Parts for Poulan PP4620AV TYPE 3: Chassis / Bar / Handle Parts

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation instructions and usage guidance, it is recommended to refer to the equipment diagram supplied specifically by the manufacturer. It's common over time and with regular usage for screws to easily become stripped, rusted, broken, or lost. This can lead to improper functionality of outdoor power equipment. It's important to always use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable metal. This replacement screw is designed to various models of trimmers and hedge trimmers, blowers, and chainsaws manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note this screw is a genuine OEM part made of durable, non-corrosive metal and is sold individually.

This throttle cable is a part used in chainsaws. It is responsible for controlling the speed of the engine. In order for a chainsaw to run properly, it will require a throttle cable that runs starting from the carburetor to the throttle trigger. Squeezing the throttle trigger allows more fuel into the chainsaw. This part is made of metal.For installation, a wrench and screwdriver are needed. Before beginning, Always double check and be sure that the engine has cooled completely. When installing, be sure that the throttle cable carefully slides into the right position, which should be on the side directly opposite of the carburetor. Once this is complete, ensure that the throttle cable is connected well to the carburetor. It is a genuine OEM part compatible with Poulan chainsaws. It is sold individually.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.

This starter hub is a genuine Husqvarna part, sold individually. This starter hub can be used as a replacement part for chainsaws. The starter hub for a chainsaw is a component of the recoil starter mechanism; the starter rope is coiled around a pulley that is held in place by the tension of a spring, and that spring is attached to the starter hub. The function of the starter hub is to rotate the pawls of the flywheel such that the engine is activated.A starter hub might have to be replaced in the event that it suffers damage that impedes it from connecting to or facilitating the operation of the pawls of the flywheel. If the starter rope does not turn on the engine when pulled, this could be a sign of damage in the starter hub. The starter hub can suffer damage from general wear and tear or overuse, and if this is the case, it should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter hub is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This vent plug is a genuine Husqvarna part, sold individually. This vent plug can be used as a replacement part in a chainsaw. The purpose of a vent plug in a chainsaw is to permit the flow of air into the oil tank of the appliance such that a vacuum is not created. The vent plug in a chainsaw might have to be replaced if the vent plug ceases to function. This could occur if the vent plug has been punctured, scraped, dented, warped, or eroded. If this occurs, the vent plug should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual. It is a simple replacement process that will require only basic tools to conduct.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vent plug is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

This is a clip that is used as a fastener in several types of lawn and garden equipment. Unlike nuts and screws with threads, the clip has prongs that attach to the threads of screws and bolts to offer better stability. When the clip is tightened, it acts as a locking mechanism to keep other parts in place. This allows the use of a nut without utilizing a lock washer. These clips can become damaged, brittle, or even break and will need to be replaced. Take a screwdriver and pull up the pins on the clip, which will result in feeling less tension around the component. At this point, the clip can be removed and a new one can be placed in the same position. Press the clip onto the nut or screw and push the pins into place. The rest of the machine can be reassembled and used as normal.This clip is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. It is compatible with string trimmers, chainsaws, and edgers manufactured by Poulan, Poulan Pro, Craftsman, Husqvarna, and Weed Eater.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

This is a plunger and gear assembly that provides lubricating oil to chainsaws. This part is compatible with over 125 chainsaws. Proper lubrication of the cutting chain is necessary for chainsaws as the rotation of the chain through the wood results in extreme heat and diminished ability to smoothly cut. Lubricating oil cools the chain and smooths the travel of the chain around the blade. Through continual use, the plunger and gear assembly will wear and cease to function. A sure sign of this occurs when the oil reservoir is full, but the chain is heating up and chewing rather than cutting wood. To replace the plunger and gear assembly, first, remove the chain and detach the bar. Then the clutch mechanism can be unscrewed, revealing the gear and plunger unit. Because contaminants can accrue in the reservoir and in the old assembly, it's best to discard any remaining oil safely and fill the reservoir with new oil. When replacing the gear and plunger assembly made by Jonsered, Husqvarna, and Poulan, it is best to use a genuine OEM replacement part such as this one, which is manufactured according to the specifications of the factory original.

This is a replacement part made to be used with a chainsaw. It is circular in shape with a star pattern on top of it. The spur sprocket is what drives the chain of the saw. Ideally, sprockets should be changed every two to three chains. The clutch assembly is usually replaced with the spur sprocket. This is an OEM part sourced directly from the manufacturer. It is sold individually.To replace a spur sprocket, first remove the top cover of the chainsaw and remove the spark plug to ensure the motor does not start. Remove the clutch and old sprocket. Lubricate the bearing if needed, install the new sprocket and then the new clutch. Place the spark plug back where it belongs and place the cover back on the chainsaw. The saw is now ready to be used. As always, when replacing parts on machinery ensure all personal protective equipment is worn.The spur sprocket is manufactured by Husqvarna, Jonsered, Poulan, and Poulan Pro. It is compatible with a number of these manufacturers' chainsaws chain component.

Here is an authentic clutch friction washer that is sourced from the manufacturer. It is for use with several types of handheld outdoor power equipment. Other names for the part include clutch friction disk and clutch washer. The washer works as a friction disk that will help create the proper fit between components in the machine, which helps to engage the clutch. It is made from durable metal. The clutch friction washer that comes with the machine tends to be durable, but it may still need to be replaced at some point. The washer could become corroded, or it could break. It could also become lost when the owner is performing other maintenance on the machine. A wrench and screwdriver will typically be needed to conduct the replacement. Owners should check their manuals to ensure the correct location for installing the washer. The genuine OEM clutch friction washer is sold individually. It can work with more than 150 models of chainsaws, hedge trimmers, and string trimmers. Brands that have models compatible with the part include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

The clutch is designed to use centrifugal force to connect the shafts, while a drive shaft is nested inside. The clutch is made of durable metal and is sold as an individual assembly. These clutches are durable, but they also have the ability to function well beyond when they should be replaced. Therefore, even if the clutch hasn’t failed, it is important to pay attention to the performance of the engine. The repair is relatively simple and requires only a screwdriver and pliers to complete. Always wear gloves and disconnect the spark plug before performing any repairs on engine components like this clutch assembly. This OEM clutch assembly is manufactured to exact standards and is compatible with select models of gas chainsaws and other outdoor power equipment. It fits units from Poulan, Weed Eater, Husqvarna, and Jonsered.

The thrust screw is made of durable metal and will sit in between a stationary part and a rotating surface within many types of chainsaws. The purpose of the thrust washer is to support the load or motion on a shaft while preventing motion on the shaft. The thrust washer is used to create a surface that supports a bearing where there are moving parts. If the thrust washer becomes damaged or worn, it cannot support the bearings and it may also become damaged. When this occurs, it may cause a rattling or squealing noises. When removing the thrust washer for a replacement, the reel and line assembly needs to be removed. A small screwdriver of a pick can be used to disengage the C-clip so the user can remove the plunger, spring, and thrust washer. Replace the part with a new thrust washer and reassemble the other components.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The thrust washer is made for use with chainsaws manufactured by Poulan, Poulan Pro, Craftsman, and Husqvarna.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This is an authentic replacement part for the chain catcher used on chainsaws. The chain catcher is an important safety feature. In the event that the chainsaw chain becomes loose from the track or breaks, the chain catcher keeps it from sailing off the guide bar. The chain catcher is made from metal and it tends to be very durable. However, corrosion and other types of damage may prevent it from being effective. If the chain catcher is damaged or if it is lost, it should be replaced before using the chainsaw again. This is a genuine OEM replacement chain catcher that is sold individually. The screw used to secure the catcher to the chainsaw is sold separately. Buyers may want to buy the parts at the same time. This piece is specifically for use with chainsaws. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro. When purchasing the chain catcher, buyers must be sure it is the correct option for their make and model.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

This is a replacement screw that is sourced from the manufacturer. The screw can be used for a range of applications on many types of lawn and garden equipment. One of the most common uses of this type of screw is to affix the housings, such as the starter cover, to the machine. Owners should refer to their equipment diagrams to ensure they are using the screws in the proper locations on their equipment. The screws could need to be replaced for any number of reasons. In some cases, they might become damaged or corroded and will need to have a replacement. Other times, the screws could become lost. When removing the housing from the equipment, the owner might misplace some of the screws and they will need to be replaced. Replacing the screws is simple and will only require a screwdriver. This is a genuine OEM screw that is sold individually. The screws can be used with more than 150 various models of chainsaws, string trimmers, and leaf blowers. Compatible brands include Poulan Weed Eater, Husqvarna, Jonsered, Poulan, and Poulan Pro.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This is an OEM replacement part for select chainsaw models. The chain brake assembly restricts the clutch drum to stop the rotation of the chain and bring the machine to a halt when it is engaged. The chain brake assembly also includes the chain bar, which is used to adjust the tension in the chain. Over time and due to the friction and pressure, this brake assembly can fail or wear out. It will need to be replaced as soon as possible to prevent further damage or unsafe operation. This genuine part can provide an exact fit. This chain brake is designed to specific manufacturer standards by Husqvarna and designed to be used with select models of Poulan and Poulan Pro chainsaws. This assembly is sold as a single unit and does not include any additional hardware. Additional parts will require a separate purchase. The chain brake should only be replaced when the engine has completely cooled, and the spark plug has been disconnected. Gloves should also be worn during the repair or replacement process for added safety.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.