Chipper Shredder Fastener
Genuine Mtd part
By: Mtd
Part Number: 748-0234
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Mtd part
By: Mtd
Part Number: 712-04287
This replacement part is a nut. This is a genuine replacement part made by MTD. Nuts are small but typically an important part of many different machines. These parts allow for pieces of the machine to stay secure and in place during use. Nuts usually work with other small parts such as screws and washers to ensure the proper functioning of the machine.A new nut might be needed if the current one is visibly missing or damaged. These parts can become worn down over time due to normal wear and tear. If this is the case it is recommended that it be replaced as soon as possible. This repair should be fairly easy and only require common household tools. Be sure the engine is completely cooled down before attempting to replace this part.This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.
More
$6.43
- Compare At:
-
$7.59
- You Save:
-
$1.16
Genuine Mtd part
By: Mtd
Part Number: 726-0135
$8.57
- Compare At:
-
$9.50
- You Save:
-
$0.93
Genuine Mtd part
By: Mtd
Part Number: 938-0826
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Mtd part
By: Mtd
Part Number: 951-14397
This part can be used to replace a worn or broken rear stud to securely attach the shroud and keep it in place.Engine shrouds are critical for ensuring that air is properly circulated around the engine to keep it cool. Without an engine shroud overheating can occur quickly and cause serious engine damage. This rear stud is intended to attach the back of the engine shroud and secure it in place. This starter/shroud rear stud is a genuine replacement part that has been sourced directly from the manufacturer. This replacement starter/shroud rear stud fits various different models of MTD, Cub Cadet, Husky,Troy-Bilt, and Yardman outdoor power equipment such as lawnmowers, log splitters, and trimmers. Please note this starter/shroud rear stud is sold individually.
More
$10.26
- Compare At:
-
$11.29
- You Save:
-
$1.03
Genuine Husqvarna part
By: Husqvarna
Part Number: 596238701
$5.65
- Compare At:
-
$5.95
- You Save:
-
$0.30
Genuine Husqvarna part
By: Husqvarna
Part Number: 596322601
$5.65
- Compare At:
-
$5.95
- You Save:
-
$0.30
Genuine Husqvarna part
By: Husqvarna
Part Number: 596434402
$5.65
- Compare At:
-
$5.95
- You Save:
-
$0.30
Genuine Mtd part
By: Mtd
Part Number: 712-0116
$4.67
- Compare At:
-
$4.81
- You Save:
-
$0.14
Genuine Mtd part
By: Mtd
Part Number: 726-04101
$7.31
- Compare At:
-
$8.09
- You Save:
-
$0.78
Genuine Mtd part
By: Mtd
Part Number: 736-04461
Genuine Mtd part
By: Mtd
Part Number: 936-0335
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Mtd part
By: Mtd
Part Number: 710-0599
A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color.
Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.
More
$4.60
- Compare At:
-
$5.47
- You Save:
-
$0.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-0528
There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.
More
$4.65
- Compare At:
-
$5.49
- You Save:
-
$0.84
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 918-04145
This coupler is a genuine MTD part, sold individually. This coupler can be used as a replacement part in a log splitter. The purpose of the coupler in a log splitter is to affix the drive shaft to the hydraulic pump so that the log splitter can be properly operated.The primary sign of damage to a coupler is excessive vibration and unusual noise. If this occurs, the coupler should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This coupler is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard Machines.
More
$110.73
- Compare At:
-
$131.77
- You Save:
-
$21.04
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 936-0351
This is a flat washer that can be used with bolts and screws on many kinds of lawn and garden equipment. Before a bolt can be fastened to a surface, a fastener needs to be inserted through the end. A washer can be used with these items to help distribute the load. Washers are also responsible for decreasing heat and friction while a fastener is tightened to a surface. Washers can also be used to offer electrical insulation or operate as spacers.Even though washers are made of durable materials, they can be damaged over time. If the shape of the washer is bent or cut in half, this indicates that it needs to be replaced. A socket wrench or screwdriver can be used to make the replacement. Remove the screw or bolt, remove the fastener, and add the washer to the fastener before it screws back in.This flat washer is a genuine OEM replacement part sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, and edgers by Craftsman, MasterCut, Cub Cadet, Turf King, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD. It comes as an individual part.
More
$4.70
- Compare At:
-
$5.59
- You Save:
-
$0.89
Out Of Stock
Usually ships within 4 - 14 days