Parts for Ge JGP970SEK1SS: 01 - Control Panel & Cooktop Parts

Black profile gas valve control knob for cooktops. Replaces cracked, stripped, loose, or missing knobs. Installs onto burner valve stem for smooth adjustment.

Color: brushed chrome. Measures about 2 inches in diameter.

Replace your cooktop's selector knob if cracked, broken, or missing. This glossy black control knob installs on the control panel to operate settings.

Control knob for selecting cooktop settings and temperatures. Installs on the control panel. Replace if cracked, broken, or worn from regular use.

Rubber foot that attaches to the bottom of cooktop grates. Replace if cracked, worn, missing, or loose to prevent grates from sliding and scratching.

The Maintop Glass and Frame Assembly is an OEM component  designed for GE ranges. It consists of tempered glass surrounded by an insulating frame. This assembly serves as the complete cooking surface and protective barrier within the oven. 

Causes of a bad maintop glass and frame assembly can include wear and tears over time, accidental damage from being dropped or impacted, or flaws in the materials. Repeated heating and cooling cycles put stress on the glass and bonding between the glass and frame. 

Symptoms of failure include:

• Visible cracks or breaks in the glass  
• The glass becoming loose from the retaining frame
• Gaps appearing between the glass and surrounding frame
• Hot or cool spots developing on the cooking surface

This genuine OEM GE replacement is compatible with  Hotpoint, RCA and select Kenmore models.

Replace a cracked, chipped, or missing gas cooktop grate. Restores stable support for pots and pans over the burner. Single grate assembly.

Replacement burner grate for gas cooktops. Supports pots and pans over burner flame. Replaces cracked, chipped, or worn grates to restore stability.

This machine screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in securing the burner head to the gas range top so that it can be used for cooking. If the burner head becomes loose or the screw is missing, it should be replaced. For safety reasons, the burner should not be used until this screw is replaced; the burner head could shift during cooking and lead to a fire. To start, disconnect the gas and power from the stove to prevent accidental ignition of the burner. Make sure the burners are not hot. Remove the burner grate and burner cap from the burner that is missing a screw. Install the new screw in the hole and tighten it with a screwdriver. Put the burner cap and burner grate back on the stove and reconnect the gas and power. Periodic inspection of the burner heads and all associated screws and parts on the stovetop will prevent accidents and keep the stove working correctly. This screw is a silver, metal part that is sold individually. It is designed for use in gas rangetops manufactured by General Electric and Hotpoint.

Burner head sits on top of the burner base on gas cooktops. Replace if warped, cracked, or causing uneven flame distribution across the burner surface.

Burner head component that sits atop the gas burner base on cooktops and ranges. Replace if warped, cracked, or no longer fitting correctly.

B Burner

C burner

Burner won't light or clicking with no spark? This igniter creates the spark to light gas burners. Easy press-fit installation takes 15 minutes.

Burner base that sits beneath the burner cap on your cooktop. Replace this component if damaged, cracked, or missing to restore your burner's appearance.

Burner base for gas cooktops, secures to cooktop surface and holds igniter assembly. Replace if cracked, broken, or damaged during repairs.

Burner base installs beneath the burner cap on gas cooktops. Replace if cracked, warped, or dome-shaped to restore proper flame coverage and alignment.

Approx 3 inches in diameter

Black. D Burner

Grey. D Burner

Black burner cap for gas cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or missing for proper cooking.

Black burner cap for gas cooktops. Covers the burner head to distribute flame evenly. Replace if cracked, chipped, or discolored from heat exposure.

Grey burner cap for gas cooktops and ranges. Covers the burner head assembly. Replace if cracked, chipped, discolored, or missing for proper flame distribution.

Black burner cap for cooktop ranges. Replaces cracked, chipped, or missing caps that sit on top of the burner head. Restores appearance and function.

Grey burner cap for gas cooktop. Sits atop the burner base to distribute flame evenly. Replace if cracked, chipped, discolored, or missing.

Black. B Burner

Black. B Burner

Grey. C Burner

Black. C Burner

Replace your cracked or missing cooktop burner cap. This cap sits on top of the burner head to distribute flame evenly. Order now for fast delivery.

Black burner cap for gas cooktops and ranges. Sits on top of the burner head to distribute flame. Replace if cracked, chipped, discolored, or missing.

Note: The part is approximately 4" in diameter.

Small

Note: The part is approximately 2-3/8" in diameter.

Seals burner assembly to cooktop surface, preventing gas leaks and ensuring proper ignition. Replace if cracked, brittle, or damaged during cleaning.

Seals and protects the cooktop control panel from moisture and debris. Replace if worn, cracked, or loose to prevent damage. Verify fit with your model number.

Seal for cooktop control knobs that prevents cleaning fluids and spills from entering the dial area. Replace when worn or cracked to protect controls.

Replace your cooktop's control panel seal to prevent moisture and debris from entering the control area. Essential when seal shows wear or damage. Verify fit with your model number before ordering.

Burner wire harness assembly routes power between the control and burner components. Replace if wires are damaged, corroded, frayed, or melted.