
• Inability to properly distribute detergent throughout the load

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

The Agitator Washer is an OEM part for Whirlpool washing machines. It is designed to fit between the agitator and the agitator drive shaft, ensuring smooth and effective agitation of clothes during the wash cycle. 

Over time, the agitator washer can wear out or become damaged due to the constant movement and pressure exerted during wash cycles. Causes of a bad agitator washer can include normal wear and tear, exposure to heavy loads, or misuse that puts excessive stress on the part.

Symptoms of a bad agitator washer include:

• Agitator not moving or moving improperly
• Unusual noises during the agitation cycle
• Poor cleaning performance
• Agitator becoming loose or detached

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM part for Whirlpool washing machines. It is a crucial component that provides the mechanical action necessary for effective cleaning during the wash cycle. The agitator spins, agitating the water and clothes, creating the friction and motion required to remove dirt and stains.

Causes of a bad agitator can include wear and tear from prolonged use, damage due to impact or foreign objects getting caught in the agitator, or issues with the agitator's coupling or connection to the transmission system.

Symptoms of a bad agitator include:

• Inadequate or ineffective washing performance
• Excessive noise or grinding sounds during the wash cycle
• Leaks or water spillage due to a damaged agitator seal
• Visible cracks or damage to the agitator structure

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

• The cap being loose or not fitting properly
• Water leaking into the agitator assembly
• Excessive noise during the wash cycle
• Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This top load washer agitator assembly includes both the upper and lower parts of the agitator.