Chipper Shredder Fastener
Genuine Mtd part
By: Mtd
Part Number: 710-0805A
Hex cap screw secures components on lawn tractors, tillers, snowblowers, and garden equipment. Replace if broken, stripped, or missing.
More
$4.95
- Compare At:
-
$5.84
- You Save:
-
$0.89
Genuine Mtd part
By: Mtd
Part Number: 710-1039
Hex screw that secures components on lawn tractors and outdoor power equipment. Replace if screw is stripped, missing, or damaged during maintenance.
More
$4.95
- Compare At:
-
$5.94
- You Save:
-
$0.99
Genuine Mtd part
By: Mtd
Part Number: 712-0266A
This genuine OEM replacement jam nut attaches to the idler bracket on a tiller. Jam nuts are a special type of nut designed to not unthread or strip out over time. Jam nuts are usually fastened on with another standard nut and then the two nuts are tightened against each other. Jam nuts can be easily identified from a standard nut because they are roughly half the size. Jam nuts can be lost while making repairs because of their small size. If lost, it might not affect the idler bracket immediately, but over time the standard nut may begin to slip or unthread. Therefore, the jam nut should be replaced as soon as possible. When making this replacement, be sure to unthread the standard nut as well and then tighten them both together using a wrench. This replacement jam nut is a high-quality part sourced from its original manufacturer. It is compatible with Troy-Bilt, Yard Man, Huskee, MTD, Ryobi, Yard Machines, and Cub Cadet tillers. This part does not ship with any additional hardware.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Mtd part
By: Mtd
Part Number: 712-04217
This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Genuine Mtd part
By: Mtd
Part Number: 712-3004A
This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.
More
$4.31
- Compare At:
-
$5.13
- You Save:
-
$0.82
Genuine Mtd part
By: Mtd
Part Number: 715-0150
This replacement part is a pin. This is a genuine replacement part made by MTD. Pins are typically small but important parts of many machines and appliances. They are responsible for holding different parts together to allow for the machine to operate smoothly. A new pin might be needed if the current one is missing or damaged. Pins can easily become lodged into place due to normal wear and tear. This repair should be fairly simple and require only common household tools such as a screwdriver and possibly pliers. Refer to the proper user manual before attempting to replace this part. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Genuine Mtd part
By: Mtd
Part Number: 716-0865
Snap ring fastener for lawn mowers and outdoor power equipment. Secures components on shafts and axles. Replace if worn, broken, or missing.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Mtd part
By: Mtd
Part Number: 723-04008A
Secures the chute assembly on your grass catcher attachment. Replace if the strap is cracked, broken, or missing to properly hold the chute in place.
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Mtd part
By: Mtd
Part Number: 736-0237
Replacement flat washer for outdoor power equipment. Installs between bolts and surfaces to distribute load. Replace if lost, damaged, or worn out.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Genuine Mtd part
By: Mtd
Part Number: 912-0158
Center hex nut for lawn mowers, snow blowers, and tillers. Secures blade assemblies and drive components. Replace if stripped, corroded, or missing.
More
$4.14
- Compare At:
-
$4.41
- You Save:
-
$0.27
Genuine Mtd part
By: Mtd
Part Number: 912-0431
Hex lock nut secures bolted joints on outdoor lawn equipment. Replace if threads are stripped, nut is missing, or won't hold proper tension.
More
$5.50
- Compare At:
-
$6.54
- You Save:
-
$1.04
Genuine Mtd part
By: Mtd
Part Number: 912-3027
The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.
More
$4.95
- Compare At:
-
$5.94
- You Save:
-
$0.99
Genuine Mtd part
By: Mtd
Part Number: 914-0114
Square key fastener for lawn tractors and outdoor power equipment. Secures drive components by fitting into shaft keyways. Replace if worn or missing.
More
$4.43
- Compare At:
-
$4.70
- You Save:
-
$0.27
Genuine Mtd part
By: Mtd
Part Number: 914-0507
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Mtd part
By: Mtd
Part Number: 936-0336
Flat washer for lawn mowers and outdoor power equipment. Replace if washer is missing, damaged, or corroded to ensure proper fastening and fit.
Do-It-Yourself Stories from Customers like You
Needed parts Randy K. • Ramsey , MN • July 09, 2018
Replaced parts
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Mtd part
By: Mtd
Part Number: 710-0672
$7.31
- Compare At:
-
$8.16
- You Save:
-
$0.85