Amana Washer Dispenser Parts

The Washer Dispenser Drawer is an OEM replacement part for Whirlpool washing machines. It is a removable compartment designed to hold and dispense detergent, fabric softener, and other laundry additives during the wash cycle.

Symptoms of a faulty dispenser drawer include:

• Detergent or fabric softener not being dispensed properly
• Clogging or leaking from the dispenser drawer
• Difficulty opening, closing, or removing the drawer

Causes of a bad dispenser drawer can range from buildup of residue or blockages, damage to the drawer components or latch mechanism, or normal wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The Liquid Fabric Softener Dispenser is an OEM part for Whirlpool washing machines. It is designed to dispense fabric softener at the appropriate time during the wash cycle, ensuring that your laundry comes out soft and fresh. This liquid fabric softener dispenser fits most 1984 and newer 24 and 27 inch washing machines. This part inserts into the top of the agitator. Laundry bag AP4354945 is also recommended to prevent damage to delicates clothing.

Causes of a bad fabric softener dispenser can include clogs from fabric softener residue, wear and tear from regular use, or mechanical failure of the dispenser mechanism. If the dispenser is not functioning correctly, it can lead to ineffective softener distribution.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the cycle
• Residue buildup in the dispenser compartment
• Leaks or drips from the dispenser
• Fabric softener remaining in the dispenser after the cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fabric Softener Dispenser is an OEM replacement part specific to  Whirlpool washing machines. It is responsible for accurately dispensing the appropriate amount of liquid fabric softener during the rinse cycle to soften and protect clothes. 

Causes of a bad fabric softener dispenser can include clogging of the dispenser or dispensing mechanisms from residue buildup, cracks or openings in the plastic housing allowing for leaks, broken or malfunctioning electronic components controlling the dispensing process.

Symptoms of a bad fabric softener dispenser include:

• Improper dispensing of fabric softener resulting in excess or insufficient softener  
• Leaking or dripping of softener from the dispenser housing
• The dispenser door or lid not opening or closing properly
• Liquids dispensing at the wrong times during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Washer Dispenser Assembly is an OEM part for Whirlpool washing machines. It is responsible for dispensing the detergent and fabric softener at the appropriate times during the wash cycle. This assembly ensures that cleaning agents are released properly, contributing to effective and efficient washing performance.

Causes of a bad washer dispenser assembly can include clogging from detergent or fabric softener buildup, damage to the dispenser mechanism, or electrical malfunctions that prevent proper operation.

Symptoms of a bad washer dispenser assembly include:

• Detergent or fabric softener not dispensing correctly
• Residue left in the dispenser drawer
• Poor cleaning results
• Leaks around the dispenser area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bleach Dispenser Cup is an OEM part designed specifically for Whirlpool brand clothes washers. It holds bleach added during wash cycles for odor elimination or stain removal. 

Causes of a faulty cup include cracks or breaks from impact. Chemical erosion may also weaken plastic over extended use. 

Symptoms of a problematic dispenser cup are: 

• Leaks or spills of bleach inside the washing machine 
• Inability to accurately dispense bleach at proper times in cycles

Compatible models include some brands produced by Maytag, Amana, and Kenmore.

The Detergent Lid Pin is an OEM part for Whirlpool dishwashers. This pin plays a crucial role in securing the detergent dispenser lid, ensuring that it opens and closes correctly during the washing cycle. This dishwasher detergent lid pin is also included in the cover kit 4387043.

Over time, the detergent lid pin can wear out or break due to regular use, exposure to harsh detergents, or accidental force. When the pin is damaged, it can cause the detergent lid to malfunction, leading to improper dispensing of detergent and reduced cleaning performance.

Symptoms of a bad detergent lid pin include:

• The detergent dispenser lid not staying closed
• Detergent not being dispensed correctly during the wash cycle
• Visible damage or wear on the pin
• The dispenser lid not opening or closing smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Drawer is an OEM part for Whirlpool washing machines. This drawer holds and dispenses detergent, fabric softener, and bleach into the washer at the appropriate times during the wash cycle.  

Causes of a bad detergent drawer can include buildup of detergent residue, damage from overloading, or general wear and tear.

Symptoms of a bad detergent drawer include:

• Detergent not dispensing properly
• Drawer difficult to open or close
• Leaks from the detergent drawer area
• Visible cracks or damage

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This bleach dispenser for a washing machine holds liquid bleach and releases it into the tub at the appropriate point in the cycle, helping dilute bleach and protect fabrics from contact with undiluted solution. What it does:

• Holds and meters liquid bleach until the machine calls for dispensing
• Helps ensure bleach mixes with water for even, diluted distribution
• Replace if cracked, clogged, or leaking
• Common symptoms include bleach not dispensing, bleach left in the cup, leaks around the dispenser area, or bleach spots on fabrics

• 1 bleach dispenser

• Disconnect power and turn off water before servicing
• Access and mounting vary by model; follow your service manual to reach the dispenser
• Detach hoses/clamps or fasteners, transfer any reusable hardware, and seat the new dispenser fully
• Reconnect, then run a test fill/rinse to check for proper dispensing and leaks

This door-mounted dispenser stores detergent and rinse aid and releases them at the right time in the cycle to help deliver clean, spot-free dishes. Replace a broken, leaking, or jammed dispenser to restore proper detergent release.

• Holds detergent and rinse aid and dispenses them during the wash cycle
• Supports consistent cleaning performance by timing chemical release
• Detergent cup won't latch or open
• Rinse aid doesn't dispense or leaks from the dispenser
• Detergent remains in the cup after the cycle

• Disconnect power and turn off the water supply before servicing
• Remove the inner door panel to access the dispenser
• Disconnect the wire harness, release locking tabs/fasteners, and install the new unit flush to the door
• Clean the sealing surface; tighten fasteners evenly and run a test cycle to check for leaks and proper dispensing

This is the siphon insert for the washer dispenser's bleach and softener compartments. It restores proper siphoning so additives empty at the right time and helps reduce standing water or residue in the drawer.

• Creates the siphon action that draws bleach and fabric softener from their cups during the rinse cycle
• Promotes complete dispensing and consistent rinse performance
• Helps minimize leftover liquid and residue buildup in the dispenser
• Typical symptoms include bleach or softener remaining after the cycle, standing water in the cups, or weak/irregular dispensing

• Disconnect power and turn off water before servicing
• Remove the dispenser drawer; lift out the old siphon from the bleach/softener cup
• Clean any debris in the cup; firmly seat the new siphon, aligned per the cup markings
• Reinstall the drawer and run a rinse cycle to verify proper draw and no leaks

One piece. Works on most Maytag washers. Color: white. It measures about 5 inches in diameter, and 5-1/2 inches high.

This dishwasher dispenser stores detergent and rinse aid and releases them at the correct points in the cycle to support consistent cleaning results. Replace a broken, stuck, or leaking dispenser to restore reliable detergent delivery.

• Holds detergent and rinse aid and dispenses them automatically during the wash and rinse portions of the cycle
• Door/actuator mechanism controls the timed release of detergent
• Seals help prevent leaks around the dispenser opening
• Typical failure symptoms: detergent cup won't latch or open, detergent left in the cup, rinse aid not dispensing, or leaks from the dispenser area

• Disconnect power and turn off water supply before servicing
• Remove the inner door panel to access the dispenser; disconnect the wire connector
• Release mounting screws/clips, clean the door cutout, and seat the new dispenser evenly
• Tighten screws in a cross pattern to compress the gasket uniformly; run a test cycle to check for leaks and proper operation

The Divider is an OEM part for Whirlpool washers. It fits within the dispenser drawer, creating separate compartments for different laundry products such as detergent, fabric softener, and bleach. It prevents mixing and allows for convenient dispensing during each wash cycle.

A bad dispenser drawer divider can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or broken divider, difficulty in separating the compartments, or improper dispensing of laundry products, it may be time to replace this part.

Symptoms of a bad dispenser drawer divider include:

• Loose or broken divider
• Difficulty in separating the compartments
• Improper dispensing of laundry products

Restore your Whirlpool washer's dispenser drawer by replacing the faulty or damaged divider with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This outer trim panel cover replaces a cracked, broken or missing exterior cover to protect internal components and restore the appliance's finished appearance. It fits where the factory cover shields wiring and mounting points. What it does:

• Protects wiring, switches and internal parts from debris and accidental contact
• Restores the appliance's exterior finish and prevents drafts or gaps
• Stops rattling or vibration caused by damaged or loose trim
• Helps keep moisture and dust out of sensitive areas

• Disconnect power to the appliance before starting any repair.
• Remove any adjacent panels or fasteners to access the cover; retain screws and clips for reassembly.
• Align cover tabs and secure with original screws or clips; do not force or overtighten to avoid cracking.
• Replace those parts before finishing the repair.

The Door Latch is an OEM part for Whirlpool washers. It ensures that the washer door locks securely during operation, preventing leaks and ensuring that the washer will not operate unless the door is properly closed. This latch is crucial for the safety and efficiency of the washing cycle.

Causes of a bad door latch can include wear and tear from frequent use, physical damage from slamming the door, or electrical issues that prevent the latch from locking or unlocking correctly. A malfunctioning latch can interrupt the wash cycle and compromise safety.

Symptoms of a bad Door Latch include:

• The washer door not locking or unlocking
• The washer not starting or stopping mid-cycle
• Error codes related to door lock issues
• Difficulty in opening or closing the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Dispenser Drawer is an OEM part for Whirlpool washing machines. It plays a crucial role in dispensing detergent during the wash cycle. The drawer is designed to hold and release the appropriate amount of detergent at the right time, ensuring optimal cleaning performance. 

Symptoms of a bad dispenser drawer include:

• Improper dispensing of detergent  
• Insufficient cleaning results
• Leaks or drips from the dispenser area
• The drawer not opening or closing correctly

Causes of a bad dispenser drawer can include clogging or blockage in the drawer mechanism, damage to the drawer or latch, or malfunctioning electronic components that control the dispensing process. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.