Parts for Lg WM3700HWA/02: Cabinet & Control Panel Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This tub assembly is the inner drum component for compatible front-load washers, providing the rotating basket that holds laundry during wash cycles for effective tumbling and water drainage. What it does

• Replaces the washer's inner drum that holds and tumbles clothes during wash and spin cycles.
• Restores proper rotation to reduce rubbing, grinding, or noisy operation caused by a damaged drum.
• Helps ensure proper water drainage and balanced spinning when the drum is intact and centered.
• Can resolve symptoms like loud thumping, scraping noises, or clothes catching on a damaged drum surface.

• Disconnect power and water supply before beginning any repair.
• Drum assemblies are heavy — get a helper and use proper lifting technique.
• Installation typically requires removing the washer cabinet and drive components; follow the OEM service manual or a step-by-step guide.

The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time. 

Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.

Symptoms of an insufficient hose retainer clip include:

• Loose, misrouted, or flopping hoses behind the control panel
• Bulging or kinked hoses that restrict water flow
• Water leaks at hose connections

This OEM replacement clip is compatible with select Kenmore front-loaders.

This bolt assembly fastens key components so they stay aligned and secure during operation. Replacing a stripped, rusted, or missing fastener restores stability and helps prevent vibration, noise, and premature wear.

• Securely joins mating parts to maintain proper alignment
• Helps resist loosening from rotation, movement, or vibration over time
• Replaces damaged or missing hardware with the correct fit for the application
• Typical symptoms include a loose/wobbly component, rattling or knocking sounds, or visible wear to the bolt head/threads

• Disconnect power before servicing; if applicable, turn off water supply
• Support the part being fastened to relieve stress when removing/installing the bolt
• Start threads by hand to avoid cross-threading; tighten firmly per manufacturer guidance—do not overtighten
• Reinstall any original washers/spacers in the same order and ensure smooth operation

This bolt assembly secures a critical component inside the appliance. Replacing a stripped, loose, or missing fastener restores a tight fit, reduces vibration and noise, and helps prevent further wear or damage.

• Fastens and holds an internal assembly securely in place
• Maintains alignment to minimize vibration and noise
• Helps prevent slippage that can interrupt cycles
• Direct replacement when the original bolt is stripped, corroded, or lost

• Disconnect power and water supply before servicing.
• Access the fastener and support the assembly to avoid strain.
• Remove the old bolt and inspect/clean mating threads.
• Hand-start the new bolt, then tighten to manufacturer specification; use threadlocker only if specified.

This factory bolt assembly is a hardware fastener used to secure designated components within the appliance. Replacing a worn or missing bolt restores a tight, stable connection to help reduce vibration and noise while keeping parts properly aligned. What it does:

• Secures a component to its bracket, frame, or base
• Maintains alignment and stability of the assembly
• Helps minimize vibration and rattling when tightened correctly
• Common symptoms: missing or stripped bolt, loose connection, unusual vibration/noise, visible damage to the bolt head or threads

• Disconnect power and, if applicable, shut off water supply before servicing
• Support the component being fastened to prevent strain while removing/installing the bolt
• Start threads by hand to avoid cross-threading; tighten snugly per OEM guidance—do not overtighten
• Reinstall any washers, sleeves, or grommets in the original order if present

This top plate is the replacement interior top panel that protects microwave components and helps direct heat away from the cavity. A firm, exact-fit replacement restores safe operation and prevents food debris from reaching internal parts. What it does:

• Covers and shields internal microwave components from spills, splatters and food debris
• Helps maintain proper cavity surface for even cooking performance
• Replace if the top plate is dented, warped, corroded or has surface damage
• Prevents debris buildup that can cause odors, smoke or arcing when reheating food

• One top plate

• Disconnect power and unplug the appliance before servicing
• Handle edges carefully; metal panels may be sharp
• Verify part alignment and secure all fasteners; do not force-fit

The PCB Assembly, Display is an OEM part specifically designed for LG front-load washers. It controls the washer's user interface including digital readouts, cycle/option buttons, and fault/status displays.

Causes of a bad PCB Assembly, Display would be damaged from water damage when cycling, long-term component degradation, or shocks exceeding durability. Moving parts concentrate stress that electronic paths must withstand. 

Symptoms of a bad PCB Assembly, Display include:

• Unresponsive or "glitchy" controls like stuck buttons  
• Garbled or missing characters on the screen
• Inability to change settings or view cycle status
• Frequent error codes obscuring instructions

Replacing with this genuine LG board resurrects full interactivity for customers. Clear guidance simplifies use while smart notifications maintain machine wellness. This LG part fits Sears/Kenmore washers as well.

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

The Motor Rotor Bolt is an OEM part for LG washing machines. It secures the rotor to the motor shaft, playing a crucial role in the efficient functioning of the motor and ensuring the washer drum spins correctly during wash cycles.

Causes of a bad motor rotor bolt can include wear and tear from prolonged use, corrosion due to exposure to moisture, or damage from over-tightening or accidental impacts. A faulty motor rotor bolt can compromise the stability of the motor, leading to various operational issues.

Symptoms of a bad motor rotor bolt include:

• The washer drum not spinning or spinning irregularly
• Unusual noises during operation, such as banging or clunking
• The washer failing to complete cycles or stopping mid-cycle
• Visible wear or damage to the bolt or surrounding components

This OEM LG part is also compatible with Sears/Kenmore models.

This cabinet cover is a direct-replacement outer panel that restores the appliance's finished look while protecting internal components from dust and debris. It helps keep the cabinet sealed and prevents exposure from a damaged or missing panel. What it does:

• Replaces a cracked, dented, or missing cabinet cover to restore appearance
• Shields internal parts and wiring from dust, spills, and foreign objects
• Reduces rattles and vibration caused by loose or damaged panels
• Helps preserve proper airflow pathways by keeping the cabinet closed

• Disconnect power to the appliance before starting any work.
• Handle edges carefully; metal panels can be sharp.
• Basic hand tools are typically required; keep screws and mounting hardware organized.

This bolt assembly secures the washer's tub for transport, helping protect the suspension and internal components when moving the appliance. Replace lost or damaged shipping hardware so the drum stays locked and protected in transit.

• Locks the tub to minimize movement during transport or shipping
• Helps prevent damage to shocks, springs, hoses, and wiring while moving
• Replaces stripped, bent, or missing shipping bolts
• Use when relocating the appliance or returning it for service

• Unplug the appliance and turn off water before preparing to move it
• From the rear of the cabinet, thread the bolt into the designated shipping-bolt location and tighten until snug; do not overtighten
• Install all required shipping bolts for your model before transport; keep the unit upright while moving
• Remove all shipping bolts before operating the washer and save them for future moves

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

• Water leaks from the door area during the wash cycle
• Loose or shifting door boot seal
• Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

This multi-connector harness is the replacement wire assembly that links the appliance's control board to multiple components so signals and power flow correctly. Installing the correct harness restores reliable electrical connections and control response. What it does:

• Routes power and signal between the control board and connected components using multiple color-coded wires and connectors
• Replaces damaged, burnt, or frayed wiring that can cause intermittent operation or failure to start
• Prevents short circuits and poor connections that produce error codes or erratic performance
• Maintains correct connector pin layout for proper component communication

• One multi-connector harness (single assembly)

• Disconnect power before beginning work to avoid shock or damage
• Verify connector orientation and full seat on both ends; do not force mismatched plugs
• Inspect mating connectors and terminals for damage or corrosion before installation

The LG Washer Door Hinge Assembly is an OEM component specially designed for LG brand laundry machines. This assembly includes the front-loading door hinges that allow the washer door to securely open and close.

Symptoms of a bad hinge assembly include:

• A door that falls off entirely or does not stay attached 
• Squeaks, squeals, or grinding noises coming from hinges
• Restricted or difficult door-swinging movement
• Detached or failing hinge pins allow the door to sag

Causes of a bad hinge assembly can include wear and tear from years of constant door swinging motions, corrosion buildup interfering with smooth operation, or damage from excessive weight loads improperly handled.

The Motor Stator Bolt is an OEM part for LG washing machines. This bolt secures the stator to the motor, ensuring the stability and proper functioning of the washing machine's motor assembly.

Causes of a bad motor stator bolt can include wear and tear over time, improper installation, or damage from over-tightening or impact. A compromised bolt can lead to instability in the motor, potentially affecting the washer's performance.

Symptoms of a bad motor stator bolt include:

• Unusual noises during the wash cycle
• Vibrations or shaking of the washer
• The motor not functioning properly or failing to start

This OEM LG part is also compatible with Sears/Kenmore.

This wiring harness connects the appliance's control or component circuits to restore reliable electrical connections and proper function. It replaces a damaged or worn harness to stop intermittent power, control errors, or non-working components. What it does:

• Carries electrical signals between the control board and sensors/components.
• Replaces frayed, burnt, or broken wires that cause intermittent operation or component failure.
• Helps resolve control board communication errors or circuits that won't power.
• Restores secure plug-and-play connections when original connector ends are damaged.

• One wiring harness, single

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Route wires along existing clips and channels; avoid sharp edges and hot surfaces.

This outer door frame restores the exterior trim and support for the appliance door, renewing appearance and helping the door close properly. It's the replacement outer frame used when the original is cracked, bent, or cosmetically worn. What it does

• Replaces damaged or cracked outer door trim that affects fit and look
• Restores the door's outer edge so the door closes and seals more evenly
• Prevents sharp edges and cosmetic damage from a broken frame
• Works with existing inner door components and glass when undamaged

• Disconnect power (and water if applicable) before starting; work on stable surface
• Remove the door to access outer frame; retain all fasteners
• Handle any door glass or inner panels carefully to avoid breakage and injury
• Follow OEM torque recommendations for screws; test door alignment and operation after reinstall

This locker hook engages the appliance's latch/lock mechanism to keep the door securely closed during operation. Replacing a worn or bent hook restores reliable latching and helps prevent nuisance door/lock errors and cycle interruptions.

• Interfaces with the door lock/latch to secure the door during use
• Allows the safety interlock to confirm the door is closed
• Common symptoms: door won't latch or stay closed, needing to hold/push door to start, door/lock error messages
• Physical signs of failure: bent hook, worn contact surface, or cracked/broken mounting ears

• Disconnect power; turn off water supply if applicable
• Access the hook location on the door or cabinet/tub (varies by model); remove mounting screws/clips
• Transfer any reusable hardware; align the new hook so it mates cleanly with the latch/lock and tighten fasteners
• Close the door to verify smooth engagement before running a cycle

This holder assembly secures its mating component in the correct position inside your appliance. Replacing a worn or cracked holder restores proper support and alignment to help the connected part operate reliably.

• Provides a stable mounting point to keep the associated component in place
• Maintains alignment to reduce vibration, rattling, or shifting
• Common symptoms: cracked or broken tabs, loose fit, component moving or falling out
• Visual damage or deformation of the original holder

• Disconnect power and, if applicable, shut off water before servicing
• Access the part per your model's service instructions and remove the damaged holder
• Transfer and reuse any screws, clips, or seals from the original as required
• After installation, confirm secure fit and proper alignment before restoring power

The Inlet Valve Assembly is an OEM part for LG front-loading washing machines. It is a critical component that controls water flow into the washer tub. Comprised of durable solenoid valves and precision sealing elements, the inlet valve assembly works automatically to supply the appropriate amounts of hot and cold water at predetermined stages in each cycle. 

Causes of a bad inlet valve can include mineral buildup obstructing valve ports over time, worn valve seals resulting in water leaks, or electrical faults preventing the solenoids from opening and closing reliably.

Symptoms of a bad inlet valve assembly include:

• The washer failing to fill with water 
• Uneven or unbalanced water temperature
• Water leaks at the valve connections
• Error codes related to water level or temperature detection

This OEM LG part is also compatible with Sears/Kenmore front-load washers. 
 

The Inlet Valve Assembly is an OEM component specifically designed for LG front-load washers. Located near the water supply hose connection, the inlet valve controls the flow of water entering the washer tub.

Symptoms of a bad inlet valve assembly include:  

• Slow or incomplete fills during wash cycles  
• Water leaks when the washer is off or idle
• Fluctuations in water levels inside the tub
• The valve becomes difficult to turn on or off 

Causes of failure can be mineral buildup clogging internal ports, worn seals no longer tightly closing the passageway, or damaged electronics affecting valve operations.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

The Stator Assembly is an OEM part for LG washing machines. The stator assembly acts as the stationary component of the motor that drives the wash drum and basket. It converts alternating current into mechanical motion through electromagnetic induction, working together with the rotor to power the motor.

Causes of a bad stator assembly can include defects in the windings, bearing wear, or damage due to excessive heat.

Symptoms of a bad stator assembly include:

• The motor failing to start or run
• Abnormal noises coming from the transmission
• Vibration or shaking issues
• Inability to advance cycles

This OEM LG part is also compatible with some Kenmore models.

This base bracket mounts to the washer's lower frame to hold associated components securely in place. By keeping parts properly anchored, it helps maintain alignment and stability during operation to minimize vibration and noise.

• Attaches to the washer base and provides a mounting point for designated hardware
• Helps keep assemblies from shifting during agitation and spin
• Supports smooth, quieter operation by reducing vibration and rattling
• Common signs of failure include a bent or cracked bracket, loose/misaligned parts, or unusual noises from the base area

• Disconnect power and water supply before servicing; move the appliance for safe access
• Carefully tip or lay the washer back on protective padding; use a helper for stability
• Note the bracket's orientation and reuse existing mounting hardware as applicable
• Tighten fasteners securely and verify nearby parts have proper clearance before test run

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This knob assembly replaces a damaged or missing control knob so you can securely and accurately set cooktop or oven controls. Durable replacement restores tactile grip and proper engagement with the control shaft. What it does:

• Replaces a cracked, melted, stripped, or loose control knob that won't turn or stay in position
• Provides correct spline engagement for consistent selection of heat or function settings
• Restores safe, predictable control response when adjusting temperature or burner level
• Helps prevent accidental slips or improper control input from worn knob surfaces

• One knob assembly

• Disconnect power to the appliance before servicing; for gas ranges also shut off the gas supply
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob resists, verify correct orientation—do not force or hammer the part into place
• If the control shaft or switch is damaged, replace the underlying control/switch assembly rather than relying on the knob

The Detergent Dispenser Box is an OEM part for LG washing machines. Housed within the washer door, this compartment delivers precise amounts of detergent at the optimal time. 

Symptoms of a bad dispenser box include:

• Cracks or breaks compromising the dispenser structure
• Detergent leaking or residual buildup outside of the box
• Failure to fully dispense detergent during wash cycles 

Causes of failure can include plastic fatigue from years of opening/closing the washer door. Repeated impacts may also damage internal mechanisms. This OEM LG part can also be used on Kenmore/Sears appliances. 

A complete dispenser assembly that routes and dispenses ice and water from the refrigerator door. Replaces a worn or damaged dispenser to restore reliable dispensing and help prevent leaks or sticking controls. What it does:

• Channels water and ice from the cabinet to the exterior dispenser chute for user access.
• Houses the dispenser actuator/controls and internal valves that start and stop dispensing.
• Helps stop drips and misfeeds caused by cracked housings or broken actuator parts.
• Common symptoms: no water or ice from the dispenser, intermittent dispensing, leaking at the dispenser, or a stuck/loose dispenser paddle.

• Disconnect power to the appliance and shut off the water supply before starting work.
• Handle the door and dispenser housing carefully to avoid damaging the finish or internal tubing.
• Small fasteners, clips or electrical connectors may need to be removed—follow the refrigerator's service manual for door disassembly.

This Cover Cap replaces a missing or damaged cosmetic cap to restore a clean finished appearance and help protect underlying fasteners and openings from dirt. It's a simple, low-cost fix for visible damage. What it does:

• Covers and conceals exposed screw heads, fastener holes, or trim openings for a finished look
• Helps limit dirt and debris accumulation in small openings
• Useful when the original cap is cracked, broken, or lost
• Restores appliance aesthetics without replacing larger panels

• High-level: typically snaps or presses into place; may require removing the adjacent trim or panel for access
• Disconnect power and water (if applicable) before removing panels to avoid electrical or water hazards
• Use gentle prying with a plastic trim tool to avoid scratching surrounding surfaces

The Dispenser Hose is an OEM part for LG washing machines. It connects the detergent dispenser to the washer tub, allowing detergent and other cleaning agents to be delivered effectively during the wash cycle.

Causes of a bad dispenser hose can include regular wear and tear, damage from harsh detergents, or physical damage due to kinks, pinches, or impact. Over time, the hose can become brittle, cracked, or clogged, affecting its ability to function properly.

Symptoms of a bad dispenser hose include:

• Leaks or drips from the hose area
• Detergent not dispensing correctly or at all
• Water pooling around the washer
• Visible cracks or splits in the hose

This OEM LG part is also compatible with Sears/Kenmore models.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Includes sensor probe

This inlet hose connects the home water supply to the appliance so it can fill properly. It replaces a worn or leaking supply hose to restore safe, reliable water flow for normal cycles. What it does:

• Directs incoming water from the household supply to the appliance inlet valve
• Works with the appliance's inlet valve and fittings to allow proper fill and rinse actions
• Commonly replaces hoses that leak, spray, kink, or block water flow
• Helps stop slow fills or intermittent filling caused by damaged or deteriorated hoses

• One inlet hose

• Turn off water supply and disconnect power before starting work
• Inspect and replace any damaged O-rings or fittings; use approved replacement fittings if needed
• Hand-tighten connections, then snug with a wrench—avoid over-tightening to prevent damage
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks

The Dispenser Inlet Hose is an OEM part for LG washing machines. This hose directs water from the water inlet valve to the detergent dispenser, ensuring that water mixes with the detergent before entering the drum for efficient washing. The hose is designed to withstand high water pressure and temperature fluctuations.

Over time, the dispenser inlet hose can become clogged, cracked, or worn out due to regular use. Causes of a bad inlet hose include mineral deposits or debris buildup, wear and tear, and exposure to high temperatures or pressure that can cause the hose to degrade.

Symptoms of a bad dispenser inlet hose include:

• Leaking water around the detergent dispenser area
• Reduced water flow into the dispenser
• Visible cracks or wear on the hose
• Incomplete dissolution of detergent during wash cycles

This OEM LG part is also compatible with Sears/Kenmore.

The Drain Pump Assembly is an OEM part for LG washing machines. It drains water out of the washing machine tub at the end of each cycle.

The drain pump works automatically through a programmed cycle to pump used washing water through the drain hose port and out of the machine following each load.  

Causes of a bad drain pump can include worn motor windings, fractures or cracks in the plastic impeller housing, or blockages within the pump chamber. Please note, this is just the drain pump component. It does not include other drain system pieces.

Symptoms of a bad Drain Pump Assembly include:

• Water remaining in the tub after cycles have finished
• Strange noises or vibrations coming from the pump motor
• Inability to fully drain even when the drain hose is clear

This OEM LG part is also compatible with some Kenmore models.

This is the direct-drive rotor for the dishwasher wash motor. It pairs with the stator to spin the impeller and circulate wash water through the spray arms, helping restore proper spray pressure and quieter operation when the original rotor is worn.

• Couples with the stator to drive the circulation pump impeller
• Moves wash water through the spray arms for consistent cleaning performance
• Common failure signs: little or no spray, poor cleaning, loud humming or grinding from the pump area, or intermittent wash action
• Physical damage or weakened magnets can prevent proper rotation

• Disconnect power and water supply and pull the unit forward for access
• Remove the toe-kick and drain remaining water at the sump
• Remove the pump cover and center fastener, then pull the old rotor straight off
• Seat the new rotor fully, reassemble, and run a test cycle to check operation and leaks

The Pressure Switch Assembly is an OEM part for LG washers. This pressure switch plays a crucial role in monitoring the pressure levels within the washer tub during various cycles and phases of operation. It is designed to open and close electrical circuits precisely based on pressure readings, signaling the control board to advance the program as needed. 

Symptoms of a bad pressure switch include:

• Inability to complete cycles 
• Error codes related to pressure 
• Repeatedly stopping or not starting cycles
• Strange noises or vibrations 

Causes of failure can include cracks, corrosion or wear over prolonged use. Replace yours today with this genuine LG part to restore optimal functioning and performance.

This OEM LG part is also compatible with Sears/Kenmore.

The Suspension Spring is an OEM part for LG washing machines, specifically designed to support the tub assembly and maintain its stability during the wash and spin cycles. This spring plays a critical role in absorbing vibrations and reducing the amount of movement transferred to the washing machine's frame, ensuring smooth and quiet operation. 

Causes for a Suspension Spring to fail include normal wear and tear from repeated use, overloading the washing machine beyond its capacity, which can stretch or stress the springs, and corrosion from exposure to moisture and laundry detergents. 

Symptoms of a bad Suspension Spring include:

• Increased vibration and noise during the spin cycle.
• The washing machine "walking" or moving from its original position.
• Uneven drum movement, leading to inconsistent washing and spinning.

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.

Symptoms of a bad holder include: 

• Loosening or detaching internal parts leading to noise and imbalance
• Cracking or damage of the plastic bracketry 
• Bearing or tub damage from improperly secured components

Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.

This power cord assembly restores a secure electrical connection to your appliance so it can safely receive power. It replaces a worn, damaged, or faulty cord to help prevent interruptions and poor contact during normal use. What it does:

• Re-establishes the appliance's main power connection for reliable operation
• Replaces frayed, burnt, or damaged cord insulation and terminals
• Can stop intermittent power loss, sparking, or poor contact at the cord connection
• Provides the correct OEM-fit electrical cord and connector interface

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely and avoid pinching or kinking the cord.

The Drain Hose Assembly is an OEM component specifically designed for LG washing machines. It safely directs contaminated water from the washing machine to a drain source such as a utility sink or standpipe.  

Causes of a faulty drain hose can include splits, cracks, clogs, or detachment from fittings due to wear over multiple machine cycles and years of use handling heated, soap-filled water.

Symptoms of a bad drain hose assembly include:

• Water leaks onto the floor during drain cycles  
• Clogs in the hose restricting drain flow
• Detachment from machine or drain outlet connection point

This OEM LG part is also compatible with select Sears/Kenmore models.

This hanger assembly replaces a worn or broken pivot that helps support and guide a refrigerator/freezer door. Restores proper door alignment and smooth opening so the seal closes correctly and the door operates as intended. What it does:

• Provides the pivot point that supports the door and enables smooth swing motion
• Keeps door aligned to maintain an effective gasket seal and prevent drafts
• Replaces worn, cracked, or bent pivot hardware that can cause uneven or binding doors
• Works with the existing hinge components to restore stable door operation

• Disconnect power and remove any stored items from the door before starting
• Support the door during removal to prevent dropping or damage to the cabinet
• Use basic hand tools; avoid over-tightening fasteners to prevent stress on the part
• If alignment issues persist after replacement, check hinge and strike components for wear

This PCB assembly is the appliance's main electronic control board. It replaces a damaged or faulty control board to restore programmed cycles and electronic functions for models that use this OEM part number. What it does:

• Controls user interface inputs, cycle selection, and machine operation logic
• Manages power delivery to valves, motors, and sensors through relay and driver circuits
• Detects and responds to sensor signals to coordinate wash/dry/heating sequences
• Can stop or err if the board fails, causing no power, unresponsive controls, or erroneous error codes

• Disconnect power and water before beginning any repair
• Take photos or label wiring before disconnecting harnesses to ensure correct reassembly
• Handle the board by the edges and avoid static discharge; use an anti-static wrist strap if available

This hose clamp secures a rubber hose connection to prevent leaks where the hose meets its fitting. A tight, uniform seal helps maintain proper water flow and keeps the appliance operating reliably.

• Provides a tight, 360-degree seal around the hose barb/fitting
• Helps correct issues like water leaks at the hose connection point
• Maintains correct hose attachment during operation and vibration
• Step-less ear design distributes clamping force evenly

• Unplug power and shut off water supply before servicing
• Note clamp orientation and hose routing before removal
• Use appropriate ear-clamp pincers or pliers to compress the clamp evenly
• Check the hose and fitting for wear; replace if cracked or deformed

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

This hose clamp secures a rubber hose connection to prevent leaks where the hose meets its fitting. A tight, uniform seal helps maintain proper water flow and keeps the appliance operating reliably.

• Provides a tight, 360-degree seal around the hose barb/fitting
• Helps correct issues like water leaks at the hose connection point
• Maintains correct hose attachment during operation and vibration
• Step-less ear design distributes clamping force evenly

• Unplug power and shut off water supply before servicing
• Note clamp orientation and hose routing before removal
• Use appropriate ear-clamp pincers or pliers to compress the clamp evenly
• Check the hose and fitting for wear; replace if cracked or deformed

This tub clamp secures the washer tub assembly or related hoses to keep components aligned and reduce movement during operation. It helps restore proper fitment so the tub stays stable and functions quietly. What it does:

• Holds the tub or tub-related components in place to prevent shifting during cycles
• Helps reduce vibration and noise caused by loose tub mounting
• Maintains correct alignment of hoses and seals to reduce leak risk
• Used when a worn or broken clamp allows excessive tub movement

• One tub clamp

• Turn off power and water supply before beginning any repair
• Inspect surrounding components (hose, seal, mounting points) and replace if damaged
• Use common hand tools; secure clamp evenly to avoid twisting the tub or hoses

A replacement hose clamp that secures a flexible hose to its fitting to help prevent leaks and disconnections. Restores a tight, reliable seal so hoses stay seated during normal use. What it does:

• Holds a rubber or plastic hose firmly to a pump, valve or connection to prevent leaks.
• Helps stop hose pull-off that can cause water leaks or appliance interruptions.
• Commonly replaced when clamps are corroded, bent, cracked or missing.
• Works as a low-cost repair to restore a secure hose connection without replacing the hose assembly.

• Disconnect power to the appliance and shut off the water supply before servicing.
• Use the correct tool (slip-joint pliers for spring-style clamps or a screwdriver for screw-type clamps) and avoid pinching the hose.
• Inspect the hose and fitting for damage; replace the hose if it's cracked or excessively worn.
• After installing, restore power/water and run a short test cycle or check for leaks.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

The Door Boot Seal is an OEM component for LG washing machines. Located around the washer door opening, this rubber gasket creates a tight seal when the door is closed, containing water inside the tub and preventing leaks.

Symptoms of a bad door boot seal include:

• Water leaks from the door area while washing cycles run 
• Stains around the opening from residual water after use
• Loose or sagging seal no longer making full contact 

Causes stem from everyday wear over repeated use, cracks from bending repeatedly during opening/closing, or damage or tears in the rubber. 

Compatible with Sears models as well. Dependable functionality is assured with the installation of this OEM part.
 

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

The Inner Door Boot Seal Clamp is an OEM part for LG washing machines. The clamp's primary function is to secure the door boot seal in place, preventing leaks during the wash cycle. 

Causes of a bad Inner Door Boot Seal Clamp can include corrosion due to exposure to moisture and detergent, loss of tension over time, or physical damage which can lead to a compromised seal.

Symptoms of a bad Inner Door Boot Seal Clamp include:

• Water leaking from the front of the washing machine
• Visible rust or damage on the clamp
• The door boot seal coming loose or falling off

This genuine LG OEM replacement part is also compatible with some Kenmore models. 

This door boot gasket forms the flexible seal between the outer tub and cabinet opening on a front-load washer to keep wash water contained. Replace a torn or moldy boot to stop leaks and lingering odors.

• Creates a watertight seal between the outer tub and the door opening
• Flexes with drum movement to maintain a reliable barrier during wash and spin
• Helps resolve leaks at the door, visible rips or cracks, water on the floor after a cycle, and musty smells that persist after cleaning

• Unplug the washer and turn off water supply before servicing
• Remove the front panel as needed; note the boot's orientation before removal
• Clean mounting grooves; seat the new boot evenly all the way around and secure clamps firmly
• Run a quick cycle to check for leaks after reassembly

The Damper Assembly is an OEM replacement part for LG washing machines. It is a critical component that helps regulate the balance and vibration levels during the spin cycle.

Causes of a bad damper assembly in a washing machine can include excessive wear and tear due to repeated high-speed spinning, damage from excessive vibrations or unbalanced loads, or failure of the internal components responsible for dampening and stabilizing the tub motion.

Symptoms of a bad washing machine damper assembly include:

• Excessive shaking or vibrations during the spin cycle
• Loud thumping or banging noises
• The washer visibly moving or walking across the floor
• Potential leaks due to increased stress on the tub and other components

This OEM LG part is also compatible with Sears/Kenmore models.

The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.

Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.

Symptoms of a bad hinge pin include:

• Difficulty opening or closing the washer door
• Door not staying securely closed during operation
• Squeaking or grinding noises when the door is moved
• Visible wear or damage to the hinge pin

This OEM LG part is also compatible with Sears/Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.