Need Help?
Call or text
Show parts
The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth. Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes. As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces
This part is discontinued by the manufacturer and is no longer available for purchase.
This dishwasher's touchpad and control panel assembly make up the main control unit of the appliance. This part is designed for installation on the front panel of several brands of dishwashers. The touchpad is in the front and contains the buttons that control the main functions of the dishwasher. Wash, rinse, and temperature control can all be toggled through the touchpad, sending vital information to the control board located to the rear of this component. If the touchpad no longer responds to commands, a replacement control panel assembly should fix the problem. A voltage tester can indicate whether this is the problem. To install this part, unplug the dishwasher from its main power source and slide from the wall or counter. The perimeter of the dishwasher door holds screws that can be removed to take off the front panel and trim. After removing the front panel, open the dishwasher door and remove the fastening screws for the control panel assembly that are located on the top edge of the door and sides. Push the fastening clips around the control panel assembly and the component should pop out. Unhook the wire harness and make note of the wiring diagram for replacement. Repeat these steps in reverse to install the new part.This Whirlpool dishwasher touchpad and control panel assembly is a genuine OEM product sourced directly from Whirlpool. This part is only available individually and is not included with any other components. This part is compatible with Whirlpool, JennAir, KitchenAid, and Kenmore appliances.
The Door Handle Spring is an OEM replacment part for Whirlpool built-in dishwashers. It applies inward tension to assist in opening the dishwasher door after a cycle completes. Proper spring force prevents accidental openings during active washing and rinsing stages.
Symptoms of a failing door handle spring can include:
Causes related to the natural fatigue of the coiled wire over thousands of usage cycles. Loss of elastic properties compromises the spring's ability to counteract the weight and seal force of the heavy dishwasher door panel.
This OEM Whirlpool replacement spring restores smooth, convenient door access at appropriate times. Compatible also with some KitchenAid models.
The Door Latch Actuator is an OEM part for Whirlpool dishwashers. This part securely latches the dishwasher door, ensuring that it stays closed during operation and that the wash cycles run smoothly. The actuator interacts with the door latch to activate the locking mechanism, providing a secure seal to prevent leaks.
Causes of a bad door latch actuator can include regular wear and tear, mechanical failure, or damage from accidental impacts.
Symptoms of a bad door latch actuator include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
The Dishwasher Fuse Kit is an OEM replacement part for Whirlpool dishwashers. It contains the necessary thermal fuses that protect the dishwasher's electrical system from overheating or short circuits. These fuses are critical safety components that help prevent potential fire hazards or damage to the appliance. When replacing this fuse, the included wire harness must be replaced as well.
Symptoms of a blown dishwasher fuse kit include:
Causes of a faulty fuse kit can include electrical surges, wiring problems, component malfunctions leading to overcurrent situations, or simply wear and tear over time.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Dual digit green display is a two-character numeric module for the appliance control panel, restoring clear numeric readouts so timers, countdowns and basic status information are visible and easy to read. What it does:
This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.
The Dishwasher Door Latch Handle is an OEM part for Whirlpool dishwashers. It ensures that the dishwasher door closes securely, enabling the machine to operate correctly. This handle engages the latch mechanism, providing a tight seal to prevent leaks and allowing the dishwasher to run its cycles efficiently.
Over time, the door latch handle can wear out or break due to frequent use, exposure to harsh detergents, or mechanical failure. Causes of a bad door latch handle include physical damage, internal component wear, or misalignment.
Symptoms of a bad door latch handle include:
The Door Latch Bracket is an OEM part for Whirlpool dishwashers. This bracket is crucial for securing the dishwasher door latch, ensuring that the door stays closed during operation. A properly functioning door latch bracket helps maintain a tight seal, preventing water leaks and enabling the dishwasher to run efficiently.
Causes of a bad door latch bracket can include regular wear and tear, damage from repeated door openings and closings, or physical impact that compromises its integrity. A malfunctioning bracket can lead to door alignment issues and ineffective sealing.
Symptoms of a bad door latch bracket include:
Handle not included. For black handle use WP8534984. For white handle use WP8534985. For bisque use 8534986
The Door Switch is an OEM part for Whirlpool dishwashers. It plays a crucial role in ensuring the dishwasher operates only when the door is securely closed. The switch signals the control board that the door is shut, allowing the wash cycle to begin safely.
You should replace the door switch if it becomes faulty or damaged. Causes of a bad door switch can include wear and tear from regular use, electrical issues, or physical damage from forceful closing of the door.
Symptoms of a bad door switch include:
This is a genuine 4-24 x 3/8 screw used to fasten trim and components on compatible appliance assemblies. It provides a secure, vibration-resistant connection so panels and parts stay properly aligned during use. What it does: