Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Amana Support Parts

Best Seller
Amana Washer Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780048

Four-piece suspension rod kit connects washer drum to frame. Replace if rods are broken, worn, or springs have weakened causing excessive drum movement.

Do-It-Yourself Stories from Customers like You Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time   Jessica B. • Riverview , MI • November 13, 2019

After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were... Read more

More
$64.22
Compare At:
$77.06
You Save:
$12.84

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Suspension Rod
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780045

Suspension rod supports and stabilizes the washer tub assembly. Replace if cracked, worn, or damaged to restore proper tub support and balance.

Do-It-Yourself Stories from Customers like You Washer shook uncontrollably during spin cycle unit about 4 years old.   John H. • Nauvoo , IL • September 26, 2017

Replaced suspension springs/rods and all associated bushings in the kit. Read more

More
$74.42
Compare At:
$89.30
You Save:
$14.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Suspension Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10440729

Suspension bearing kit supports the tub assembly in top-load washers. Replace if bearings are worn, cracked, or causing excessive tub movement or noise.

Do-It-Yourself Stories from Customers like You Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time   Jessica B. • Riverview , MI • November 13, 2019

After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were... Read more

More
$9.41
Compare At:
$11.29
You Save:
$1.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Tub Suspension Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285744

Replacement tub suspension pads for washing machines. Install under the tub to cushion and stabilize during spin cycles. Replace if cracked or missing.

Do-It-Yourself Stories from Customers like You It was dancing around the floor when it went into the spin cycle   Harry W. • Landisburg , PA • January 19, 2020

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

More
$13.61
Compare At:
$16.20
You Save:
$2.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Snubber Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21002026

Snubber ring cushions the tub base during spin cycles. Replace if cracked, worn, or producing plastic shavings to restore smooth, quiet operation.

This part fixes the following symptoms
  • Shakes and moves
  • Noisy
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle.   Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

More
$10.46
Compare At:
$12.45
You Save:
$1.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W11217817

Four-rod suspension kit that supports the washer tub and absorbs vibrations. Replace when rods are bent, broken, or when the tub sags or moves excessively.

Do-It-Yourself Stories from Customers like You Banging and stopping out of balance   Gary T. • Creal Springs , IL • February 22, 2024

Replaced suspension rods. Read more

More
$87.95
Compare At:
$103.78
You Save:
$15.83

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Suspension Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285219

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

  • Excessive shaking or vibrating during the wash or spin cycles
  • Loud banging noises coming from the washer
  • The washer moving or "walking" during operation
  • Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You It was dancing around the floor when it went into the spin cycle   Harry W. • Landisburg , PA • January 19, 2020

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Shock Absorber
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822553

Shock absorber mounts to the washer tub to dampen spin cycle vibrations. Replace if cracked, broken, or worn to restore stability and reduce noise.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Our whirlpool duet washer was very noisy during spin cycles   Linda M. • Kiel , WI • September 25, 2014

We looked online at AppliancePartsPros.com under the symptoms and found it was most likely caused by the shocks. Of course there was a repair video showing how to replace all four shocks step by step, and there was a link for purchasing the four shocks at the bottom of the video. Our repair didn't go quite as quickly as on the video because we are novices, but we were able to do the repair ourselves and, once again, saved ourselves a ton of money! Now we have a very quiet washer and dryer again... Read more

More
$54.95
Compare At:
$65.94
You Save:
$10.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780051

Suspension rod kit connects the outer tub to the washer base for support and stability. Replace when rods are worn, broken, or causing excessive movement.

Do-It-Yourself Stories from Customers like You Tub was banging against the side of the washer   Chris Z. • Lewisburg , TN • August 11, 2014

Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room. Read more

More
$104.95
Compare At:
$125.94
You Save:
$20.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Upper Dishrack Rail
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385089

The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes. 

Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles. 

Symptoms of a bad upper dishrack rail include:

  • Difficulty inserting or removing the upper rack smoothly   
  • Off-track movement that impacts washing coverage
  • Detached ends or segments that compromise stability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Wheels my top dishwasher rack fell off   Paul M. • Ramona , CA • September 11, 2020

Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more

More
$56.95
Compare At:
$68.34
You Save:
$11.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Shock Absorber
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415987

The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.

Symptoms of worn or cracked shock absorber washers include:

  • Noisy operation as the washer shakes or moves during cycles
  • Physical signs of deterioration
  • Over time, increased stresses can damage connected components

Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.  

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washer drum banging loudly against sides   Anthony K. • Leander , TX • February 09, 2019

Replaced all 4 shocks. Read more

More
$71.36
Compare At:
$85.63
You Save:
$14.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Dishwasher Lower Spray Arm Support Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268342

Replacement lower spray arm support bracket for dishwashers. Mounts underneath the wash arm enclosure to securely anchor the rotating spray arm. Needed when cracked or stripped.

Do-It-Yourself Stories from Customers like You Machine running loud grew worse until it was obvious the motor blew a bearing   Robert S. • Bettendorf , IA • February 21, 2015

We initially noticed the dishwasher running loud and failing to completely clean dishes. Research suggested issues like this were normally caused by either the main circulation motor or the drain motor. Over the next week the noise worsened, and it became obvious that the circulation motor had went (loud whirring noise whenever the spin cycle kicked in). I watched a couple youtube videos on the removal and dissassembly until I felt confident that my wife and I could handle the project. For the... Read more

More
$53.95
Compare At:
$64.20
You Save:
$10.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Washer Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780044

Set of 4 suspension rods that support and steady the wash tub. Replace if rods are worn, broken, or causing excessive vibration during the spin cycle.

Do-It-Yourself Stories from Customers like You My 10 year old Maytag washer was knocking on the spin cycle   Michael A. • Keno , OR • December 04, 2023

I ordered a tub suspendion Kit for it. Read more

More
$98.22
Compare At:
$116.88
You Save:
$18.66

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Amana Dishwasher Spray Arm Mount
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385159

Secures the spray arm to the dishwasher rack, allowing proper rotation during wash cycles. Replace if cracked, broken, or missing to restore spray arm.

Do-It-Yourself Stories from Customers like You The water parts were broken the washer is about 16 years old   Katrina M. • Fontana , CA • July 14, 2018

We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set. Read more

More
$52.95
Compare At:
$62.48
You Save:
$9.53

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Amana Shock Absorber
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316766

The Shock Absorber is an OEM part compatible with Whirlpool washing machines. It is a crucial component that helps reduce vibrations and dampens movement during the spin cycle. The shock absorber absorbs mechanical stresses to prevent the washer tub, suspension springs, and other components from wearing out prematurely.  

Causes of a bad shock absorber include wear and tear over time, cracks or breaks from heavy loads, or damage due to impact.  

Symptoms of a bad shock absorber include:

  • Excessive shaking, vibration or noise during the wash and spin cycles   
  • The washer walking or moving during operation
  • Premature failure of other suspension parts like springs or the washer frame
  • Potential leaks if movement stresses plumbing connections

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

More
$70.34
Compare At:
$84.41
You Save:
$14.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Amana Dishwasher Water Inlet Hanger
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385160

Secures the dishwasher's water inlet tube in position, preventing movement and strain on fittings. Replace if cracked, broken, or missing to restore support.

Do-It-Yourself Stories from Customers like You The water parts were broken the washer is about 16 years old   Katrina M. • Fontana , CA • July 14, 2018

We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set. Read more

More
$23.95
Compare At:
$28.26
You Save:
$4.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Amana support replacement parts are essential in keeping your appliances running smoothly and extending their lifespan. It's like having a toolkit for your favorite gadgets, ensuring they stay in top-notch condition for all your household needs.

Your Amana appliances, whether it's a washer, dryer, refrigerator, or lawn mower, play a vital role in your daily life. The right Amana parts can make a world of difference when it comes to maintaining or restoring their functionality. Think of these parts as the unsung heroes that keep your essential equipment working efficiently.

When you need Amana support parts, opting for OEM (Original Equipment Manufacturer) replacements is a smart choice. These parts are designed specifically for your appliances, guaranteeing quality and compatibility. You won't have to worry about mismatched components or subpar performance, so you'll be back to your routine in no time.

Next time you find yourself in need of Amana support replacement parts, remember that quality and availability are always within reach, ensuring your appliances continue to serve you well.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store