Amana Refrigerator Gasket & Seal

My husband followed the instructions on the video. Read more

• Fridge too warm

Unfortunately, this model has the screws that you need to loosen before you can squeeze the rubber in but the gaskets fit perfectly. It took a lot more time than the video showed but that was because the video was of the pop in type. Be sure when pushing the rubber under the metal strip you make sure it actually goes in. I think the last people installed the gaskets incorrectly and that's why they broke and pulled out of place. Unscrew the bolts first, I used an electric drill. The old gasket... Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

Refrigerator door gasket. I ordered one gasket from you guys, it was so easy to replace. Everything is working fine Read more

I tried unsuccessfully to find the model numbers for these two appliances until I called your company and your representative found them immediately and sent me the parts I think that the same day or the next day. Instructions were clear and easy and I installed them within moments, neither one was any trouble. Read more

• Door sweating
• Fridge runs too long

I used the Company's chat line on 11/18/2015 to speak with a representative to make sure I would be ordering the correct replacement part. That was a very helpful and pleasant experience. The agent assured me I would be receiving the part within two days and she was spot on. She indicated I would be receiving an Order Confirmation email with a link to a repair video. The video was very helpful in describing the process to remove the old gasket and the tools I would need. I installed the... Read more

I purchased a freezer gasket + key// from appliancepartspros.com //easy to order. I did not need to lock up my freezer but thought it might help the gasket seat (good thought). To replace gasket I started at top of door, wow, I should have started at bottom. Hated laying on my "belly" to screw in gasket. Ok, I am 77 years old but got the job done. All went okay until I had to close the door, the door would not stay shut. Key: I locked the door for a week. New seal is settling in, freezer is... Read more

Instructions are very dumb, but it's an easy fix. Loosen all the nuts that hold the metal bars that hold the old gasket. (Loosen. Don't take them off!) Pull off the old gasket. Slip the new into place all the way around. Get the corners in position, middles can be loose. Tighten the corners, then work the middles into place and tighten as you go. Done. Read more

Bought gasket from website, followed easy helpful video instructions, perfect fit. Read more

I replaced the gasket Read more

• Door sweating

Ordered new door seals (gaskets) from Appliance Parts Pros. I was able to replace the freezer door seal without taking the door off the refrigerator. (Note: this is an over/under type refrigerator, with the freezer section on top) However, the first attempt at replacing the refrigerator door seal without removing the door from the fridge did not go well as the door appeared "warped" after I reassembled it and would not come close to sealing when I closed it. When I took the door off the fridge... Read more

• Freezer section too warm

I ordered the replacement gasket and...replaced it. One issue was that the replacement procedure was not at all like the video to which I was directed when I got the gasket. The video showed a gasket with a rigid flange that had to be inserted into the door structure. On my Amana, I clearly had to remove the inner plastic liner and set the gasket under it. This was not particularly difficult but certainly wasn't the same process. Also, I removed the freezer door to do the replacement in... Read more

Removed old gasket from groove then pushed new one into the cleaned groove. Took 5 minutes. Read more