Parts for Poulan PP4620AV TYPE 2: Chassis / Bar / Handle Parts

Replacement screw for brush cutters, chainsaws, and trimmers. Used to secure various components. Replace if stripped, missing, or damaged during use.

Replacement handle for gas chainsaws. Installs on the body to provide grip and control. Order a new handle if yours is cracked, broken, or damaged.

Replacement mounting screw for chainsaws. Secures internal components and housing parts. Order a new screw if the original is stripped, missing, or damaged.

Replacement spring for chainsaws. Used in various internal mechanisms. Replace if broken, stretched, lost tension, or missing to restore proper function.

Replacement handle for gas chainsaws. Installs on the body to provide grip and control. Order a new handle if yours is cracked, broken, or damaged.

Front handlebar mounting screw for chainsaws. Secures the front handle to the chassis. Replace if stripped, missing, or damaged during maintenance.

If your chainsaw won't accelerate or runs at one speed, the throttle cable likely needs replacement. Connects trigger to carburetor for engine control.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

Recoil spring for chainsaw starter mechanism. Applies tension to pulley for rope retraction. Replace if worn, rusted, broken, or damaged to restore operation.

Pull starter skipping or slipping when starting? The starter hub connects the recoil pulley to the engine. Simple hand tool repair in under an hour.

Shoulder screw for chainsaws. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Flywheel washer for chainsaws, trimmers, and blowers. Replace if worn, corroded, or during flywheel maintenance to ensure proper spacing and function.

This is a small vent plug that fits into the fuel tank of a chainsaw, allowing air to enter the tank as fuel is consumed. It maintains proper pressure inside the tank to ensure consistent fuel flow to the carburetor. Replace this vent if the chainsaw stalls under load, loses power during cutting, or if the fuel tank appears to build up vacuum pressure.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

This is a clip that is used as a fastener in several types of lawn and garden equipment. Unlike nuts and screws with threads, the clip has prongs that attach to the threads of screws and bolts to offer better stability. When the clip is tightened, it acts as a locking mechanism to keep other parts in place. This allows the use of a nut without utilizing a lock washer. These clips can become damaged, brittle, or even break and will need to be replaced. Take a screwdriver and pull up the pins on the clip, which will result in feeling less tension around the component. At this point, the clip can be removed and a new one can be placed in the same position. Press the clip onto the nut or screw and push the pins into place. The rest of the machine can be reassembled and used as normal.This clip is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. It is compatible with string trimmers, chainsaws, and edgers manufactured by Poulan, Poulan Pro, Craftsman, Husqvarna, and Weed Eater.

This is the main body chassis that serves as the structural frame of the chainsaw, housing and supporting the engine, fuel system, and other internal components. It provides the mounting points for the handle, bar, chain, and all major assemblies. Replace this chassis if it is cracked, broken, or damaged from impact, which can cause excessive vibration, misalignment of the bar, or unsafe operation.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

Chain overheating or binding? This oil pump plunger and gear assembly restores proper bar and chain lubrication. Fits over 125 chainsaw models.

Chain not moving or slipping? Replace your chainsaw spur sprocket. Drives the chain around the bar. Should be changed every 2-3 chains for optimal performance.

Fix clutch slipping or poor engagement with this friction washer. Creates proper clutch fit for consistent power transfer in chainsaws and trimmers.

Chain won't spin or engages poorly? This chainsaw clutch assembly uses centrifugal force to engage the chain. Durable metal construction, sold as complete unit.

Needle bearings reduce friction in chainsaw engines. Replace when you notice unusual noise, vibration, or engine binding. Verify fit with your model number.

This is a dust cover that fits over the chainsaw's internal components to protect them from sawdust and debris. It helps keep the engine and clutch area clean during operation, extending the life of moving parts. Replace this cover if it is cracked, broken, or missing, which can allow debris to clog or damage internal mechanisms.

This is a small filter screen that sits in the oil supply line of a chainsaw, filtering debris from the bar and chain oil before it reaches the oiler mechanism. It ensures clean oil flows to the bar and chain for proper lubrication. Replace this filter if the chain is not receiving adequate oil, the bar is overheating, or the filter screen is visibly clogged or damaged.

If your chainsaw chain is coming loose or breaking off the guide bar, replace the chain catcher. This safety part prevents the chain from flying off.

Replacement bar bolt for chainsaw guide bar attachment. Secures the bar to the powerhead housing. Replace if threads are stripped, bolt is missing, or worn.

Bar plate for chainsaws. Secures the guide bar to the chainsaw body. Replace if cracked, warped, or damaged to ensure proper bar alignment and safe operation.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

This is a coiled rewind spring that fits inside the recoil starter assembly of a string trimmer. It stores the energy needed to retract the starter rope after each pull, allowing the engine to be started repeatedly. Replace this spring if the pull cord does not retract on its own, feels loose, or if the spring is visibly broken or unwound.

Fan housing for chainsaws. Covers and protects the internal cooling fan. Replace if cracked, broken, or missing to restore proper engine protection.

This is a replacement screw that is sourced from the manufacturer. The screw can be used for a range of applications on many types of lawn and garden equipment. One of the most common uses of this type of screw is to affix the housings, such as the starter cover, to the machine. Owners should refer to their equipment diagrams to ensure they are using the screws in the proper locations on their equipment. The screws could need to be replaced for any number of reasons. In some cases, they might become damaged or corroded and will need to have a replacement. Other times, the screws could become lost. When removing the housing from the equipment, the owner might misplace some of the screws and they will need to be replaced. Replacing the screws is simple and will only require a screwdriver. This is a genuine OEM screw that is sold individually. The screws can be used with more than 150 various models of chainsaws, string trimmers, and leaf blowers. Compatible brands include Poulan Weed Eater, Husqvarna, Jonsered, Poulan, and Poulan Pro.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

Replacement spring for chainsaws. Used in various internal mechanisms. Replace if broken, stretched, lost tension, or missing to restore proper function.

This is an OEM replacement part for select chainsaw models. The chain brake assembly restricts the clutch drum to stop the rotation of the chain and bring the machine to a halt when it is engaged. The chain brake assembly also includes the chain bar, which is used to adjust the tension in the chain. Over time and due to the friction and pressure, this brake assembly can fail or wear out. It will need to be replaced as soon as possible to prevent further damage or unsafe operation. This genuine part can provide an exact fit. This chain brake is designed to specific manufacturer standards by Husqvarna and designed to be used with select models of Poulan and Poulan Pro chainsaws. This assembly is sold as a single unit and does not include any additional hardware. Additional parts will require a separate purchase. The chain brake should only be replaced when the engine has completely cooled, and the spark plug has been disconnected. Gloves should also be worn during the repair or replacement process for added safety.

Secures the guide bar to your chainsaw. Replace if stripped, corroded, or threads are damaged. Confirm fit with your model number before ordering.

Bar adjuster tool for tightening loose chainsaw chains. Angular design makes bar adjustment quick and easy. Simple hand tool for proper tension.