Crosley Handle

This door handle spacer fits between the handle and the door panel, providing the correct standoff and a clean, finished look. Replacing a worn spacer helps keep the handle secure and aligned.

• Maintains proper spacing between the handle and door surface
• Helps stabilize a loose or wobbly handle
• Replaces cracked, discolored, or missing spacers
• Color: Bisque (cream/tan finish) to match compatible appliances

• Disconnect power and allow the appliance to cool before servicing
• Support the door and handle while removing mounting screws
• Transfer or replace spacers on both sides of the handle if needed; do not overtighten screws
• Wear gloves to protect hands and avoid stressing glass panels

This replacement door handle restores a sturdy, comfortable grip on your refrigerator door. It replaces cracked or loose handles so you can open and close the door safely while keeping the appliance's appearance clean and finished.

• Provides the leverage and grip needed to open and close the door
• Restores appearance when the original handle is worn, discolored, or broken
• Helps prevent stress on the door gasket by giving a proper grab point
• Common signs of failure: handle is cracked, loose, wobbly, or missing

• Disconnect power before servicing; turn off water supply if working near a dispenser line
• Open the door and remove any decorative end caps to access the mounting screws
• Support the handle, remove screws, position the new handle, and reinstall using existing hardware; do not overtighten
• The handle is secure and the door opens and closes smoothly

This replacement door handle restores a secure, easy-to-grip surface for opening and closing the appliance door and refreshes the door's appearance. Designed to match factory fit and function when the original handle is cracked, loose, or missing. What it does:

• Provides a firm, ergonomic grip for opening and closing the appliance door.
• Restores proper mounting and alignment if the original handle is damaged or wobbly.
• Helps prevent injury from sharp or broken handle edges.
• Improves the appearance of the appliance door when the original is faded, cracked, or missing.

• One replacement door handle

• Before starting, disconnect power to the appliance or unplug it to reduce shock risk.
• Remove any trim or access panels per the service instructions to access handle fasteners.
• Keep original screws and small parts; use the OEM diagram to confirm orientation and placement.
• Do not overtighten fasteners—snug only to avoid cracking the handle.

The Door Latch Assembly is an OEM replacement part for Whirlpool dishwashers. It securely fastens the dishwasher door closed during wash cycles to contain water, detergent, and wash motions within the tub. This dishwasher door switch assembly does not include the handle. It includes two switches and a holder.

Over time, latch components can wear from continual use and lose their ability to lock the door. Exposure to water and detergent may also cause corrosion or cracking.

Symptoms of a bad door latch assembly include:

• The dishwasher door not closing fully or securely during cycles  
• Gaps around the door allowing water and air leakage
• The door popping or opening unexpectedly mid-cycle
• Dishwasher will not start

This Whirlpool part fits dishwashers from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and select Kenmore models.

This replacement door handle restores a secure grip for opening and closing the dryer door, making it easy to access the drum and load laundry. It fits the original handle location and matches OEM form and function. What it does:

• Replaces a cracked, broken, or missing dryer door handle for reliable opening and closing
• Restores a solid grip when pulling the door open
• Stops the handle from wobbling or coming loose during normal use
• Helps ensure the door latches and aligns properly when closed

• One (1) door handle

• Disconnect power to the appliance before beginning any repair
• Typical installation requires removing the dryer door panel or accessing mounting screws; a screwdriver may be needed
• Handle attaches with screws or clips—align carefully and tighten snugly without over-torquing

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

This handle frame is the trim piece that mounts around a door handle to restore the appliance's finished appearance and cover the handle's fasteners. It replaces worn or damaged trim for a clean, secure handle look. What it does:

• Covers and protects the handle mounting area and hardware from dirt and wear
• Helps keep the handle securely seated and aligned on the door
• Restores the appliance's original finished appearance where trim is cracked, scratched, or missing
• Can reduce handle wobble when paired with intact mounting components

• One handle frame (trim) as shown

• Disconnect power to the appliance before starting any repair
• Removal/installation typically requires removing the handle and then fastening the trim with screws or clips
• Keep fasteners snug but avoid overtightening to prevent cracking the trim

The Door Handle is an OEM component for Frigidaire front-load washing machines. It serves as the central access point for loading and unloading clothes. The door handle is designed to withstand years of use with a durable grasp surface for wet hands. 

Symptoms of a bad door handle include:

• Looseness, wobbling, or detachment when held
• Chipped or cracked material on the handle surface
• Difficulty opening and closing the washer door 

Causes of failure can be regular heavy use of the handle over many cycles of washing. Natural wear and tear as well as occasional impacts also put stress on the handle mechanism.

This Frigidaire OEM part is also compatible with some Electrolux and Kenmore front-load washer models.

The Handle is an OEM replacement part for Frigidaire ovens. It is designed to provide a sturdy grip for opening and closing the oven door, ensuring ease of use and safety during cooking.

The handle can become worn or damaged over time due to regular use, exposure to heat, or accidental impact. Repeated opening and closing of the oven door can lead to loosening or breakage.

Symptoms of a bad handle include:

• The handle feeling loose or wobbly
• Difficulty in opening or closing the oven door
• The handle becoming detached from the door
• Visible cracks or damage to the handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.